main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp3324gre-z: viewers · Ray
mp3324gre-z-etched.glb Publish 0.1.0 · Ray
mp3324gre-z-etched.step mp3324gre-z: factory component page (tier=lcsc) · Ray
mp3324gre-z-hero.glb mp3324gre-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp3324gre-z-hero.overlay.json Publish 0.1.0 · Ray
mp3324gre-z.glb Publish 0.1.0 · Ray
mp3324gre-z.kicad_mod Publish 0.1.0 · Ray
mp3324gre-z.kicad_sym Publish 0.1.0 · Ray
mp3324gre-z.lbr Publish 0.1.0 · Ray
mp3324gre-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MP3324GRE-Z

Monolithic Power Systems · LED Drivers · QFN-24(4x4)

MP3324GRE-Z from Monolithic Power Systems, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RFSH/FLT bidirectional Refresh signal output or fault flag; active-low open drain that outputs the FRFSH[9:0] synchronized signal when FLTEN=0 and is pulled low on a fault when FLTEN=1, requiring an external pull-up.
2 EN input Enable control; pull high to turn the LED driver on and low to turn it off.
3 SCL input I2C interface clock input.
4 SDA bidirectional I2C interface data pin.
5 ADDR input I2C address setting; a resistor between ADDR and GND sets the 4 LSB of the I2C address, with 10 configurable addresses.
6 ISET passive LED current setting; connect a current-setting resistor between ISET and GND to configure the current in each LED string.
7 LED1 passive LED channel 1 current input; connect the channel 1 cathode to this pin, and both LED1 pins (7, 8) to the cathode.
8 LED1 passive LED channel 1 current input; connect the channel 1 cathode to this pin, and both LED1 pins (7, 8) to the cathode.
9 LED2 passive LED channel 2 current input; connect the channel 2 cathode to this pin, and both LED2 pins (9, 10) to the cathode.
10 LED2 passive LED channel 2 current input; connect the channel 2 cathode to this pin, and both LED2 pins (9, 10) to the cathode.
11 LED3 passive LED channel 3 current input; connect the channel 3 cathode to this pin, and both LED3 pins (11, 12) to the cathode.
12 LED3 passive LED channel 3 current input; connect the channel 3 cathode to this pin, and both LED3 pins (11, 12) to the cathode.
13 LED4 passive LED channel 4 current input; connect the channel 4 cathode to this pin, and both LED4 pins (13, 15) to the cathode.
14 GND power_in Ground.
15 LED4 passive LED channel 4 current input; connect the channel 4 cathode to this pin, and both LED4 pins (13, 15) to the cathode.
16 LED5 passive LED channel 5 current input; connect the channel 5 cathode to this pin, and both LED5 pins (16, 17) to the cathode.
17 LED5 passive LED channel 5 current input; connect the channel 5 cathode to this pin, and both LED5 pins (16, 17) to the cathode.
18 LED6 passive LED channel 6 current input; connect the channel 6 cathode to this pin, and both LED6 pins (18, 19) to the cathode.
19 LED6 passive LED channel 6 current input; connect the channel 6 cathode to this pin, and both LED6 pins (18, 19) to the cathode.
20 LED7 passive LED channel 7 current input; connect the channel 7 cathode to this pin, and both LED7 pins (20, 21) to the cathode.
21 LED7 passive LED channel 7 current input; connect the channel 7 cathode to this pin, and both LED7 pins (20, 21) to the cathode.
22 LED8 passive LED channel 8 current input; connect the channel 8 cathode to this pin, and both LED8 pins (22, 23) to the cathode.
23 LED8 passive LED channel 8 current input; connect the channel 8 cathode to this pin, and both LED8 pins (22, 23) to the cathode.
