main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp2625bgl-z: viewers · Ray
mp2625bgl-z-etched.glb mp2625bgl-z: factory component page (tier=lcsc) · Ray
mp2625bgl-z-etched.step mp2625bgl-z: factory component page (tier=lcsc) · Ray
mp2625bgl-z-hero.glb mp2625bgl-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp2625bgl-z-hero.overlay.json mp2625bgl-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp2625bgl-z.glb Publish 0.1.0 · Ray
mp2625bgl-z.kicad_mod Publish 0.1.0 · Ray
mp2625bgl-z.kicad_sym Publish 0.1.0 · Ray
mp2625bgl-z.lbr Publish 0.1.0 · Ray
mp2625bgl-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 21 pins · Ray

MP2625BGL-Z

Monolithic Power Systems · Battery Management ICs · QFN-20(3x4)

MP2625BGL-Z from Monolithic Power Systems, in a QFN-20(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST passive Bootstrap pin: a capacitor is connected between SW and BST to form a floating supply that drives the power switch gate above the supply voltage.
2 SW output Switch output of the buck regulator, shared with pin 4.
3 IN power_in Power input of the IC from adapter or USB, with an operating range of 4.0V to 10V.
4 SW output Switch output of the buck regulator, shared with pin 2.
5 PGND power_in Power ground of the IC.
6 EN input Function logic control pin: logic low enables the part and logic high disables it, with input high threshold of 1.5V and low threshold of 0.4V.
7 M0 input Mode select input that, in combination with M1, sets the input current limit mode, with logic high at 1.5V minimum and logic low at 0.4V maximum.
8 M1 input Mode select input that, in combination with M0, sets the input current limit mode, with logic high at 1.5V minimum and logic low at 0.4V maximum.
9 CHGOK output Open-drain output that is pulled low during charging and pulled high through an external resistor to VCC to indicate charge completed.
10 ACOK output Open-drain output that is pulled low to indicate a valid input power supply, otherwise pulled high through an external resistor to VCC to indicate invalid or removed input.
11 AGND power_in Analog ground of the IC.
12 SYSFB input SYS voltage program pin: a resistor divider from the pin to SYS and AGND programs the system output voltage, and leaving it floating disables the function.
13 SYS power_out DC-DC regulator output that powers the system load and charges the battery, with a regulation voltage of 3.5V to BATT+0.2V when BATT is float.
14 BATT bidirectional Positive battery terminal, with battery leakage current of 30µA maximum at VBATT=4.2V with SYS floating.
15 ISET passive Charge current program pin: a resistor from this pin to AGND programs the constant-current charge current, and floating the pin disables charging, with a reference voltage of 1.15V typical.
16 NTC input Thermistor input: a resistor from this pin to VCC and the thermistor from this pin to ground, with the thermistor usually inside the battery pack.
17 ILIM input Input current limit program pin: a resistor from this pin to AGND programs the input current limit with adapter input, with a reference voltage of 1.14V typical.
18 TMR passive Timer period setting pin, which connects to AGND to disable the internal timer.
19 VLIM input Input voltage clamp program pin, with clamp threshold of 1.49V to 1.55V on VLIM.
20 VCC power_out Supply voltage of the IC, with VCC output voltage of 4.3V to 4.6V for 0mA to 25mA load at VIN=6V and output current limit of 40mA.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-20(3x4)
Category Power Supply Chip
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
IN, SW voltage -0.3 20 V 5
BST voltage -0.3 26 V 5
BATT, SYS voltage -0.3 6 V 5
All other pins voltage -0.3 6 V 5
Supply voltage VIN VIN 4 10 V 5
Operating junction temperature TJ -40 125 °C 5
Storage temperature TSTORE -65 150 °C 5
Junction temperature TJ 150 °C 5
Lead temperature 260 °C 5
Continuous power dissipation PD 2.6 W TA = +25°C, QFN20 3mmx4mm 5
Thermal resistance junction-to-ambient θJA 48 °C/W QFN-20 (3mmx4mm), JESD51-7 4-layer PCB 5
Thermal resistance junction-to-case θJC 11 °C/W QFN-20 (3mmx4mm) 5
IN operating range VIN 4 10 V 6
IN under voltage lockout threshold rising 3.65 3.8 3.95 V Rising 6
