main
Ray
Publish 0.1.0
de20445
MP3216DJ-LF-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-6
MP3216DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Power switch output that is the drain of the internal MOSFET switch; connect the power inductor and output rectifier to SW (rated -0.5V to +40V, VIN to 36V recommended). |
| 2 | GND | power_in | Ground. |
| 3 | FB | input | Feedback input with 1.24V reference voltage; connect a resistor divider from the output to this pin. |
| 4 | EN | input | ON/OFF control input; a voltage greater than 2V turns the part on and less than 0.8V turns it off, and when not used tie EN to the input source for automatic startup. |
| 5 | IN | power_in | Input supply pin (2.5V to 6V), the drain of the internal disconnecting N-channel MOSFET, which must be locally bypassed. |
| 6 | L | passive | Inductor output pin, the source/body of the internal disconnecting N-channel MOSFET; connect the inductor to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.5 | 6 | V | VIN = VEN = 5V, TA = +25C | 4 | |
| Supply Current (Quiescent) | 550 | 650 | µA | VFB = 0.15V | 4 | ||
| Switching Frequency | fSW | 1 | 1.3 | 1.5 | MHz | 4 | |
| IN Under Voltage Lockout | UVLO | 2.25 | 2.45 | V | VIN Rising | 4 | |
| FB Voltage | VFB | 1.2 | 1.24 | 1.28 | V | 4 | |
| Supply Current (Shutdown) | 10 | µA | VEN = 0V | 4 | |||
| Maximum Duty Cycle | 92 | % | VFB = 0V | 4 | |||
| Under Voltage Lockout Hysteresis | 92 | mV | 4 | ||||
| Over Voltage Shutdown Threshold | VOV | 42 | V | VOV Rising | 4 | ||
| EN OFF Threshold | VEN | 0.8 | V | VEN Falling | 4 | ||
| EN ON Threshold | VEN | 2 | V | VEN Rising | 4 | ||
| FB Input Bias Current | 70 | nA | VFB = 1.2V | 4 | |||
| SW On-Resistance | RON | 600 | mΩ | 4 | |||
| SW Current Limit | 0.75 | A | Duty Cycle = 60% | 4 | |||
| Thermal Shutdown | 150 | C | 4 | ||||
| Disconnect Switch N-CH On-Resistance | 300 | mΩ | 4 | ||||
| Inrush Current Limit | 0.21 | A | VL<(VIN-0.3V) | 4 | |||
| SW Pin Voltage | -0.5 | 40 | V | -1.5V for 20ns | 3 | ||
| All Other Pins Voltage | -0.3 | 6.5 | V | 3 | |||
| Continuous Power Dissipation | 0.56 | W | TA = +25°C | 3 | |||
| Junction Temperature | TJ | 150 | C | 3 | |||
| Lead Temperature | 260 | C | 3 | ||||
| Storage Temperature | -55 | 150 | C | 3 | |||
| IN Supply Voltage | VIN | 2.5 | 6 | V | 3 | ||
| SW Pin Voltage | 36 | V | VIN to 36V | 3 | |||
| Maximum Junction Temperature | TJ | 125 | C | 3 | |||
| Thermal Resistance Junction-Ambient | θJA | 220 | C/W | TSOT23-6, JESD51-7 4-layer PCB | 3 | ||
| Thermal Resistance Junction-Case | θJC | 110 | C/W | TSOT23-6, JESD51-7 4-layer PCB | 3 |
CAD (KiCad official)
- Symbol:
MP3216DJ-LF-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp3216dj-lf-z-etched.step/mp3216dj-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp3216dj-lf-z.step/mp3216dj-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (12 pp, sha256
9a5a984b4db9f990, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP3216DJ-LF-Z
**Monolithic Power Systems** · DC-DC Converters · TSOT-23-6
MP3216DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Power switch output that is the drain of the internal MOSFET switch; connect the power inductor and output rectifier to SW (rated -0.5V to +40V, VIN to 36V recommended). |
| 2 | GND | power_in | Ground. |
| 3 | FB | input | Feedback input with 1.24V reference voltage; connect a resistor divider from the output to this pin. |
| 4 | EN | input | ON/OFF control input; a voltage greater than 2V turns the part on and less than 0.8V turns it off, and when not used tie EN to the input source for automatic startup. |
| 5 | IN | power_in | Input supply pin (2.5V to 6V), the drain of the internal disconnecting N-channel MOSFET, which must be locally bypassed. |
| 6 | L | passive | Inductor output pin, the source/body of the internal disconnecting N-channel MOSFET; connect the inductor to this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.5 | | 6 | V | VIN = VEN = 5V, TA = +25C | 4 |
| Supply Current (Quiescent) | | | 550 | 650 | µA | VFB = 0.15V | 4 |
| Switching Frequency | fSW | 1 | 1.3 | 1.5 | MHz | | 4 |
| IN Under Voltage Lockout | UVLO | 2.25 | | 2.45 | V | VIN Rising | 4 |
| FB Voltage | VFB | 1.2 | 1.24 | 1.28 | V | | 4 |
| Supply Current (Shutdown) | | | | 10 | µA | VEN = 0V | 4 |
| Maximum Duty Cycle | | | 92 | | % | VFB = 0V | 4 |
| Under Voltage Lockout Hysteresis | | | 92 | | mV | | 4 |
| Over Voltage Shutdown Threshold | VOV | | 42 | | V | VOV Rising | 4 |
| EN OFF Threshold | VEN | | 0.8 | | V | VEN Falling | 4 |
| EN ON Threshold | VEN | | 2 | | V | VEN Rising | 4 |
| FB Input Bias Current | | | 70 | | nA | VFB = 1.2V | 4 |
| SW On-Resistance | RON | | 600 | | mΩ | | 4 |
| SW Current Limit | | | 0.75 | | A | Duty Cycle = 60% | 4 |
| Thermal Shutdown | | | 150 | | C | | 4 |
| Disconnect Switch N-CH On-Resistance | | | 300 | | mΩ | | 4 |
| Inrush Current Limit | | | 0.21 | | A | VL<(VIN-0.3V) | 4 |
| SW Pin Voltage | | -0.5 | | 40 | V | -1.5V for 20ns | 3 |
| All Other Pins Voltage | | -0.3 | | 6.5 | V | | 3 |
| Continuous Power Dissipation | | | | 0.56 | W | TA = +25°C | 3 |
| Junction Temperature | TJ | | | 150 | C | | 3 |
| Lead Temperature | | | | 260 | C | | 3 |
| Storage Temperature | | -55 | | 150 | C | | 3 |
| IN Supply Voltage | VIN | 2.5 | | 6 | V | | 3 |
| SW Pin Voltage | | | | 36 | V | VIN to 36V | 3 |
| Maximum Junction Temperature | TJ | | | 125 | C | | 3 |
| Thermal Resistance Junction-Ambient | θJA | | 220 | | C/W | TSOT23-6, JESD51-7 4-layer PCB | 3 |
| Thermal Resistance Junction-Case | θJC | | 110 | | C/W | TSOT23-6, JESD51-7 4-layer PCB | 3 |
## CAD (KiCad official)
- Symbol: `MP3216DJ-LF-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mp3216dj-lf-z-etched.step` / `mp3216dj-lf-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp3216dj-lf-z.step` / `mp3216dj-lf-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mp3216dj-lf-z-datasheet.pdf) (12 pp, sha256 `9a5a984b4db9f990`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp3216dj-lf-z-datasheet.pdf)