MP24895GJ-Z

{
  "slug": "mp24895gj-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems LED Drivers, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "mp24895gj-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp24895gj-z.kicad_sym",
    "mp24895gj-z.kicad_mod",
    "mp24895gj-z.glb",
    "mp24895gj-z.step",
    "mp24895gj-z.lbr",
    "docs/hero.png",
    "docs/mp24895gj-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp24895gj-z-hero.glb",
    "mp24895gj-z-hero.overlay.json",
    "mp24895gj-z-etched.glb"
  ],
  "component": {
    "mpn": "MP24895GJ-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "TSOT-23-5",
    "pin_count": 5,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602538736790093824",
    "parts": {
      "symbol": "mp24895gj-z.kicad_sym",
      "footprint": "mp24895gj-z.kicad_mod",
      "model_3d": "mp24895gj-z-hero.glb",
      "model_3d_plain": "mp24895gj-z-etched.glb",
      "model_3d_step": "mp24895gj-z-etched.step",
      "model_3d_step_plain": "mp24895gj-z.step",
      "lbr": "mp24895gj-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C6227927",
      "digikey": "MP24895GJ-Z-ND",
      "mouser": "946-MP24895GJ-Z"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T01:00:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MP24895GJ-Z-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "946-MP24895GJ-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Drain of the internal MOSFET; connect the inductor common terminal and the Schottky anode to this pin, with VIN and VSW rated -0.3V to +40V absolute maximum."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "3",
        "name": "EN/DIM",
        "type": "input",
        "description": "Enable/dimming command input: apply a PWM square wave or a 0.3V-to-2.5V DC voltage for 25% to 200% LED current, pull below 0.2V to turn off the output current, and leave open for normal operation (VEN/DIM = 1.28V)."
      },
      {
        "number": "4",
        "name": "RS",
        "type": "input",
        "description": "LED current-sense input; connect a current-sense resistor between the IN and RS pins to program the LED average current, with RSET = 100mV/ILED."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin, rated 6V to 36V; connect an appropriate decoupling capacitor from IN to GND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives no KiCad electrical class for SW; 'output' was chosen because it is the switch n; Pin 6 (N/C) appears only in the QFN-6 column of the pin table and does not exist on the TSOT23-5 pac"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0468,
        "at": "2026-10-19T01:00:23"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602538736790093824",
        "pages": 13,
        "sha256": "6968f3d3e115f61b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp24895gj-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5120f0cee43ef7743cc08408d2c12f234fcac7355386e330a3a16f336e23da8d",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp24895gj-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3033deb09bbdd89f0169a5bd5156916b27512389e31ad4870a81495e3e3c4bf1",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}