component
MP1488DJ-LF-Z
Public Made by Adomby adom
Monolithic Power Systems LED Drivers, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MP1488DJ-LF-Z
Monolithic Power Systems · LED Drivers · TSOT-23-6
MP1488DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Power switch output that is the drain of the internal MOSFET, connected to the power inductor and output rectifier, and it can swing between GND and 25V. |
| 2 | GND | power_in | Ground pin; the datasheet gives no further limits for it beyond serving as the current sense return for FB. |
| 3 | FB | input | Feedback input that regulates the voltage across the external current sense resistor between FB and GND to 104mV, with the bottom of the LED string connected to FB. |
| 4 | EN | input | Regulator on/off control where a high input turns the converter on and a low input turns it off, and the pin cannot be left floating. |
| 5 | OV | input | Over-voltage input that measures the output voltage for open-circuit protection, connected to the top of the LED string, with the part shutting down if the output exceeds 28V. |
| 6 | IN | power_in | Input supply pin that must be locally bypassed, with an operating input voltage range of 2.5V to 6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Driver ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.5 | 6 | V | 4 | ||
| Supply Current (Shutdown) | 0.1 | 1 | µA | VEN = 0V | 4 | ||
| Supply Current (Quiescent) | 690 | 750 | µA | VFB = 0.15V | 4 | ||
| Switching Frequency | fSW | 1 | 1.3 | 1.5 | MHz | 4 | |
| Maximum Duty Cycle | 85 | 92 | % | VFB = 0V | 4 | ||
| IN Under Voltage Lockout | UVLO | 2.25 | 2.45 | V | VIN Rising | 4 | |
| Under Voltage Lockout Hysteresis | 92 | mV | 4 | ||||
| Open Lamp Shutdown Threshold | VOV | 28 | V | VOV Rising | 4 | ||
| EN Threshold (VIN = 5V) | VEN | 1 | 1.35 | 1.6 | V | VEN Rising, VIN = 5V | 4 |
| EN Threshold (VIN = 2.5V) | VEN | 0.8 | V | VEN Rising, VIN = 2.5V | 4 | ||
| EN Hysteresis | 90 | mV | 4 | ||||
| EN Input Bias Current | 1 | µA | VEN = 0V, 5V | 4 | |||
| FB Voltage | 94 | 104 | 114 | mV | 4 | ||
| FB Input Bias Current | -600 | -300 | nA | VFB = 0.1V | 4 | ||
| SW On-Resistance | RON | 0.5 | Ω | 4 | |||
| SW Current Limit | 800 | mA | Duty Cycle = 60% | 4 | |||
| Thermal Shutdown | 160 | C | 4 | ||||
| SW Pin Voltage | -0.5 | 28.5 | V | 3 | |||
| All Other Pins Voltage | -0.3 | 6.5 | V | 3 | |||
| Storage Temperature | -55 | 150 | C | 3 | |||
| IN Supply Voltage | 2.5 | 6 | V | 3 | |||
| Output Voltage | 25 | V | Range printed as VIN to 25V | 3 | |||
| Operating Temperature | -40 | 85 | C | 3 | |||
| Thermal Resistance Junction-to-Ambient, TSOT23-6 | θJA | 220 | C/W | Measured on approximately 1 inch square of 1 oz copper | 3 | ||
| Thermal Resistance Junction-to-Case, TSOT23-6 | θJC | 110 | C/W | Measured on approximately 1 inch square of 1 oz copper | 3 |
CAD (KiCad official)
- Symbol:
MP1488DJ-LF-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp1488dj-lf-z-etched.step/mp1488dj-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp1488dj-lf-z.step/mp1488dj-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (11 pp, sha256
102caffdf12fb287, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP1488DJ-LF-Z
**Monolithic Power Systems** · LED Drivers · TSOT-23-6
MP1488DJ-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Power switch output that is the drain of the internal MOSFET, connected to the power inductor and output rectifier, and it can swing between GND and 25V. |
| 2 | GND | power_in | Ground pin; the datasheet gives no further limits for it beyond serving as the current sense return for FB. |
| 3 | FB | input | Feedback input that regulates the voltage across the external current sense resistor between FB and GND to 104mV, with the bottom of the LED string connected to FB. |
| 4 | EN | input | Regulator on/off control where a high input turns the converter on and a low input turns it off, and the pin cannot be left floating. |
| 5 | OV | input | Over-voltage input that measures the output voltage for open-circuit protection, connected to the top of the LED string, with the part shutting down if the output exceeds 28V. |
| 6 | IN | power_in | Input supply pin that must be locally bypassed, with an operating input voltage range of 2.5V to 6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Driver ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.5 | | 6 | V | | 4 |
| Supply Current (Shutdown) | | | 0.1 | 1 | µA | VEN = 0V | 4 |
| Supply Current (Quiescent) | | | 690 | 750 | µA | VFB = 0.15V | 4 |
| Switching Frequency | fSW | 1 | 1.3 | 1.5 | MHz | | 4 |
| Maximum Duty Cycle | | 85 | 92 | | % | VFB = 0V | 4 |
| IN Under Voltage Lockout | UVLO | 2.25 | | 2.45 | V | VIN Rising | 4 |
| Under Voltage Lockout Hysteresis | | | 92 | | mV | | 4 |
| Open Lamp Shutdown Threshold | VOV | | 28 | | V | VOV Rising | 4 |
| EN Threshold (VIN = 5V) | VEN | 1 | 1.35 | 1.6 | V | VEN Rising, VIN = 5V | 4 |
| EN Threshold (VIN = 2.5V) | VEN | | 0.8 | | V | VEN Rising, VIN = 2.5V | 4 |
| EN Hysteresis | | | 90 | | mV | | 4 |
| EN Input Bias Current | | | 1 | | µA | VEN = 0V, 5V | 4 |
| FB Voltage | | 94 | 104 | 114 | mV | | 4 |
| FB Input Bias Current | | -600 | | -300 | nA | VFB = 0.1V | 4 |
| SW On-Resistance | RON | | 0.5 | | Ω | | 4 |
| SW Current Limit | | | 800 | | mA | Duty Cycle = 60% | 4 |
| Thermal Shutdown | | | 160 | | C | | 4 |
| SW Pin Voltage | | -0.5 | | 28.5 | V | | 3 |
| All Other Pins Voltage | | -0.3 | | 6.5 | V | | 3 |
| Storage Temperature | | -55 | | 150 | C | | 3 |
| IN Supply Voltage | | 2.5 | | 6 | V | | 3 |
| Output Voltage | | | | 25 | V | Range printed as VIN to 25V | 3 |
| Operating Temperature | | -40 | | 85 | C | | 3 |
| Thermal Resistance Junction-to-Ambient, TSOT23-6 | θJA | | 220 | | C/W | Measured on approximately 1 inch square of 1 oz copper | 3 |
| Thermal Resistance Junction-to-Case, TSOT23-6 | θJC | | 110 | | C/W | Measured on approximately 1 inch square of 1 oz copper | 3 |
## CAD (KiCad official)
- Symbol: `MP1488DJ-LF-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mp1488dj-lf-z-etched.step` / `mp1488dj-lf-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp1488dj-lf-z.step` / `mp1488dj-lf-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175779633422336) (11 pp, sha256 `102caffdf12fb287`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp1488dj-lf-z-datasheet.pdf)