main
Ray
Publish 0.1.0
d5a3371
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249
{
"slug": "mp3383gf-z",
"version": "0.1.0",
"type": "component",
"description": "Monolithic Power Systems LED Drivers, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"nixie tube driver-led driver",
"mp3383gf-z",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mp3383gf-z.kicad_sym",
"mp3383gf-z.kicad_mod",
"mp3383gf-z.glb",
"mp3383gf-z.step",
"mp3383gf-z.lbr",
"docs/hero.png",
"docs/mp3383gf-z-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mp3383gf-z-hero.glb",
"mp3383gf-z-hero.overlay.json",
"mp3383gf-z-etched.glb"
],
"component": {
"mpn": "MP3383GF-Z",
"manufacturer": "Monolithic Power Systems",
"package": "TSSOP-16-EP",
"pin_count": 17,
"category": "Nixie Tube Driver/LED Driver",
"subcategory": "LED Drivers",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/99febb533b5214b1ca4b61a4afa96576.pdf",
"parts": {
"symbol": "mp3383gf-z.kicad_sym",
"footprint": "mp3383gf-z.kicad_mod",
"model_3d": "mp3383gf-z-hero.glb",
"model_3d_plain": "mp3383gf-z-etched.glb",
"model_3d_step": "mp3383gf-z-etched.step",
"model_3d_step_plain": "mp3383gf-z.step",
"lbr": "mp3383gf-z.lbr"
},
"distributor_links": {
"lcsc": "C6595724",
"digikey": "1589-MP3383GF-ZTR-ND",
"mouser": "946-MP3383GF-Z"
},
"distributor_check": {
"checked_at": "2026-10-23T09:14:37Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "1589-MP3383GF-ZTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "946-MP3383GF-Z",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "LED1",
"type": "input",
"description": "LED string 1 current input; connect to the LED string 1 cathode (80V absolute maximum)."
},
{
"number": "2",
"name": "LED2",
"type": "input",
"description": "LED string 2 current input; connect to the LED string 2 cathode (80V absolute maximum)."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "4",
"name": "LED3",
"type": "input",
"description": "LED string 3 current input; connect to the LED string 3 cathode (80V absolute maximum)."
},
{
"number": "5",
"name": "LED4",
"type": "input",
"description": "LED string 4 current input; connect to the LED string 4 cathode (80V absolute maximum)."
},
{
"number": "6",
"name": "ISET",
"type": "passive",
"description": "LED current setting; connect a resistor from ISET to GND to set the current in each LED string, and do not leave it floating."
},
{
"number": "7",
"name": "OVP",
"type": "input",
"description": "Output over-voltage protection setting; connect a resistor divider from the output to OVP to set the threshold (2V typical OVP threshold)."
},
{
"number": "8",
"name": "OSC",
"type": "passive",
"description": "Switching frequency setting; connect a resistor between OSC and GND to set the step-up converter's fSW."
},
{
"number": "9",
"name": "EN",
"type": "input",
"description": "Enable control input; above 1.2V turns the part on, below 0.4V turns it off, and it must not be floated."
},
{
"number": "10",
"name": "ISENSE",
"type": "input",
"description": "Current-sense input for peak current control mode across the inductor current-sense resistor and cycle-by-cycle current limit; connect to GND on a slave IC and do not float."
},
{
"number": "11",
"name": "GATE",
"type": "output",
"description": "Step-up converter MOSFET driver output that drives the external power N-channel MOSFET."
},
{
"number": "12",
"name": "VCC",
"type": "power_out",
"description": "Internal 12V linear regulator output that powers the MOSFET gate driver and internal control circuitry; bypass to GND with a ceramic capacitor."
},
{
"number": "13",
"name": "VIN",
"type": "power_in",
"description": "Supply input (6V to 33V operating range) that must be bypassed locally."
},
{
"number": "14",
"name": "ADIM",
"type": "input",
"description": "Analog brightness control input where a PWM duty cycle sets LED current amplitude through an internal 10MΩ/100pF RC filter; high level above 1.2V, low level below 0.4V, 20kHz or more recommended."
},
{
"number": "15",
"name": "COMP",
"type": "passive",
"description": "Step-up converter compensation; connect a ceramic capacitor or a resistor with a capacitor from COMP to GND."
},
{
"number": "16",
"name": "PWM",
"type": "input",
"description": "PWM brightness control input chopping the LED current (average = ISET x duty); high level above 1.2V, low level below 0.4V, weakly pulled to GND internally if floating."
},
{
"number": "17",
"name": "EP",
"type": "power_in",
"description": "Exposed pad; connect to GND."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The EP pad is numbered 'EP' in the datasheet, not a numeric pin. I listed it as pin '17' for the sch; The datasheet's pin table has no electrical types. I inferred the types (ISET, OSC and COMP as passi"
],
"pages_sent": 23,
"cost_usd": 0.1708,
"at": "2026-10-23T09:14:13"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/99febb533b5214b1ca4b61a4afa96576.pdf",
"pages": 23,
"sha256": "a6262a4c5ff2bb16",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mp3383gf-z.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mp3383gf-z-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cab6e379d74c116b91d6471fd80d6e2f156f345fba81753feaae2ba016339bb6",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}