MP24833-AGN-Z

{
  "slug": "mp24833-agn-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems LED Drivers, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "mp24833-agn-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp24833-agn-z.kicad_sym",
    "mp24833-agn-z.kicad_mod",
    "mp24833-agn-z.glb",
    "mp24833-agn-z.step",
    "mp24833-agn-z.lbr",
    "docs/hero.png",
    "docs/mp24833-agn-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp24833-agn-z-hero.glb",
    "mp24833-agn-z-hero.overlay.json",
    "mp24833-agn-z-etched.glb"
  ],
  "component": {
    "mpn": "MP24833-AGN-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922719212871680",
    "parts": {
      "symbol": "mp24833-agn-z.kicad_sym",
      "footprint": "mp24833-agn-z.kicad_mod",
      "model_3d": "mp24833-agn-z-hero.glb",
      "model_3d_plain": "mp24833-agn-z-etched.glb",
      "model_3d_step": "mp24833-agn-z-etched.step",
      "model_3d_step_plain": "mp24833-agn-z.step",
      "lbr": "mp24833-agn-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C3199752"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T22:40:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply input that operates from a 4.5V-to-55V unregulated input (with respect to VSS), and an input capacitor is needed to prevent large voltage spikes at the input."
      },
      {
        "number": "2",
        "name": "VSS",
        "type": "power_in",
        "description": "Power return and voltage reference for the regulated output, to be connected to the lowest potential in the circuit (typically the Schottky rectifier anode); the exposed pad is also connected to VSS."
      },
      {
        "number": "3",
        "name": "OVP",
        "type": "input",
        "description": "Over-voltage protection input programmed by a voltage divider, where the switch turns off at the 2.43V shutdown threshold and normal operation requires programming from 0.2V to 2.43V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "LED current feedback input that senses the current across the sensing resistor connected between FB and VSS, with a regulation voltage of 0.2V."
      },
      {
        "number": "5",
        "name": "EN/DIM",
        "type": "input",
        "description": "On/off and dimming control input referenced to INGND that turns the chip on above 0.67V, supports analog dimming from 0.67V to 1.35V, and PWM dimming at 100Hz-2kHz with an amplitude greater than 1.5V."
      },
      {
        "number": "6",
        "name": "INGND",
        "type": "power_in",
        "description": "Input ground reference that serves as the reference for the EN/DIM signal."
      },
      {
        "number": "7",
        "name": "BST",
        "type": "passive",
        "description": "Bootstrap pin where a ceramic capacitor of 100nF or larger is connected between SW and BST to form a floating supply for the power switch driver."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Switch output that is the source of the internal MOSFET, connected to the power inductor and the cathode of the rectifier diode."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives no separate pad number for the exposed pad; it is described only as connected to; The ordering table lists MP24833-AGN with a tape-and-reel suffix -Z (MP24833-AGN-Z), which is the re; BST type was set to passive because the datasheet describes it only as a bootstrap capacitor connect",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0633,
        "at": "2026-10-17T22:38:53"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922719212871680",
        "pages": 14,
        "sha256": "3bc0d533d89b5928",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp24833-agn-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp24833-agn-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e276f9a2b201ac80e8520f5b496f1383ff231d081f2bf54cc4dbe0a0f06c1a66",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}