main
History Download
Ray Publish 0.1.0 d5a3371

MP3383GF-Z

Monolithic Power Systems · LED Drivers · TSSOP-16-EP

MP3383GF-Z from Monolithic Power Systems, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LED1 input LED string 1 current input; connect to the LED string 1 cathode (80V absolute maximum).
2 LED2 input LED string 2 current input; connect to the LED string 2 cathode (80V absolute maximum).
3 GND power_in Ground.
4 LED3 input LED string 3 current input; connect to the LED string 3 cathode (80V absolute maximum).
5 LED4 input LED string 4 current input; connect to the LED string 4 cathode (80V absolute maximum).
6 ISET passive LED current setting; connect a resistor from ISET to GND to set the current in each LED string, and do not leave it floating.
7 OVP input Output over-voltage protection setting; connect a resistor divider from the output to OVP to set the threshold (2V typical OVP threshold).
8 OSC passive Switching frequency setting; connect a resistor between OSC and GND to set the step-up converter's fSW.
9 EN input Enable control input; above 1.2V turns the part on, below 0.4V turns it off, and it must not be floated.
10 ISENSE input Current-sense input for peak current control mode across the inductor current-sense resistor and cycle-by-cycle current limit; connect to GND on a slave IC and do not float.
11 GATE output Step-up converter MOSFET driver output that drives the external power N-channel MOSFET.
12 VCC power_out Internal 12V linear regulator output that powers the MOSFET gate driver and internal control circuitry; bypass to GND with a ceramic capacitor.
13 VIN power_in Supply input (6V to 33V operating range) that must be bypassed locally.
14 ADIM input Analog brightness control input where a PWM duty cycle sets LED current amplitude through an internal 10MΩ/100pF RC filter; high level above 1.2V, low level below 0.4V, 20kHz or more recommended.
15 COMP passive Step-up converter compensation; connect a ceramic capacitor or a resistor with a capacitor from COMP to GND.
16 PWM input PWM brightness control input chopping the LED current (average = ISET x duty); high level above 1.2V, low level below 0.4V, weakly pulled to GND internally if floating.
17 EP power_in Exposed pad; connect to GND.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSSOP-16-EP
Category Nixie Tube Driver/LED Driver
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating input voltage VIN 6 33 V 6
Quiescent supply current IQ 3 4 mA VIN = 15V, no switching 6
LDO output voltage VCC 10.5 12 13.5 V 13V < VIN, 0 < ICC < 10mA 6
VCC UVLO threshold VCC_UVLO 4.5 5 5.5 V Rising edge 6
Switching frequency fSW 450 500 550 kHz ROSC = 100kΩ 6
OSC pin voltage VOSC 0.75 0.8 0.85 V ROSC = 100kΩ, fSW = 500kHz 6
Cycle-by-cycle ISENSE current limit 160 200 mV Duty = 89% 6
ISET pin voltage VISET 1.17 1.2 1.23 V 6
LEDx average current ILED 87 90 93 mA RISET = 13.33kΩ, analog and PWM dimming duty cycle = 100% 6
LEDx average current (analog dimming) ILED 5 6 7 mA RISET = 12kΩ, PWM dimming duty cycle = 100%, analog dimming duty cycle = 5% 6
OVP threshold VOVP_OV 1.85 2 2.15 V 7
LEDx OV threshold VLEDx_OV 14 18 22 V 7
Shutdown supply current IST 1 μA VEN = 0V, VIN = 15V 6
Current matching 1.8 % RISET = 13.33kΩ, analog and PWM dimming duty cycle = 100%, ILED = 90mA 6
Current matching (analog dimming) 5.5 % RISET = 12kΩ, PWM dimming duty cycle = 100%, analog dimming duty cycle = 5%, ILED = 5mA 6
Thermal protection threshold TST 150 °C Rising edge 7
Thermal protection hysteresis 25 °C 7
Supply voltage (recommended) VIN 6 33 V 5
Max LED current (recommended) 400 mA Not tested in production 5
Operating junction temperature TJ -40 125 °C 5
VIN absolute maximum VIN -0.3 37 V 5
VCC, VGATE absolute maximum VCC, VGATE -0.3 16 V 5
VLED1 to VLED4 absolute maximum VLED1-VLED4 -0.3 80 V 5
All other pins absolute maximum -0.3 6.5 V 5
Continuous power dissipation TSSOP-16EP 2.78 W TA = 25°C 5
Junction temperature TJ 150 °C 5
Storage temperature -60 150 °C 5
ESD HBM -2 2 kV Human body model 5
ESD CDM -750 750 V Charged device model 5
Thermal resistance junction-case TSSOP-16EP θJC 10 °C/W JESD51-7, 4-layer PCB 5

CAD (KiCad official)

  • Symbol: MP3383GF-Z
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: mp3383gf-z-etched.step / mp3383gf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp3383gf-z.step / mp3383gf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (23 pp, sha256 a6262a4c5ff2bb16, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF