main
Ray Publish 0.1.0 2b6e3da
{
  "slug": "mp3309gqg-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems LED Drivers, QFN-10(1.4x1.8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "mp3309gqg-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp3309gqg-z.kicad_sym",
    "mp3309gqg-z.kicad_mod",
    "mp3309gqg-z.glb",
    "mp3309gqg-z.step",
    "mp3309gqg-z.lbr",
    "docs/hero.png",
    "docs/mp3309gqg-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp3309gqg-z-hero.glb",
    "mp3309gqg-z-hero.overlay.json",
    "mp3309gqg-z-etched.glb"
  ],
  "component": {
    "mpn": "MP3309GQG-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "QFN-10(1.4x1.8)",
    "pin_count": 10,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f84a8c34a1aa35b5a5a577f2872a954c.pdf",
    "parts": {
      "symbol": "mp3309gqg-z.kicad_sym",
      "footprint": "mp3309gqg-z.kicad_mod",
      "model_3d": "mp3309gqg-z-hero.glb",
      "model_3d_plain": "mp3309gqg-z-etched.glb",
      "model_3d_step": "mp3309gqg-z-etched.step",
      "model_3d_step_plain": "mp3309gqg-z.step",
      "lbr": "mp3309gqg-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C6595706",
      "digikey": "MP3309GQG-Z-ND",
      "mouser": "946-MP3309GQG-Z"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T06:35:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MP3309GQG-Z-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "946-MP3309GQG-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PWMH",
        "type": "input",
        "description": "Dimming input for PWM-input analog dimming (>20kHz PWM signal recommended); pull both PWMH pins high together when analog dimming is not used."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin (2.7V to 5.5V) that powers internal power and logic circuits and must be locally bypassed."
      },
      {
        "number": "3",
        "name": "EN/PWML",
        "type": "input",
        "description": "PWM brightness control/enable input, 200Hz to 2kHz recommended for PWM dimming, where a low-level signal longer than 20ms shuts down the IC."
      },
      {
        "number": "4",
        "name": "FREQ",
        "type": "passive",
        "description": "Switching frequency set pin; connect a resistor between this pin and GND to program the converter switching frequency and do not leave it floating."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "LED current feedback pin that regulates the voltage across the current sense resistor between FB and GND to 200mV; do not leave floating."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "passive",
        "description": "Power switch node, drain of the internal low-side MOSFET; connect the power inductor between SW and VIN, and a Schottky diode to VOUT for non-synchronous mode."
      },
      {
        "number": "8",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output voltage pin internally connected to the source of the synchronous MOSFET (OVP threshold typically 35.5V); for non-synchronous mode connect a Schottky diode between SW and this pin."
      },
      {
        "number": "9",
        "name": "BST",
        "type": "passive",
        "description": "Bootstrap pin; connect a capacitor between SW and BST to provide the synchronous MOSFET gate driver."
      },
      {
        "number": "10",
        "name": "PWMH",
        "type": "input",
        "description": "Dimming input for PWM-input analog dimming (>20kHz PWM signal recommended); pull both PWMH pins high together when analog dimming is not used."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for SW, BST, FREQ and VOUT are not stated by the datasheet; they were inferred from the pi"
        ],
        "pages_sent": 12,
        "cost_usd": 0.1011,
        "at": "2026-10-27T06:35:03"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f84a8c34a1aa35b5a5a577f2872a954c.pdf",
        "pages": 12,
        "sha256": "e5b06a74e0f88963",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp3309gqg-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.4,
          1.8,
          0.57
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18e8e52c79f660f6db601c893a3ba62a564efea84c0c6dd95908b6b785ca7f2d",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp3309gqg-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.4,
          1.8,
          0.57
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e440682624894527de1aab4b1b956b9c456c4a215ced16cf53320bd7778c2107",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}