main
Ray moc8101-x017t: footprint re-picked to Vishay_Intertech_MOC8101_0c20f6 from the maker drawing e687235
(footprint "Vishay_Intertech_MOC8101_0c20f6"
	(version 20240108)
	(generator "adom_assets")
	(layer "F.Cu")
	(descr "Derived host land (Vishay prints no option-7 land: not in the MOC8101 data sheet (doc 83660 Rev 1.8), not in Option Information doc 83713 p.5 ('Clearance and creepage distances must be considered for the solder pad design'), not in the SMD optocoupler brochure sg2098; the data sheet's Footprints link (doc?84494) is a dead page. MOC8101 data sheet p.5 'PACKAGE DIMENSIONS', Option 7: lead centres 7.62 typ., inner foot ends 8 min., tip span 8.4 min. to 10.3 max., pitch 2.54 typ. Land reused from Broadcom's 300 mil gull-wing 'LAND PATTERN RECOMMENDATION' (ACPL-T350 data sheet p.3; same on HCPL-3140 p.3): pads 2.0 long at 10.9 outer, centres x +/-4.45, end pads 1.016 wide and middle pads 1.27 (here pins 2 and 5). Each pad spans 3.45 to 5.45 from centre, covering Vishay's full foot range of 4.0 (8 min./2) to 5.15 (10.3 max./2). Task master decision 2026-11-12, same treatment as E22-900M22S and XT30.; family D0c20f6, spec 0c20f6c4d5)")
	(tags "adom generated")
	(attr smd)
	(property "Reference" "REF**" (at 0 -5.55 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))
	(property "Value" "Vishay_Intertech_MOC8101_0c20f6" (at 0 5.55 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))
	(fp_line (start -3.2 -4.3) (end 3.2 -4.3) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start 3.2 -4.3) (end 3.2 4.3) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start 3.2 4.3) (end -3.2 4.3) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start -3.2 4.3) (end -3.2 -4.3) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start -5.7 -4.55) (end 5.7 -4.55) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start 5.7 -4.55) (end 5.7 4.55) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start 5.7 4.55) (end -5.7 4.55) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start -5.7 4.55) (end -5.7 -4.55) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start -5.85 -3.048) (end -5.85 -2.032) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))
	(pad "1" smd rect (at -4.45 -2.54) (size 2 1.016) (layers "F.Cu" "F.Paste" "F.Mask"))
	(pad "2" smd rect (at -4.45 0) (size 2 1.27) (layers "F.Cu" "F.Paste" "F.Mask"))
	(pad "3" smd rect (at -4.45 2.54) (size 2 1.016) (layers "F.Cu" "F.Paste" "F.Mask"))
	(pad "4" smd rect (at 4.45 2.54) (size 2 1.016) (layers "F.Cu" "F.Paste" "F.Mask"))
	(pad "5" smd rect (at 4.45 0) (size 2 1.27) (layers "F.Cu" "F.Paste" "F.Mask"))
	(pad "6" smd rect (at 4.45 -2.54) (size 2 1.016) (layers "F.Cu" "F.Paste" "F.Mask"))
	(model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/Vishay_Intertech_MOC8101_0c20f6.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))
)