component
MOC3062M
Public Made by Adomby adom
onsemi Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MOC3062M
onsemi · Triac, SCR Output Optoisolators · DIP-6
MOC3062M from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode of the GaAs infrared emitting diode; the datasheet gives a reverse voltage rating of 6 V and a continuous forward current of 60 mA absolute maximum, with recommended IF at or above the rated IFT of 10 mA for the MOC3062M. |
| 2 | CATHODE | passive | LED cathode of the GaAs infrared emitting diode; the datasheet gives a reverse voltage rating of 6 V and a continuous forward current of 60 mA absolute maximum. |
| 3 | N/C | unconnected | Not connected; the datasheet package outline marks this pin as N/C. |
| 4 | MAIN TERM. | passive | Main terminal of the bilateral triac driver output, rated for an off-state output terminal voltage VDRM of 600 V. |
| 5 | NC* | unconnected | Do not connect; this pin is the triac substrate and must be left unconnected. |
| 6 | MAIN TERM. | passive | Main terminal of the bilateral triac driver output, rated for an off-state output terminal voltage VDRM of 600 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 | 150 | °C | All devices | 3 | |
| Operating Temperature | TOPR | -40 | 85 | °C | All devices | 3 | |
| Junction Temperature Range | TJ | -40 | 100 | °C | All devices | 3 | |
| Lead Solder Temperature | TSOL | 260 | °C | for 10 seconds | 3 | ||
| Total Device Power Dissipation at 25°C Ambient | PD | 250 | mW | Total device, 25°C ambient | 3 | ||
| Continuous Forward Current | IF | 60 | mA | Emitter | 3 | ||
| Reverse Voltage | VR | 6 | V | Emitter | 3 | ||
| Total Power Dissipation at 25°C Ambient (Emitter) | PD | 120 | mW | Emitter, 25°C ambient | 3 | ||
| Off-State Output Terminal Voltage | VDRM | 600 | V | Detector | 3 | ||
| Peak Non-Repetitive Surge Current | ITSM | 1 | A | Single cycle 60 Hz sine wave | 3 | ||
| Total Power Dissipation at 25°C Ambient (Detector) | PD | 150 | mW | Detector, 25°C ambient | 3 | ||
| Input Forward Voltage | VF | 1.3 | 1.5 | V | IF = 30 mA | 4 | |
| Reverse Leakage Current | IR | 0.005 | 100 | μA | VR = 6 V | 4 | |
| Peak Blocking Current, Either Direction (MOC306XM) | IDRM1 | 10 | 500 | nA | VDRM = 600 V, IF = 0 | 4 | |
| Critical Rate of Rise of Off-State Voltage (MOC306XM) | dv/dt | 600 | 1500 | V/μs | IF = 0 (Figure 11) | 4 | |
| LED Trigger Current (Rated IFT, MOC3062M) | IFT | 10 | mA | Main Terminal Voltage = 3 V | 4 | ||
| Peak On-State Voltage, Either Direction | VTM | 1.8 | 3 | V | ITM = 100 mA peak, IF = rated IFT | 4 | |
| Holding Current, Either Direction | IH | 500 | μA | All devices | 4 | ||
| Inhibit Voltage (MT1-MT2 voltage above which device will not trigger, MOC3062M) | VINH | 12 | 20 | V | IF = rated IFT | 4 | |
| Leakage in Inhibited State | IDRM2 | 2 | mA | IF = rated IFT, VDRM = 600 V, off-state | 4 | ||
| Isolation Voltage | VISO | 4170 | VACRMS | f = 60 Hz, t = 1 Minute | 4 | ||
| Isolation Resistance | RISO | 1011 | Ω | VI-O = 500 VDC (printed as 1011) | 4 | ||
| Isolation Capacitance | CISO | 0.2 | pF | V = 0 V, f = 1 MHz | 4 |
CAD (KiCad official)
- Symbol:
MOC3062M - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
moc3062m-etched.step/moc3062m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);moc3062m.step/moc3062m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (13 pp, sha256
aea22676e72b0efa, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MOC3062M
