3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP1477GTF-Z
Monolithic Power Systems · DC-DC Converters · SOT-563
MP1477GTF-Z from Monolithic Power Systems, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage pin for a 4.2V to 17V input rail, which must be decoupled by capacitor C1 and connected with a wide PCB trace. |
| 2 | SW | power_out | Switch output node that must be connected with a wide PCB trace and kept short and away from the feedback network. |
| 3 | GND | power_in | System ground and reference ground of the regulated output voltage, to be connected with copper traces and vias. |
| 4 | BST | passive | Bootstrap pin that requires a 1µF BST capacitor and a resistor between SW and BST to form a floating supply for the high-side switch driver. |
| 5 | EN | input | Enable pin where driving it high enables the MP1477, and a 100kΩ pull-up resistor to VIN provides automatic start-up. |
| 6 | FB | input | Feedback pin connected to the tap of an external resistor divider from the output to GND, where the frequency foldback comparator lowers the oscillator frequency when FB drops below 600mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOT-563 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current (shutdown) | IIN | 10 | μA | VEN = 0V | 4 | ||
| Supply current (quiescent) | IQ | 170 | 200 | 240 | μA | VEN = 2V, VFB = 0.85V | 4 |
| HS switch on resistance | HSRDS(ON) | 58 | mΩ | VBST-SW = 3.3V | 4 | ||
| LS switch on resistance | LSRDS(ON) | 27 | mΩ | 4 | |||
| Switch leakage | SWLKG | 10 | μA | VEN = 0V, VSW = 12V | 4 | ||
| Valley current limit | ILIMIT | 2.7 | 4 | 5.8 | A | VOUT = 0V | 4 |
| ZCD current | IZCD | -250 | 20 | 250 | mA | VOUT = 3.3V, Lo = 2.2μH, IOUT = 0A | 4 |
| Oscillator frequency | fSW | 600 | 800 | 1000 | kHz | VFB = 0.75V | 4 |
| Minimum on time | TON_MIN | 45 | ns | 4 | |||
| Minimum off time | TOFF_MIN | 180 | ns | 4 | |||
| Feedback voltage (TJ = +25°C) | VREF | 793 | 805 | 817 | mV | TJ = +25°C | 4 |
| Feedback voltage (TJ = -40°C to 125°C) | VREF | 789 | 805 | 821 | mV | TJ = -40°C to 125°C | 4 |
| Feedback current | IFB | 10 | 100 | nA | 4 | ||
| FB UV threshold (H to L) | VUV_th | 75 | % VREF | Hiccup entry | 4 | ||
| Hiccup duty cycle | DHiccup | 25 | % | 4 | |||
| EN rising threshold | VEN_RISING | 1.14 | 1.2 | 1.26 | V | 4 | |
| EN hysteresis | VEN_HYS | 100 | mV | 4 | |||
| EN input current | IEN | 2 | µA | VEN = 2V | 4 | ||
| VIN under-voltage lockout threshold rising | INUVVth | 3.7 | 4 | 4.18 | V | 4 | |
| VIN under-voltage lockout threshold hysteresis | INUVHYS | 330 | mV | 4 | |||
| Soft-start period | TSS | 1.6 | 2.5 | 3 | ms | 4 | |
| Thermal shutdown | TSD | 150 | °C | 4 | |||
| Thermal hysteresis | TSDHYS | 20 | °C | 4 | |||
| Supply voltage (VIN) | VIN | 4.2 | 17 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Input voltage VIN absolute maximum | VIN | -0.3 | 18 | V | 3 | ||
| Switch voltage VSW absolute minimum | VSW | -0.6 | V | -6.5V for <10ns; max VIN + 0.3V (19V for <10ns) | 3 | ||
| EN voltage absolute maximum | VEN | -0.3 | 5 | V | 3 | ||
| All other pins voltage absolute maximum | -0.3 | 5 | V | All other pins | 3 | ||
| Continuous power dissipation | 2.2 | W | TA = +25°C | 3 | |||
| Junction temperature | 150 | °C | 3 | ||||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Thermal resistance junction-to-ambient (EV1477-TF-00A board) | θJA | 55 | °C/W | EV1477-TF-00A (2-layer PCB) | 3 | ||
| Thermal resistance junction-to-ambient (JESD51-7 board) | θJA | 130 | °C/W | JESD51-7 (4-layer PCB) | 3 |
CAD (KiCad official)
- Symbol:
MP1477GTF-Z - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
mp1477gtf-z-etched.step/mp1477gtf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp1477gtf-z.step/mp1477gtf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (19 pp, sha256
36689081dd332dd5, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).