main
Ray
mod8id-shcf-u: laser-etched CAD + chip hero (factory 2.0.0 backfill)
88acf16
MOD8ID-SHCF-U
MODSEMI · Security Verification / Encryption ICs · SOP-8
MOD8ID-SHCF-U from MODSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 2 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 3 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 4 | GND | power_in | Ground reference. Connect to system ground. |
| 5 | SDA | bidirectional | I2C Serial Data line. Open-drain bidirectional data pin; requires an external pull-up resistor (typically 10 kΩ per Figure 2-1) to VCC. Supports 400 kHz / 1 MHz operation. |
| 6 | SCL | input | I2C Serial Clock input from host MCU. Requires an external pull-up resistor (typically 10 kΩ per Figure 2-1) to VCC. Supports 400 kHz / 1 MHz operation. |
| 7 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 8 | VCC | power_in | Power supply input, 1.62 V to 3.3 V operating range. Decouple locally with Cvcc (see Figure 2-1). Typical Icc ≈ 1.6 mA at 3.3 V during I/O transfers. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MODSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MOD8ID-SHCF-UMOD8ID-SHCF-RMOD8ID-SHCF-UDMCF-UMOD8ID-SHCF-UDMCF-R
CAD (KiCad official)
- Symbol:
MOD8ID-SHCF-U - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mod8id-shcf-u-etched.step/mod8id-shcf-u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mod8id-shcf-u.step/mod8id-shcf-u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MODSEMI datasheet (11 pp, sha256
ebdfb30a22b9dfe6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MOD8ID-SHCF-U
**MODSEMI** · Security Verification / Encryption ICs · SOP-8
MOD8ID-SHCF-U from MODSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 2 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 3 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 4 | GND | power_in | Ground reference. Connect to system ground. |
| 5 | SDA | bidirectional | I2C Serial Data line. Open-drain bidirectional data pin; requires an external pull-up resistor (typically 10 kΩ per Figure 2-1) to VCC. Supports 400 kHz / 1 MHz operation. |
| 6 | SCL | input | I2C Serial Clock input from host MCU. Requires an external pull-up resistor (typically 10 kΩ per Figure 2-1) to VCC. Supports 400 kHz / 1 MHz operation. |
| 7 | NC | unconnected | No connect. Leave floating or tie to GND per board practice. |
| 8 | VCC | power_in | Power supply input, 1.62 V to 3.3 V operating range. Decouple locally with Cvcc (see Figure 2-1). Typical Icc ≈ 1.6 mA at 3.3 V during I/O transfers. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MODSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `MOD8ID-SHCF-U`
- `MOD8ID-SHCF-R`
- `MOD8ID-SHCF-UDMCF-U`
- `MOD8ID-SHCF-UDMCF-R`
## CAD (KiCad official)
- Symbol: `MOD8ID-SHCF-U`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mod8id-shcf-u-etched.step` / `mod8id-shcf-u-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mod8id-shcf-u.step` / `mod8id-shcf-u.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MODSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590237067042463744) (11 pp, sha256 `ebdfb30a22b9dfe6`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mod8id-shcf-u-datasheet.pdf)