**onsemi** · Triac, SCR Output Optoisolators · DIP-6
MOC3062M from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode of the GaAs infrared emitting diode; the datasheet gives a reverse voltage rating of 6 V and a continuous forward current of 60 mA absolute maximum, with recommended IF at or above the rated IFT of 10 mA for the MOC3062M. |
| 2 | CATHODE | passive | LED cathode of the GaAs infrared emitting diode; the datasheet gives a reverse voltage rating of 6 V and a continuous forward current of 60 mA absolute maximum. |
| 3 | N/C | unconnected | Not connected; the datasheet package outline marks this pin as N/C. |
| 4 | MAIN TERM. | passive | Main terminal of the bilateral triac driver output, rated for an off-state output terminal voltage VDRM of 600 V. |
| 5 | NC* | unconnected | Do not connect; this pin is the triac substrate and must be left unconnected. |
| 6 | MAIN TERM. | passive | Main terminal of the bilateral triac driver output, rated for an off-state output terminal voltage VDRM of 600 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 | | 150 | °C | All devices | 3 |
| Operating Temperature | TOPR | -40 | | 85 | °C | All devices | 3 |
| Junction Temperature Range | TJ | -40 | | 100 | °C | All devices | 3 |
| Lead Solder Temperature | TSOL | | | 260 | °C | for 10 seconds | 3 |
| Total Device Power Dissipation at 25°C Ambient | PD | | | 250 | mW | Total device, 25°C ambient | 3 |
| Continuous Forward Current | IF | | | 60 | mA | Emitter | 3 |
| Reverse Voltage | VR | | | 6 | V | Emitter | 3 |
| Total Power Dissipation at 25°C Ambient (Emitter) | PD | | | 120 | mW | Emitter, 25°C ambient | 3 |
| Off-State Output Terminal Voltage | VDRM | | | 600 | V | Detector | 3 |
| Peak Non-Repetitive Surge Current | ITSM | | | 1 | A | Single cycle 60 Hz sine wave | 3 |
| Total Power Dissipation at 25°C Ambient (Detector) | PD | | | 150 | mW | Detector, 25°C ambient | 3 |
| Input Forward Voltage | VF | | 1.3 | 1.5 | V | IF = 30 mA | 4 |
| Reverse Leakage Current | IR | | 0.005 | 100 | μA | VR = 6 V | 4 |
| Peak Blocking Current, Either Direction (MOC306XM) | IDRM1 | | 10 | 500 | nA | VDRM = 600 V, IF = 0 | 4 |
| Critical Rate of Rise of Off-State Voltage (MOC306XM) | dv/dt | 600 | 1500 | | V/μs | IF = 0 (Figure 11) | 4 |
| LED Trigger Current (Rated IFT, MOC3062M) | IFT | | | 10 | mA | Main Terminal Voltage = 3 V | 4 |
| Peak On-State Voltage, Either Direction | VTM | | 1.8 | 3 | V | ITM = 100 mA peak, IF = rated IFT | 4 |
| Holding Current, Either Direction | IH | | | 500 | μA | All devices | 4 |
| Inhibit Voltage (MT1-MT2 voltage above which device will not trigger, MOC3062M) | VINH | 12 | 20 | | V | IF = rated IFT | 4 |
| Leakage in Inhibited State | IDRM2 | | | 2 | mA | IF = rated IFT, VDRM = 600 V, off-state | 4 |
| Isolation Voltage | VISO | 4170 | | | VACRMS | f = 60 Hz, t = 1 Minute | 4 |
| Isolation Resistance | RISO | 1011 | | | Ω | VI-O = 500 VDC (printed as 1011) | 4 |
| Isolation Capacitance | CISO | | 0.2 | | pF | V = 0 V, f = 1 MHz | 4 |
## CAD (KiCad official)
- Symbol: `MOC3062M`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `moc3062m-etched.step` / `moc3062m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `moc3062m.step` / `moc3062m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588897283160727552) (13 pp, sha256 `aea22676e72b0efa`, retrieved 2026-10-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/moc3062m-datasheet.pdf)