component
MP1593DN-LF-Z
Public Made by Adomby adom
Monolithic Power Systems Global Sourcing Parts, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| mp1593dn-lf-z-etched.glb | 17d ago |
| mp1593dn-lf-z-etched.step | 17d ago |
| mp1593dn-lf-z-hero.glb | 17d ago |
| mp1593dn-lf-z-hero.overlay.json | 17d ago |
| mp1593dn-lf-z.glb | 17d ago |
| mp1593dn-lf-z.kicad_mod | 17d ago |
| mp1593dn-lf-z.kicad_sym | 17d ago |
| mp1593dn-lf-z.lbr | 17d ago |
| mp1593dn-lf-z.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
MP1593DN-LF-Z
Monolithic Power Systems · Global Sourcing Parts · SOIC-8-EP
MP1593DN-LF-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | input | High-side gate drive boost input supplying the drive for the high-side N-channel MOSFET; connect a 10nF or greater capacitor from SW to BS. |
| 2 | IN | power_in | Power input supplying the IC, to be driven from a 4.75V to 28V source and bypassed to GND with a suitably large capacitor. |
| 3 | SW | power_out | Power switching output node that supplies power to the output LC filter; a capacitor is required from SW to BS. |
| 4 | GND | power_in | Ground; the exposed pad on the package must be connected to pin 4. |
| 5 | FB | input | Feedback input that senses the output voltage through a resistive divider, with the feedback threshold stated as 1.222V. |
| 6 | COMP | passive | Compensation node for the regulation loop, with a series RC network connected from COMP to GND and an additional capacitor sometimes required. |
| 7 | EN | input | Enable input that turns the regulator on when driven high and off when low; it must be below 1.5V for complete low-current shutdown and can be left disconnected for automatic startup. |
| 8 | SS | input | Soft-start control input where a capacitor from SS to GND sets the soft-start period (0.1μF gives 10ms), and leaving it disconnected disables soft-start. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8-EP |
| Category | Global Sourcing Parts |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Shutdown Supply Current | 20 | 30 | μA | VEN = 0V | 3 | ||
| Supply Current | 1 | 1.2 | mA | VEN = 3V, VFB = 1.4V | 3 | ||
| Feedback Voltage | VFB | 1.194 | 1.222 | 1.25 | V | 4.75V ≤ VIN ≤ 28V, VCOMP < 2V | 3 |
| Error Amplifier Transconductance | GEA | 500 | 800 | 1120 | μA/V | ICOMP = 10μA | 3 |
| Current Limit | 4.8 | 6.2 | 7.6 | A | 3 | ||
| Oscillation Frequency | fOSC1 | 335 | 385 | 435 | kHz | 3 | |
| Short Circuit Oscillation Frequency | fOSC2 | 25 | 45 | 60 | kHz | VFB = 0V | 3 |
| EN Rising Threshold | 2.05 | 2.5 | 2.95 | V | 3 | ||
| Enable Pull Up Current | 1 | 1.7 | 2.5 | μA | VEN = 0V | 3 | |
| Under-Voltage Lockout Threshold | 3.75 | 4.05 | 4.35 | V | VIN Rising | 3 | |
| High-Side Switch On-Resistance | RDS(ON)1 | 100 | 140 | mΩ | 3 | ||
| High-Side Switch Leakage Current | 0 | 10 | μA | VEN = 0V, VSW = 0V | 3 | ||
| Input Voltage | VIN | 4.75 | 28 | V | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | C | 2 | ||
| Supply Voltage | VIN | -0.3 | 30 | V | 2 | ||
| Switch Voltage | VSW | -0.5 | V | 2 | |||
| All Other Pins | -0.3 | 6 | V | 2 | |||
| Continuous Power Dissipation | 2.5 | W | TA = +25°C | 2 | |||
| Junction Temperature | 150 | C | 2 | ||||
| Storage Temperature | -65 | 150 | C | 2 | |||
| Thermal Resistance Junction-to-Case (SOIC8E) | θJC | 10 | C/W | 2 |
CAD (KiCad official)
- Symbol:
MP1593DN-LF-Z - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
mp1593dn-lf-z-etched.step/mp1593dn-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp1593dn-lf-z.step/mp1593dn-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (13 pp, sha256
b3435e87f9b88e38, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).