# MOC3062TVM

**onsemi** · Triac, SCR Output Optoisolators · DIP-6

MOC3062TVM from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode of the GaAs infrared emitting diode, rated for a continuous forward current of 60 mA and a reverse voltage of 6 V. |
| 2 | CATHODE | passive | LED cathode of the GaAs infrared emitting diode; the LED is rated for 60 mA continuous forward current and 6 V reverse voltage. |
| 3 | N/C | unconnected | Not connected, as labelled N/C on the datasheet pin diagram. |
| 4 | MAIN TERM. | passive | Triac main terminal of the zero-crossing bilateral driver output, with off-state output voltage VDRM of 600 V and peak repetitive on-state current ITM of 100 mA. |
| 5 | NC* | unconnected | Do not connect; this pin is the triac substrate. |
| 6 | MAIN TERM. | passive | Triac main terminal of the zero-crossing bilateral driver output, with off-state output voltage VDRM of 600 V and peak repetitive on-state current ITM of 100 mA. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 |  | 150 | °C |  | 2 |
| Operating Temperature | TOPR | -40 |  | 85 | °C |  | 2 |
| Junction Temperature Range | TJ | -40 |  | 100 | °C |  | 2 |
| Lead Solder Temperature | TSOL |  |  | 260 | °C | for 10 seconds | 2 |
| Total Device Power Dissipation | PD |  |  | 250 | mW | at 25°C ambient | 2 |
| Continuous Forward Current | IF |  |  | 60 | mA |  | 2 |
| Reverse Voltage | VR |  |  | 6 | V |  | 2 |
| Total Power Dissipation (emitter) | PD |  |  | 120 | mW | at 25°C ambient | 2 |
| Off-State Output Terminal Voltage | VDRM |  |  | 600 | V |  | 2 |
| Peak Non-Repetitive Surge Current | ITSM |  |  | 1 | Apeak | Single Cycle 60 Hz Sine Wave | 2 |
| Peak Repetitive On-State Current | ITM |  |  | 100 | mApeak |  | 2 |
| Total Power Dissipation (detector) | PD |  |  | 150 | mW | at 25°C ambient | 2 |
| Input Forward Voltage | VF |  | 1.3 | 1.5 | V | IF = 30 mA | 3 |
| Reverse Leakage Current | IR |  | 0.005 | 100 | µA | VR = 6 V | 3 |
| Peak Blocking Current, Either Direction | IDRM1 |  | 10 | 500 | nA | VDRM = 600 V, IF = 0 (Note 1) | 3 |
| Critical Rate of Rise of Off-State Voltage | dv/dt | 600 | 1500 |  | V/s | IF = 0 (Note 2) | 3 |
| LED Trigger Current (Rated IFT) | IFT |  |  | 10 | mA | Main Terminal Voltage = 3 V (Note 3) | 3 |
| Peak On-State Voltage, Either Direction | VTM |  | 1.8 | 3 | V | ITM = 100 mA peak, IF = rated IFT | 3 |
| Inhibit Voltage (MT1-MT2 Voltage Above Which Device will not Trigger) | VINH |  | 12 | 20 | V | IF = rated IFT | 3 |
| Leakage in Inhibited State | IDRM2 |  |  | 2 | mA | IF = rated IFT, VDRM = 600 V, off-state | 3 |
| Isolation Voltage | VISO | 4170 |  |  | VACRMS | f = 60 Hz, t = 1 Minute | 3 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ABS |  | RIO Insulation Resistance at TS, VIO = 500 V >109 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) | 2 |

## CAD (KiCad official)

- Symbol: `MOC3062TVM`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `moc3062tvm-etched.step` / `moc3062tvm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `moc3062tvm.step` / `moc3062tvm.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588929703117381632) (12 pp, sha256 `eac908af9353109f`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/moc3062tvm-datasheet.pdf)