component
MP2456GJ-Z
Public Made by Adomby adom
Monolithic Power Systems Global Sourcing Parts, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 20d ago |
| viewers | 20d ago |
| mp2456gj-z-etched.glb | 20d ago |
| mp2456gj-z-etched.step | 20d ago |
| mp2456gj-z-hero.glb | 20d ago |
| mp2456gj-z-hero.overlay.json | 20d ago |
| mp2456gj-z.glb | 20d ago |
| mp2456gj-z.kicad_mod | 20d ago |
| mp2456gj-z.kicad_sym | 20d ago |
| mp2456gj-z.lbr | 20d ago |
| mp2456gj-z.step | 20d ago |
| package.json | 20d ago |
| page.json | 20d ago |
| README.md | 20d ago |
MP2456GJ-Z
Monolithic Power Systems · Global Sourcing Parts · TSOT-23-6
MP2456GJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | passive | Bootstrap pin: connect a capacitor between the SW and BST pins to form a floating supply that drives the power switch gate above the supply voltage (BST capacitor is 0.1µF-1µF per the application notes). |
| 2 | GND | power_in | Ground and voltage reference for the regulated output voltage; it requires special layout so that it is isolated from the D1-to-C1 ground path to prevent switching current spikes from inducing noise. |
| 3 | FB | input | Feedback input that sets the output voltage through an external resistor divider from the output to GND; the frequency foldback comparator lowers the oscillator frequency when FB is below 250mV. |
| 4 | EN | input | On/off input: pull EN above 1.35V to turn the device on, and keep the EN sink current at or below 100µA (EN may be tied to VIN through a resistor for automatic enable). |
| 5 | IN | power_in | Supply voltage input for the unregulated 4.5V-to-50V input range; input capacitor C1 is required to prevent large voltage spikes at the input. |
| 6 | SW | output | Switch output connecting the internal power MOSFET to the inductor and external Schottky diode D1; the datasheet gives no further electrical limits for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Global Sourcing Parts |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VIN (absolute maximum) | VIN | -0.3 | 52 | V | 2 | ||
| Switch Voltage VSW (absolute maximum) | VSW | -0.3 | V | Upper limit printed as VIN+0.3V | 2 | ||
| All Other Pins Voltage (absolute maximum) | -0.3 | 6 | V | 2 | |||
| EN Sink Current (absolute maximum) | 100 | μA | 2 | ||||
| Continuous Power Dissipation TSOT23-6 (absolute maximum) | 0.568 | W | TA = +25°C | 2 | |||
| Junction Temperature (absolute maximum) | 150 | °C | 2 | ||||
| Lead Temperature (absolute maximum) | 260 | °C | 2 | ||||
| Storage Temperature (absolute maximum) | -65 | 150 | °C | 2 | |||
| Supply Voltage VIN (recommended operating) | VIN | 4.5 | 50 | V | 2 | ||
| Output Voltage VOUT (recommended operating) | VOUT | 0.81 | V | Upper limit printed as 0.9×VIN | 2 | ||
| Operating Junction Temperature (recommended operating) | -40 | 125 | °C | 2 | |||
| Feedback Voltage | VFB | 0.792 | 0.812 | 0.832 | V | 4.5V ≤ VIN ≤ 50V | 3 |
| Feedback Current | IFB | 0.1 | μA | VFB = 0.85V | 3 | ||
| Switch Leakage Current | ISW_LKG | 1 | μA | VEN = 0V, VSW = 0V | 3 | ||
| Current Limit | ILIM | 1 | 1.25 | 1.5 | A | 3 | |
| Oscillator Frequency | fSW | 0.95 | 1.2 | 1.45 | MHz | VFB = 0.6V | 3 |
| Maximum Duty Cycle | DMAX | 89 | 91 | % | VFB = 0.6V | 3 | |
| Minimum ON-Time | τON | 50 | ns | 3 | |||
| Under-Voltage Lockout Threshold, Rising | VUVLO_R | 2.9 | 3.3 | 3.7 | V | 3 | |
| Under-Voltage Lockout Threshold, Falling | VUVLO_F | 2.65 | 3.05 | 3.45 | V | 3 | |
| EN Threshold, Rising | VEN_R | 1.2 | 1.35 | 1.5 | V | 3 | |
| EN Threshold, Falling | VEN_F | 1 | 1.17 | 1.35 | V | 3 | |
| EN Input Current | IEN | 3.1 | μA | VEN = 2V | 3 | ||
| EN Input Current | IEN | 0.1 | μA | VEN = 0V | 3 | ||
| Supply Current (Shutdown) | IS | 0.1 | 1 | μA | VEN = 0V | 3 | |
| Supply Current (Quiescent) | IQ | 0.73 | 0.85 | mA | VEN = 2V, VFB = 1V | 3 | |
| Under-Voltage Lockout Threshold Hysteresis | VUVLO_HYS | 250 | mV | 3 | |||
| EN Threshold Hysteresis | VEN_HYS | 180 | mV | 3 | |||
| Foldback Frequency | fSW_F | 200 | kHz | VFB = 0V | 3 | ||
| Switch-On Resistance | RDS(ON) | 1 | Ω | 3 | |||
| Thermal Shutdown | TSD | 165 | °C | Derived from bench characterization, not tested in production | 3 | ||
| Thermal Shutdown Hysteresis | TSD_HYS | 20 | °C | Derived from bench characterization, not tested in production | 3 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 220 | °C/W | Measured on JESD51-7, 4-layer PCB | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 110 | °C/W | Measured on JESD51-7, 4-layer PCB | 2 |
CAD (KiCad official)
- Symbol:
MP2456GJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp2456gj-z-etched.step/mp2456gj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2456gj-z.step/mp2456gj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (14 pp, sha256
f056beaa5bb1cb56, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).