main
Ray mp3924gu-z: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) eab903b
{
  "schema_version": 1,
  "type": "component",
  "slug": "mp3924gu-z",
  "title": "MP3924GU-Z",
  "brief": "Monolithic Power Systems Power Over Ethernet (PoE) Controllers, QFN-32(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "mp3924gu-z"
  ],
  "component": {
    "mpn": "MP3924GU-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "QFN-32(5x5)",
    "pin_count": 32,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Over Ethernet (PoE) Controllers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838151171665920",
    "parts": {
      "symbol": "mp3924gu-z.kicad_sym",
      "footprint": "mp3924gu-z.kicad_mod",
      "model_3d": "mp3924gu-z-etched.glb",
      "model_3d_plain": "mp3924gu-z.glb",
      "model_3d_step": "mp3924gu-z-etched.step",
      "model_3d_step_plain": "mp3924gu-z.step",
      "lbr": "mp3924gu-z.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "GATE1",
        "type": "output",
        "description": "MOSFET gate driver for port 1. Drives the external pass N-MOSFET for port 1. Float if not used."
      },
      {
        "number": "2",
        "name": "OUT1",
        "type": "input",
        "description": "Output voltage sense pin for port 1. Connect to the output interface return for detection, classification, voltage sensing, and current-limit foldback control. Float if not used."
      },
      {
        "number": "3",
        "name": "INT2",
        "type": "output",
        "description": "High-priority interrupt request pin. Open-drain output that pulls low when the selected high-priority interrupt source register is set and the interrupt is enabled. Tie to DGND if unused. Max sink 20mA (5mA recommended)."
      },
      {
        "number": "4",
        "name": "SGND1",
        "type": "input",
        "description": "Current-sense negative input for port 1 and port 2. Connect to the low-side terminal of the sense resistor with a Kelvin connection. Tie to DGND if unused."
      },
      {
        "number": "5",
        "name": "CLS5",
        "type": "input",
        "description": "Class 5 enable input. Internally pulled down to DGND via 50kΩ. Leave floating to disable Class 5 classification (802.3at-compliant); tie to VCC to enable Class 5 devices. Status latched at start-up/reset."
      },
      {
        "number": "6",
        "name": "AUTO",
        "type": "input",
        "description": "Automatic mode setting pin. Internally pulled up to VCC via 50kΩ. Float for automatic mode (default), tie to DGND for default shutdown mode. Status latched at start-up/reset."
      },
      {
        "number": "7",
        "name": "MID",
        "type": "input",
        "description": "Midspan mode setting pin. Internally pulled up to VCC via 50kΩ. Float for midspan mode (re-initiate detection every 2.8s), tie to DGND to disable midspan mode. Status latched at start-up/reset."
      },
      {
        "number": "8",
        "name": "INT1",
        "type": "output",
        "description": "Interrupt request pin for all interrupt source events. Open-drain output; pulls low when the interrupt register is set and interrupts are enabled. Tie to DGND if unused. Max sink 20mA (5mA recommended)."
      },
      {
        "number": "9",
        "name": "SCL",
        "type": "input",
        "description": "I2C clock input pin. Requires external pull-up (typically 4.7kΩ) to VCC. Tie to VCC if I2C interface is not used."
      },
      {
        "number": "10",
        "name": "SDAO",
        "type": "output",
        "description": "I2C serial data output pin (open-drain). Requires external pull-up (typically 4.7kΩ) to VCC. Connect SDAO to SDAI for non-isolated applications. Tie to DGND if I2C unused. Max sink 20mA."
      },
      {
        "number": "11",
        "name": "SDAI",
        "type": "input",
        "description": "I2C serial data input pin. Requires external pull-up (typically 4.7kΩ) to VCC. Connect SDAI to SDAO for non-isolated applications. Tie to DGND if I2C unused."
      },
      {
        "number": "12",
        "name": "EN",
        "type": "input",
        "description": "Enable input. Turns all internal circuits and four ports (except the VCC regulator) on/off. Tie EN to VCC to enable the device automatically. VHI ≥ 2.5V, VLI ≤ 0.4V."
      },
      {
        "number": "13",
        "name": "A0",
        "type": "input",
        "description": "I2C address setting pin (LSB). Tie to VCC or DGND to set the lower 4 address bits (address = 010 A3 A2 A1 A0). Latched at start-up/reset. Internally pulled up to VCC via 50kΩ."
      },
      {
        "number": "14",
        "name": "A1",
        "type": "input",
        "description": "I2C address setting pin. Tie to VCC or DGND to set the lower 4 address bits. Latched at start-up/reset. Internally pulled up to VCC via 50kΩ."
