component
MP1470BGJ-Z
Public Made by Adomby adom
Monolithic Power Systems DC-DC Converters, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MP1470BGJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-6
MP1470BGJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | System ground and reference ground of the regulated output voltage; it requires extra care during PCB layout and should be connected to GND with copper traces and vias. |
| 2 | SW | output | Switch output; connect using a wide PCB trace. |
| 3 | IN | power_in | Supply voltage for the MP1470B, which operates from a 4.7V to 16V input rail; it requires C1 to decouple the input rail and should be connected using a wide PCB trace. |
| 4 | FB | input | Feedback connected to the tap of an external resistor divider from the output to GND to set the output voltage; the frequency foldback comparator lowers the oscillator frequency when FB drops below 140mV to prevent current-limit runaway during a short-circuit fault. |
| 5 | EN | input | Enable pin: driving EN high enables the MP1470B, and for automatic start-up EN should be connected to VIN through a 100kΩ resistor. |
| 6 | BST | passive | Bootstrap pin: connect a capacitor and a resistor between SW and BST to form a floating supply across the high-side switch driver, using a 1µF BST capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) absolute maximum | VIN | -0.3 | 17 | V | 3 | ||
| Switch voltage (VSW) absolute maximum | VSW | -0.3 | 17 | V | Printed as -5V for <10ns (min) and 19V for <10ns (max) as transient limits | 3 | |
| All other pins absolute maximum | -0.3 | 6 | V | All pins other than VIN and VSW | 3 | ||
| Continuous power dissipation | PD | 1.25 | W | TA = +25°C | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature | 260 | °C | 3 | ||||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Supply voltage (recommended) | VIN | 4.7 | 16 | V | 3 | ||
| Output voltage (recommended) | VOUT | 0.8 | V | Maximum printed as VIN*DMAX (not a numeric value) | 3 | ||
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 3 | ||
| Junction-to-ambient thermal resistance, TSOT23-6 | θJA | 100 | °C/W | JESD51-7, 4-layer PCB | 3 | ||
| Junction-to-case thermal resistance, TSOT23-6 | θJC | 55 | °C/W | JESD51-7, 4-layer PCB | 3 | ||
| Oscillator frequency | fSW | 400 | 490 | 580 | kHz | VFB = 0.75V (table: VIN = 12V, TA = 25°C) | 4 |
| Feedback voltage | VFB | 776 | 800 | 824 | mV | Table: VIN = 12V, TA = 25°C | 4 |
| EN rising threshold | VEN RISING | 1.4 | 1.5 | 1.6 | V | Table: VIN = 12V, TA = 25°C | 4 |
| EN falling threshold | VEN FALLING | 1.23 | 1.32 | 1.41 | V | Table: VIN = 12V, TA = 25°C | 4 |
| VIN under-voltage lockout threshold, rising | INUVVth | 3.85 | 4.2 | 4.55 | V | Table: VIN = 12V, TA = 25°C | 4 |
CAD (KiCad official)
- Symbol:
MP1470BGJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp1470bgj-z-etched.step/mp1470bgj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp1470bgj-z.step/mp1470bgj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (18 pp, sha256
cfd2b3dd5d39cd68, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP1470BGJ-Z
**Monolithic Power Systems** · DC-DC Converters · TSOT-23-6
MP1470BGJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | System ground and reference ground of the regulated output voltage; it requires extra care during PCB layout and should be connected to GND with copper traces and vias. |
| 2 | SW | output | Switch output; connect using a wide PCB trace. |
| 3 | IN | power_in | Supply voltage for the MP1470B, which operates from a 4.7V to 16V input rail; it requires C1 to decouple the input rail and should be connected using a wide PCB trace. |
| 4 | FB | input | Feedback connected to the tap of an external resistor divider from the output to GND to set the output voltage; the frequency foldback comparator lowers the oscillator frequency when FB drops below 140mV to prevent current-limit runaway during a short-circuit fault. |
| 5 | EN | input | Enable pin: driving EN high enables the MP1470B, and for automatic start-up EN should be connected to VIN through a 100kΩ resistor. |
| 6 | BST | passive | Bootstrap pin: connect a capacitor and a resistor between SW and BST to form a floating supply across the high-side switch driver, using a 1µF BST capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) absolute maximum | VIN | -0.3 | | 17 | V | | 3 |
| Switch voltage (VSW) absolute maximum | VSW | -0.3 | | 17 | V | Printed as -5V for <10ns (min) and 19V for <10ns (max) as transient limits | 3 |
| All other pins absolute maximum | | -0.3 | | 6 | V | All pins other than VIN and VSW | 3 |
| Continuous power dissipation | PD | | | 1.25 | W | TA = +25°C | 3 |
| Junction temperature | TJ | | | 150 | °C | | 3 |
| Lead temperature | | | | 260 | °C | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Supply voltage (recommended) | VIN | 4.7 | | 16 | V | | 3 |
| Output voltage (recommended) | VOUT | 0.8 | | | V | Maximum printed as VIN*DMAX (not a numeric value) | 3 |
| Operating junction temperature (recommended) | TJ | -40 | | 125 | °C | | 3 |
| Junction-to-ambient thermal resistance, TSOT23-6 | θJA | | 100 | | °C/W | JESD51-7, 4-layer PCB | 3 |
| Junction-to-case thermal resistance, TSOT23-6 | θJC | | 55 | | °C/W | JESD51-7, 4-layer PCB | 3 |
| Oscillator frequency | fSW | 400 | 490 | 580 | kHz | VFB = 0.75V (table: VIN = 12V, TA = 25°C) | 4 |
| Feedback voltage | VFB | 776 | 800 | 824 | mV | Table: VIN = 12V, TA = 25°C | 4 |
| EN rising threshold | VEN RISING | 1.4 | 1.5 | 1.6 | V | Table: VIN = 12V, TA = 25°C | 4 |
| EN falling threshold | VEN FALLING | 1.23 | 1.32 | 1.41 | V | Table: VIN = 12V, TA = 25°C | 4 |
| VIN under-voltage lockout threshold, rising | INUVVth | 3.85 | 4.2 | 4.55 | V | Table: VIN = 12V, TA = 25°C | 4 |
## CAD (KiCad official)
- Symbol: `MP1470BGJ-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mp1470bgj-z-etched.step` / `mp1470bgj-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp1470bgj-z.step` / `mp1470bgj-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922718353309696) (18 pp, sha256 `cfd2b3dd5d39cd68`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp1470bgj-z-datasheet.pdf)