Generated by kicad-footprint-generator · KiCad file format 20260206
MP2314SGJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MP2314SGJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AAM | input | Advanced asynchronous modulation pin that sets the light-load AAM threshold through a divider from VCC to GND (with a 6.7µA source current), and tying it to VCC or floating it forces CCM operation. |
| 2 | IN | power_in | Supply voltage input for the 4.5V to 24V input rail, which must be decoupled by input capacitor C1 and connected with a wide PCB trace. |
| 3 | SW | output | Switch output node that must be connected with a wide PCB trace and routed away from sensitive analog areas such as FB. |
| 4 | GND | power_in | System ground and reference ground for the regulated output voltage, which requires copper traces and vias during PCB layout. |
| 5 | BST | passive | Bootstrap pin that requires a capacitor and a resistor between SW and BST to form the floating high-side switch driver supply. |
| 6 | EN | input | Enable input that turns the regulator on when driven high, with an internal 1MΩ resistor to GND and a 5.6V Zener clamp. |
| 7 | VCC | power_out | Internal 5.1V LDO bias output that must be decoupled with a 0.1µF to 0.22µF capacitor. |
| 8 | FB | input | Feedback input connected to the output resistor divider tap to set the output voltage, with frequency foldback when FB is below 400mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VFB | 783 | 791 | 800 | mV | 3 | |
| Oscillator frequency | fSW | 400 | 500 | 600 | kHz | VFB = 750mV | 3 |
| EN rising threshold | VEN_RISING | 1.26 | 1.4 | 1.54 | V | 3 | |
| VIN under-voltage lockout threshold rising | INUVVth | 3.85 | 4.05 | 4.25 | V | 3 | |
| VIN under-voltage lockout threshold hysteresis | INUVHYS | 600 | 750 | 900 | mV | 3 | |
| VCC regulator | VCC | 4.85 | 5.1 | 5.35 | V | 3 | |
| Soft-start period | TSS | 0.8 | 1.5 | 2.2 | ms | 10% to 90% | 3 |
| OVP rising threshold | OVH_RISE | 115 | 120 | 125 | %VREF | FB voltage | 3 |
| OVP falling threshold | OVL_FALL | 104 | 109 | 114 | %VREF | FB voltage | 3 |
| Maximum duty cycle | DMAX | 90 | 95 | % | VFB = 750mV | 3 | |
| Current limit | ILIMIT | 3 | 4 | A | Duty cycle = 40% | 3 | |
| Feedback current | IFB | 10 | 50 | nA | VFB = 820mV | 3 | |
| EN input current | IEN | 1 | 2 | 3 | μA | VEN = 2V | 3 |
| EN input current | IEN | 0 | 50 | nA | VEN = 0 | 3 | |
| Supply current (shutdown) | IIN | 1 | μA | VEN = 0V, TJ = 25°C | 3 | ||
| Supply current (quiescent) | Iq | 120 | μA | VEN = 2V, VFB = 0.85V, AAM = 0.4V | 3 | ||
| HS switch on resistance | HSRDS-ON | 140 | mΩ | VBST-SW = 5V | 3 | ||
| LS switch on resistance | LSRDS-ON | 65 | mΩ | VCC = 5V | 3 | ||
| Switch leakage | SWLKG | 1 | μA | VEN = 0V, VSW = 12V, TJ = 25°C | 3 | ||
| Foldback frequency | fFB | 0.5 | fSW | VFB = 200mV | 3 | ||
| Minimum on time | TON_MIN | 60 | ns | 3 | |||
| EN hysteresis | VEN_HYS | 150 | mV | 3 | |||
| EN turn off delay | ENTd-off | 9 | μs | 3 | |||
| VCC load regulation | 1.5 | % | ICC = 5mA | 3 | |||
| Thermal shutdown | TSD | 150 | ºC | 3 | |||
| Thermal hysteresis | THYS | 20 | ºC | 3 | |||
| AAM source current | IAAM | 6.7 | μA | 3 | |||
| OVP delay | OVDEY | 2 | μs | 3 | |||
| VIN supply voltage | VIN | -0.3 | 26 | V | 2 | ||
| Switch node voltage | VSW | -0.3 | 28 | V | -5V < 10ns to 30V < 10ns transient | 2 | |
| All other pins voltage | -0.3 | 5.5 | V | 2 | |||
| Continuous power dissipation | PD | 1.25 | W | TA = +25°C | 2 | ||
| Junction temperature | TJ | 150 | °C | 2 | |||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Supply voltage | VIN | 4.5 | 24 | V | 2 | ||
| Output voltage | VOUT | 0.8 | V | upper limit VIN * DMAX | 2 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 2 |
CAD (KiCad official)
- Symbol:
MP2314SGJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mp2314sgj-z-etched.step/mp2314sgj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2314sgj-z.step/mp2314sgj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (16 pp, sha256
12f88d22371deb83, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).