24 VIN power_in Power supply input for the IC, operating from 4V to 16V (absolute max 18V); connect a capacitor between VIN and GND.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-24(4x4)
Category Nixie Tube Driver/LED Driver
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 4 16 V 6
Quiescent current IQ 4 mA 6
Shutdown current ISD 2 μA VEN = 0V, VIN = 16V 6
VIN UVLO rising threshold VIN_UVLO_RISING 3.45 3.7 3.95 V Rising edge 6
VIN UVLO falling threshold VIN_UVLO_FALLING 3.15 3.5 3.85 V Falling edge 6
EN rising threshold VEN_RISING 2.1 V VEN rising 6
EN falling threshold VEN_FALLING 0.8 V VEN falling 6
EN pull-down resistance REN 1 MΩ 6
Refresh signal frequency fREFRESH 285 300 315 Hz FRFSH[9:0] = 0x1A9, FPWM[2:0] = 01 6
RFSH/FLT pull-down resistance RRFSH/FLT 100 Ω FLTEN = 1, a fault has occurred 6
ISET voltage VISET 1.174 1.2 1.226 V TA = 25°C 6
LED current ILED -2 50 2 mA RISET = 20kΩ, ICHx[5:0] = 0x3F, TA = 25°C; tolerance in % 6
Current sink headroom VLEDx 150 210 mV ILED = 40mA 6
PWM frequency fPWM 230 245 260 Hz FPWM[1:0] = 01 6
PWM duty step tPWM 0.97 μs 12-bit resolution, fPWM = 250Hz 6
Phase shift tDELAY 80 μs PS_EN = 1 6
LED current step 0.8 mA ILED = 50mA, analog dimming step 6
LED current slew rate during PWM dimming 5 μs SLEW[1:0] = 01, rising edge 6
LED current slew rate during PWM dimming 20 μs SLEW[1:0] = 11, rising edge 6
LED string SLP threshold VSLP 2.75 3 3.25 V STH[1:0] = 01 6
LED string SLP time tSLP 4 ms VLEDx > STH[1:0] 6
LED string SLP hiccup time tSLP_HICCUP 1 ms 6
LED string SLP hiccup detection time tSLP_DET 32 μs 6
LED string OLP threshold VOLP 100 160 mV 6
LED string OLP time tOLP 4 ms VLEDx < 100mV 6
LED string OLP hiccup time tOLP_HICCUP 1 ms 6
LED string OLP hiccup detection time tOLP_DET 32 μs 6
Thermal shutdown threshold TSD 170 °C Guaranteed by characterization 7
Thermal shutdown hysteresis TSD_HYS 20 °C Guaranteed by characterization 7
Input logic low voltage VIN_LOW 0 0.4 V I2C 7
Input logic high voltage VIN_HIGH 1.3 V I2C 7
Output logic low voltage VOUT_LOW 0.4 V ILOAD = 3mA 7
SCL clock frequency fSCL 10 1000 kHz 7
Bus free time tBUS_FREE 0.5 μs Between stop and start conditions 7
Holding time after start/repeated start condition tHOLD_START 0.26 μs The first clock is generated after this period 7
Repeated start condition set-up time tSU_START 0.26 μs 7
Stop condition set-up time tSU_STOP 0.26 μs 7
Data hold time tHOLD_DATA 0 ns 7
Data set-up time tSU_DATA 50 ns 7
Clock low timeout tTIMEOUT 25 35 ms 7
Clock low time tLOW 0.5 μs 7
Clock high time tHIGH 0.26 μs 7
Clock/data fall time tFALL 120 ns 7
Clock/data rise time tRISE 120 ns 7
VIN absolute maximum VIN -0.3 18 V 5
LED1 to LED8 voltage VLED1 to VLED8 -0.5 18 V 5
All other pins -0.3 5 V 5
Junction temperature TJ 150 °C 5
Lead temperature 260 °C 5
Storage temperature -65 150 °C 5
Continuous power dissipation 2.97 W TA = 25°C, QFN-24 (4mmx4mm) 5
ESD HBM -2 2 kV Human body model 5
ESD CDM -750 750 V Charged device model 5
Operating junction temperature TJ -40 125 °C 5
Thermal resistance junction-case θJC 9 °C/W QFN-24 (4mmx4mm), JESD51-7 4-layer PCB 5

CAD (KiCad official)

  • Symbol: MP3324GRE-Z
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: mp3324gre-z-etched.step / mp3324gre-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp3324gre-z.step / mp3324gre-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (29 pp, sha256 a5ddb2b1edda4788, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF