3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP3326GR-Z
Monolithic Power Systems · LED Drivers · QFN-24(4x4)
MP3326GR-Z from Monolithic Power Systems, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RFSH/FLT | output | Refresh signal output or active-low open-drain fault flag: when FLTEN = 0 it outputs the FRFSH-set refresh signal, and when FLTEN = 1 it is pulled low on a fault and must be pulled high to an external voltage source. |
| 2 | EN | input | Enable input: pull EN low to disable the IC and pull EN high to enable it. |
| 3 | SCL | input | I2C interface clock input. |
| 4 | SDA | bidirectional | I2C interface data line (described in the datasheet as the I2C data input). |
| 5 | ADDR | passive | I2C address setting: a resistor from ADDR to GND configures the 4 LSBs of the I2C address, giving 10 configurable addresses. |
| 6 | ISET | passive | LED current setting: a current-setting resistor from this pin to ground sets the current in each LED string. |
| 7 | LED1 | input | LED channel 1 current input; connect the channel 1 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 8 | LED2 | input | LED channel 2 current input; connect the channel 2 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 9 | LED3 | input | LED channel 3 current input; connect the channel 3 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 10 | LED4 | input | LED channel 4 current input; connect the channel 4 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 11 | LED5 | input | LED channel 5 current input; connect the channel 5 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 12 | LED6 | input | LED channel 6 current input; connect the channel 6 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 13 | LED7 | input | LED channel 7 current input; connect the channel 7 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 14 | GND | power_in | Ground. |
| 15 | LED8 | input | LED channel 8 current input; connect the channel 8 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 16 | LED9 | input | LED channel 9 current input; connect the channel 9 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 17 | LED10 | input | LED channel 10 current input; connect the channel 10 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 18 | LED11 | input | LED channel 11 current input; connect the channel 11 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 19 | LED12 | input | LED channel 12 current input; connect the channel 12 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 20 | LED13 | input | LED channel 13 current input; connect the channel 13 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 21 | LED14 | input | LED channel 14 current input; connect the channel 14 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 22 | LED15 | input | LED channel 15 current input; connect the channel 15 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 23 | LED16 | input | LED channel 16 current input; connect the channel 16 LED cathode to this pin (maximum current 50mA per channel at VIN ≥ 4.5V, VLEDx rated -0.5V to +18V). |
| 24 | VIN | power_in | Power supply input for the IC, rated 4V to 16V, which must be locally bypassed. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-24(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) absolute maximum | VIN | -0.3 | 18 | V | 5 | ||
| LED channel pin voltage (VLED1 to VLED16) | VLED1 to VLED16 | -0.5 | 18 | V | 5 | ||
| All other pins voltage | -0.3 | 5 | V | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Lead temperature | 260 | °C | 5 | ||||
| Storage temperature | -65 | 150 | °C | 5 | |||
| Continuous power dissipation | 2.97 | W | TA = 25°C, QFN-24 (4mmx4mm) | 5 | |||
| ESD human body model (HBM) | -2 | 1.25 | kV | Human body model (HBM) | 5 | ||
| ESD charged device model (CDM) | -2 | 2 | kV | Charged device model (CDM) | 5 | ||
| Supply voltage (VIN) recommended operating | VIN | 4 | 16 | V | 5 | ||
| Operating junction temperature (TJ) recommended operating | TJ | -40 | 150 | °C | 5 | ||
| Input voltage range | VIN | 4 | 16 | V | 6 | ||
| Input UVLO threshold, rising edge | VIN_UVLO | 3.45 | 3.7 | 3.95 | V | Rising edge | 6 |
| Input UVLO threshold, falling edge | VIN_UVLO | 3.15 | 3.5 | 3.85 | V | Falling edge | 6 |
| RFSH/FLT output frequency | fRFSH | 285 | 300 | 315 | Hz | FRFSH9:0 = 0x1A9, FPWM2:0 = 01 | 6 |
| LED current accuracy (tolerance at RISET = 20kΩ, ICHX bits[5:0] = 0x3F) | ILED | -2 | 2 | % | RISET = 20kΩ, ICHX, bits[5:0] = 0x3F | 6 | |
| ISET voltage | VISET | 1.174 | 1.2 | 1.226 | V | 6 | |
| PWM frequency | fPWM | 230 | 245 | 260 | Hz | 6 | |
| LED string short protection threshold | VSLP | 2.75 | 3 | 3.25 | V | STH, bits[1:0] = 01 | 6 |
| Thermal resistance junction-to-case (QFN-24) | θJC | 9 | °C/W | Measured on JESD51-7, 4-layer PCB | 5 |
CAD (KiCad official)
- Symbol:
MP3326GR-Z - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
mp3326gr-z-etched.step/mp3326gr-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp3326gr-z.step/mp3326gr-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (36 pp, sha256
397b2c0c3bcc486a, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).