main
Ray
Publish 0.1.0
1053e8a
MP2345GJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-6
MP2345GJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply voltage input that operates from a +7.5V to +26V input rail and must be decoupled by C1 using wide PCB traces. |
| 2 | SW | output | Switch output node that should be connected using wide PCB traces. |
| 3 | GND | power_in | System ground and reference ground of the regulated output voltage, which requires copper traces and vias for connection. |
| 4 | BST | power_out | Bootstrap pin where a capacitor connects between SW and BST to form a floating supply for the high-side switch driver. |
| 5 | VCC | power_out | Internal LDO output that requires decoupling with a 0.1μF to 0.22μF capacitor and can be biased by an external 5V output through a diode. |
| 6 | FB | input | Feedback input where an external resistor divider from the output to GND sets the output voltage, and the frequency foldback comparator lowers the oscillator frequency when FB is below 396mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN supply voltage absolute maximum | VIN | -0.3 | 28 | V | 3 | ||
| VSW switch node voltage | VSW | -0.6 | 28 | V | 3 | ||
| VSW transient voltage | VSW | -5 | 30 | V | transient < 10ns | 3 | |
| All other pins voltage | -0.3 | 6 | V | 3 | |||
| ESD HBM | -2000 | 2000 | V | Human-body model (HBM) | 3 | ||
| ESD CDM | -1000 | 1000 | V | Charged-device model (CDM) | 3 | ||
| Continuous power dissipation | PD | 1.25 | W | TA = +25°C | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature | 260 | °C | 3 | ||||
| Storage temperature | TSTORE | -65 | 150 | °C | 3 | ||
| Supply voltage | VIN | 7.5 | 26 | V | 3 | ||
| Output voltage | VOUT | 3.3 | V | max VIN x DMAX | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Current limit | ILIMIT | 3.5 | 4.5 | 5.5 | A | Duty cycle = 40%, TJ = 25°C | 4 |
| Oscillator frequency | fSW | 500 | 600 | 700 | kHz | VFB = 750mV | 4 |
| Feedback voltage | VFB | 775 | 791 | 807 | mV | 4 | |
| VIN under-voltage lockout threshold rising | INUVVth | 5.2 | 6.3 | 7.5 | V | 4 | |
| Soft-start period | TSS | 0.8 | 1.5 | 2.2 | ms | 10% to 90% | 4 |
| Thermal resistance junction-to-case, JESD51-7 4-layer PCB | θJC | 55 | °C/W | JESD51-7 (4-layer PCB) | 3 |
CAD (KiCad official)
- Symbol:
MP2345GJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp2345gj-z-etched.step/mp2345gj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2345gj-z.step/mp2345gj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (17 pp, sha256
fc136086a95ad0a0, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP2345GJ-Z
**Monolithic Power Systems** · DC-DC Converters · TSOT-23-6
MP2345GJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply voltage input that operates from a +7.5V to +26V input rail and must be decoupled by C1 using wide PCB traces. |
| 2 | SW | output | Switch output node that should be connected using wide PCB traces. |
| 3 | GND | power_in | System ground and reference ground of the regulated output voltage, which requires copper traces and vias for connection. |
| 4 | BST | power_out | Bootstrap pin where a capacitor connects between SW and BST to form a floating supply for the high-side switch driver. |
| 5 | VCC | power_out | Internal LDO output that requires decoupling with a 0.1μF to 0.22μF capacitor and can be biased by an external 5V output through a diode. |
| 6 | FB | input | Feedback input where an external resistor divider from the output to GND sets the output voltage, and the frequency foldback comparator lowers the oscillator frequency when FB is below 396mV. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN supply voltage absolute maximum | VIN | -0.3 | | 28 | V | | 3 |
| VSW switch node voltage | VSW | -0.6 | | 28 | V | | 3 |
| VSW transient voltage | VSW | -5 | | 30 | V | transient < 10ns | 3 |
| All other pins voltage | | -0.3 | | 6 | V | | 3 |
| ESD HBM | | -2000 | | 2000 | V | Human-body model (HBM) | 3 |
| ESD CDM | | -1000 | | 1000 | V | Charged-device model (CDM) | 3 |
| Continuous power dissipation | PD | | | 1.25 | W | TA = +25°C | 3 |
| Junction temperature | TJ | | | 150 | °C | | 3 |
| Lead temperature | | | | 260 | °C | | 3 |
| Storage temperature | TSTORE | -65 | | 150 | °C | | 3 |
| Supply voltage | VIN | 7.5 | | 26 | V | | 3 |
| Output voltage | VOUT | 3.3 | | | V | max VIN x DMAX | 3 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 3 |
| Current limit | ILIMIT | 3.5 | 4.5 | 5.5 | A | Duty cycle = 40%, TJ = 25°C | 4 |
| Oscillator frequency | fSW | 500 | 600 | 700 | kHz | VFB = 750mV | 4 |
| Feedback voltage | VFB | 775 | 791 | 807 | mV | | 4 |
| VIN under-voltage lockout threshold rising | INUVVth | 5.2 | 6.3 | 7.5 | V | | 4 |
| Soft-start period | TSS | 0.8 | 1.5 | 2.2 | ms | 10% to 90% | 4 |
| Thermal resistance junction-to-case, JESD51-7 4-layer PCB | θJC | | 55 | | °C/W | JESD51-7 (4-layer PCB) | 3 |
## CAD (KiCad official)
- Symbol: `MP2345GJ-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mp2345gj-z-etched.step` / `mp2345gj-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp2345gj-z.step` / `mp2345gj-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet, copy hosted by LCSC](docs/mp2345gj-z-datasheet.pdf) (17 pp, sha256 `fc136086a95ad0a0`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp2345gj-z-datasheet.pdf)