component
MP2359DJ-LF-Z-MS
Public Made by Adomby adom
MSKSEMI DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP2359DJ-LF-Z-MS
MSKSEMI · DC-DC Converters · SOT-23-6
MP2359DJ-LF-Z-MS from MSKSEMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | passive | Bootstrap pin: a capacitor connected between SW and BS is required to form a floating supply across the high-side switch driver. |
| 2 | GND | power_in | Ground pin, to be connected to a large copper area for thermal performance per the PCB layout guidance. |
| 3 | FB | input | Adjustable-version feedback input; connect FB to the center point of the external resistor divider (regulated feedback voltage 0.791 V to 0.823 V). |
| 4 | EN | input | Drive to a logic-high to enable the IC; drive to a logic-low to disable the IC and enter micro-power shutdown mode. |
| 5 | IN | power_in | Power supply pin; input voltage range is 4 V to 30 V per the electrical characteristics. |
| 6 | SW | output | Switching pin, the switch node driving the inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | 4 | 30 | V | 4 | |||
| Regulated Feedback Voltage | 0.791 | 0.807 | 0.823 | V | TA = 25°C, 4V≤VIN ≤18V | 4 | |
| Oscillation Frequency | 1.2 | 1.4 | 1.6 | MHz | 4 | ||
| Maximum Duty Cycle | 90 | 95 | % | VFB=0.807V | 4 | ||
| Supply Current in Operation | 0.4 | 0.6 | mA | VEN=3.0V, VFB=1.1V | 4 | ||
| Supply Current in Shutdown | 4 | μA | VEN =0 or EN = GND | 4 | |||
| High-Side Switch Leakage Current | 1 | uA | VEN=0V, VSW=12V | 4 | |||
| Minimum On-Time | 60 | nS | 4 | ||||
| Minimum Off-Time | 140 | nS | 4 | ||||
| Soft Start | 1.2 | mS | 4 | ||||
| Operating Temperature Range | -40 | 85 | °C | 4 | |||
| VIN, EN, Voltage | -0.3 | 36 | V | 4 | |||
| VFB Voltages | VFB | -0.3 | 6 | V | 4 | ||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Junction Temperature | 125 | °C | 4 | ||||
| ESD (Machine Made) MM | 200 | V | Machine Made (MM) | 4 | |||
| ESD (Human Body Made) HMB | 2 | KV | Human Body Made (HMB) | 4 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10s | 4 | |||
| VSW Voltage | VSW | -0.3 | V | 4 | |||
| High-Side Switch On-Resistance | 200 | mΩ | 4 | ||||
| Low-Side Switch On-Resistance | 150 | mΩ | 4 | ||||
| Upper Switch Current Limit | 1.5 | A | Minimum Duty Cycle | 4 | |||
| Thermal Shutdown | 160 | ℃ | 4 | ||||
| Thermal Hysteresis | 20 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
MP2359DJ-LF-Z-MS - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp2359dj-lf-z-ms-etched.step/mp2359dj-lf-z-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2359dj-lf-z-ms.step/mp2359dj-lf-z-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (12 pp, sha256
7bf2ae55d3712b03, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).