      },
      {
        "number": "15",
        "name": "A2",
        "type": "input",
        "description": "I2C address setting pin. Tie to VCC or DGND to set the lower 4 address bits. Latched at start-up/reset. Internally pulled up to VCC via 50kΩ."
      },
      {
        "number": "16",
        "name": "A3",
        "type": "input",
        "description": "I2C address setting pin (MSB of lower nibble). Tie to VCC or DGND to set the lower 4 address bits. Latched at start-up/reset. Internally pulled up to VCC via 50kΩ."
      },
      {
        "number": "17",
        "name": "DGND",
        "type": "power_in",
        "description": "Ground of the internal digital and analog circuit."
      },
      {
        "number": "18",
        "name": "SGND2",
        "type": "input",
        "description": "Current-sense negative input for port 3 and port 4. Connect to the low-side terminal of the sense resistor with a Kelvin connection. Tie to DGND if unused."
      },
      {
        "number": "19",
        "name": "PGND",
        "type": "power_in",
        "description": "Ground of the input power supply."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_out",
        "description": "3.3V internal regulator output for analog and digital circuit supply. Requires a minimum 1µF ceramic capacitor to DGND. Current limit ≈17mA."
      },
      {
        "number": "21",
        "name": "PMAX",
        "type": "input",
        "description": "Maximum loading power setting pin. Connect a resistor from PMAX to DGND to set the total power capability across all four output ports. PMAX setting latched at start-up/reset."
      },
      {
        "number": "22",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input for both VCC regulator and output ports. Recommended operating range 44V to 57V (absolute max 80V). Bypass with at least 0.1µF/100V ceramic between VIN and PGND."
      },
      {
        "number": "23",
        "name": "SENSE4",
        "type": "input",
        "description": "Current-sense pin from the high-side sense resistor terminal for port 4. Recommended 0.25Ω sense resistor with Kelvin connection. Tie to DGND if unused."
      },
      {
        "number": "24",
        "name": "GATE4",
        "type": "output",
        "description": "MOSFET gate driver for port 4. Drives the external pass N-MOSFET for port 4. Float if not used."
      },
      {
        "number": "25",
        "name": "OUT4",
        "type": "input",
        "description": "Output voltage sense pin for port 4. Connect to the output interface return for detection, classification, voltage sensing, and current-limit foldback control. Float if unused."
      },
      {
        "number": "26",
        "name": "SENSE3",
        "type": "input",
        "description": "Current-sense pin from the high-side sense resistor terminal for port 3. Recommended 0.25Ω sense resistor with Kelvin connection. Tie to DGND if unused."
      },
      {
        "number": "27",
        "name": "GATE3",
        "type": "output",
        "description": "MOSFET gate driver for port 3. Drives the external pass N-MOSFET for port 3. Float if not used."
      },
      {
        "number": "28",
        "name": "OUT3",
        "type": "input",
        "description": "Output voltage sense pin for port 3. Connect to the output interface return for detection, classification, voltage sensing, and current-limit foldback control. Float if unused."
      },
      {
        "number": "29",
        "name": "SENSE2",
        "type": "input",
        "description": "Current-sense pin from the high-side sense resistor terminal for port 2. Recommended 0.25Ω sense resistor with Kelvin connection. Tie to DGND if unused."
      },
      {
        "number": "30",
        "name": "GATE2",
        "type": "output",
        "description": "MOSFET gate driver for port 2. Drives the external pass N-MOSFET for port 2. Float if not used."
      },
      {
        "number": "31",
        "name": "OUT2",
        "type": "input",
        "description": "Output voltage sense pin for port 2. Connect to the output interface return for detection, classification, voltage sensing, and current-limit foldback control. Float if unused."
      },
      {
        "number": "32",
        "name": "SENSE1",
        "type": "input",
        "description": "Current-sense pin from the high-side sense resistor terminal for port 1. Recommended 0.25Ω sense resistor with Kelvin connection. Tie to DGND if unused."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838151171665920",
        "pages": 56,
        "sha256": "e746f450cbdd2478",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 32,
        "described": 32,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp3924gu-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp3924gu-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7edc76e969459552299e9a7cbf8b377966badfe738de18bb2a6972c2120a5930",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Monolithic Power Systems",
      "Package": "QFN-32(5x5)",
      "Category": "Power Management (PMIC)",
      "Pins": "32"
    }
  },
  "variants": [
    {
      "mpn": "MP3924GU-Z",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mp3924gu-z"
  ],
  "discovery_pitch": "MP3924GU-Z (Monolithic Power Systems) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp3924gu-z.kicad_sym",
    "mp3924gu-z.kicad_mod",
    "mp3924gu-z.glb",
    "mp3924gu-z.step",
    "mp3924gu-z.lbr",
    "docs/hero.png",
    "docs/mp3924gu-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:19:36.420Z"
}