IN under voltage lockout threshold falling 3.35 3.5 3.65 V Falling 6
IN vs. BATT threshold rising 240 280 320 mV Rising 6
IN vs. BATT threshold falling 40 70 120 mV Falling 6
BST voltage threshold rising VBST-VSW 2.7 2.9 3.1 V Rising 6
BST voltage threshold falling VBST-VSW 2.55 2.75 2.95 V Falling 6
Switching frequency 1.4 1.6 1.8 MHz 6
Input current limit USB2.0 mode IIN 400 450 500 mA USB2.0 Mode 6
Input current limit USB3.0 mode IIN 750 825 900 mA USB3.0 Mode 6
Input current limit default mode IIN 1840 2000 2160 mA Default Mode 6
Input current limit programmable mode IIN 1840 2000 2160 mA Programmable Mode, RILIM=23k 6
Input current limit reference voltage VILIM 1.1 1.14 1.18 V 6
High-side NMOS on resistance RH_DS(ON) 120 130 mΩ Include the BLOCK FET 6
Low-side NMOS on resistance RL_DS(ON) 80 100 mΩ 6
High-side NMOS peak current limit 3 4 5 A 6
Input voltage clamp threshold VVLIM 1.49 1.52 1.55 V Voltage on VLIM 6
Input quiescent current charger enabled USB2.0 mode IIN 2.4 5 mA Charger Enabled, USB2.0 Mode 6
Input quiescent current charger enabled USB3.0 mode IIN 2.8 5 mA Charger Enabled, USB3.0 Mode 6
Input quiescent current charger enabled programmable mode IIN 3.8 5 mA Charger Enabled, Programmable Mode 6
Input quiescent current charger enabled default mode IIN 3.8 5 mA Charger Enabled, Default Mode 6
Input quiescent current disabled IIN 3 5 uA Disabled, EN=0V 6
SYS to IN reverse current blocking 0.01 0.2 uA SYS=SW=4.5V, VIN=0V, monitor VIN leakage 6
Minimum SYS regulation voltage VSYS 3.45 3.6 3.75 V SYS voltage @ VBATT≤3.4V, SYSFB float 6
SYS regulation voltage BATT float VSYS 3.5 4.5 V 3.4V<VBATT≤4.2V, SYSFB float 6
SYS regulation voltage user programmed by SYSFB VSYS 4.08 4.4 V 6
SYS reference voltage VSYS_REF 1.135 1.152 1.17 V 6
BATT to SYS resistance 0.04 0.05 Ω VIN=0V, ISYS=200mA, VBATT=4.2V 7
BATT to SYS current limit 4 5 6 A VSYS>VBATT-800mV, VBATT=4.2V 7
SYS short current limit 230 mA SYS short 7
Terminal battery voltage VBATT 4.168 4.2 4.232 V VBATT>VRECH, ICHG≤IBF, VSYS<4.2V, SYSFB float 7
Recharge threshold at VBATT SYSFB float VRECH 3.9 4 4.1 V SYSFB Float 7
Recharge threshold at VBATT SYSFB programmed VRECH 3.85 3.95 4.05 V SYSFB programmed 7
Recharge hysteresis 85 mV 7
Trickle charge threshold 2.9 3 3.1 V 7
Trickle charger hysteresis 200 mV 7
Trickle charge current ITRICKLE 10 % ICC 7
Termination charger current IBF 5 10 15 % ICC 7
IBF maximum limit IBF 150 200 mA 7
Constant current mode charge current RISET=1.05k ICC 1.8 2 2.2 A RISET=1.05k 7
Constant current mode charge current RISET=1.53k ICC 1.26 1.4 1.54 A RISET=1.53k 7
Constant current mode charge current RISET=4.6k ICC 0.405 0.45 0.495 A RISET=4.6k 7
ISET reference voltage 1.1 1.15 1.2 V 7
Battery UVLO rising 2.4 2.6 2.8 V Rising 7
Battery UVLO falling 2.2 2.4 2.6 V Falling 7
BATT leakage current IBATT 20 30 µA VBATT=4.2V, SYS float, VIN=PGND 7
ACOK, CHGOK pin output low voltage sinking 5mA 270 350 mV Sinking 5mA 7
ACOK, CHGOK pin leakage current 0.1 0.5 uA Connected to 3.3V 7
Trickle charge timer 30 43 55 Min CTMR=0.1µF, RISET=2.3k 7
CC charge timer 5 6.2 7.4 Hour CTMR=0.1µF, RISET=2.3k 7
NTC low temp rising threshold VTHL 63 65 67 %VCC RNTC=NCP18XH103F, 0°C 8
Hysteresis on low temp threshold 35 mV 8
NTC high temp falling threshold VTHH 32 33.5 35 %VCC RNTC=NCP18XH103F, 50°C 8
Hysteresis on high temp threshold 70 mV 8
VCC UVLO rising 3.15 3.35 3.55 V Rising 8
VCC UVLO falling 2.8 3 3.2 V Falling 8
VCC output voltage 4.3 4.5 4.6 V 0mA<IVCC<25mA, VIN=6V 8
VCC output current limit 40 mA 8
EN input low voltage 0.4 V 8
EN input high voltage 1.5 V 8
EN input current 4 8 μA EN=4V 8
EN input current -0.5 -0.1 μA EN=0V 8
M0, M1 logic high 1.5 V 8
M0, M1 logic low 0.4 V 8
Thermal limit temperature 120 °C 8
Thermal shutdown 150 °C 8

CAD (KiCad official)

  • Symbol: MP2625BGL-Z
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm
  • 3D model: QFN-20(3x4) (KiCad packages3D, STEP)
  • 3D model files: mp2625bgl-z-etched.step / mp2625bgl-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp2625bgl-z.step / mp2625bgl-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (31 pp, sha256 efb0c49859512c24, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF