component
MOC3041M
Public Made by Adomby adom
AOTE Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| moc3041m-etched.glb | 10d ago |
| moc3041m-etched.step | 10d ago |
| moc3041m-hero.glb | 10d ago |
| moc3041m-hero.overlay.json | 10d ago |
| moc3041m.glb | 10d ago |
| moc3041m.kicad_mod | 10d ago |
| moc3041m.kicad_sym | 10d ago |
| moc3041m.lbr | 10d ago |
| moc3041m.step | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
MOC3041M
AOTE · Triac, SCR Output Optoisolators · DIP-6
MOC3041M from AOTE, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | input | LED anode of the input emitter; forward current is 5 to 15 mA recommended and 60 mA absolute maximum, with MOC3041 trigger current IFT max 15 mA. |
| 2 | Cathode | input | LED cathode of the input emitter; reverse voltage must not exceed 6 V. |
| 3 | NC | unconnected | No connection; the package drawing shows pin 3 as not connected to the LED, with the ZC zero-cross block shown alongside it. |
| 4 | Terminal | passive | Main triac output terminal (MT); off-state voltage VDRM is 400 V for the MOC304X series and on-state RMS current is 100 mA max. |
| 5 | NC | unconnected | No connection on the output side. |
| 6 | Terminal | passive | Main triac output terminal (MT); off-state voltage VDRM is 400 V for the MOC304X series and on-state RMS current is 100 mA max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AOTE |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward voltage | VF | 1.23 | 1.5 | V | IF =20mA | 4 | |
| Back current | IR | 10 | uA | VR =6V | 4 | ||
| LED trigger current (MOC3041) | IFT | 15 | mA | Main terminal Voltage =3V | 4 | ||
| On-state peak voltage | VTM | 3 | V | ITM=100mA peak, IF = Rated IFT | 4 | ||
| Suppression voltage (MT1-MT2 will not be triggered if higher than this voltage) | VInh | 20 | V | IF = Rated IFT | 4 | ||
| Critical rise rate of off-state voltage (MOC304X) | dv/dt | 600 | V/μs | VPEAK =Rated VDRM, IF =0 | 4 | ||
| Off-state peak current (MOC304X) | IDRM1 | 500 | nA | VDRM =Rated VDRM, IF = 0mA | 4 | ||
| Leakage current in suppression state | IDRM2 | 500 | uA | IF = Rated IFT, VDRM=Rated VDRM, Off state | 4 | ||
| Maintain current | IH | 280 | uA | 4 | |||
| Forward current (recommended) | IF | 5 | 15 | mA | 3 | ||
| Peak repetitive surge current (recommended) | ITSM | 1 | A | pw=100μs,120pps | 3 | ||
| On-state current RMS (recommended) | IT(RMS) | 100 | mA | 3 | |||
| Forward current | IF | 60 | mA | 3 | |||
| Backward voltage | VR | 6 | V | 3 | |||
| Power dissipation (input) | PD | 70 | mW | 3 | |||
| Power dissipation derating factor (input, above Ta = 90°C) | PDD | 3.8 | mW/℃ | above Ta = 90°C | 3 | ||
| Off-state output terminal voltage (MOC304X) | VDRM | 400 | V | 3 | |||
| Peak repetitive surge current | ITSM | 1 | A | pw=100μs,120pps | 3 | ||
| On-state current (root mean square value) | IT(RMS) | 100 | mA | 3 | |||
| Power dissipation (output) | PC | 300 | mW | 3 | |||
| Power dissipation derating factor (output, above Ta = 90°C) | PC derating | 7.4 | mW/℃ | above Ta = 90°C | 3 | ||
| Isolation voltage | Viso | 5000 | Vrms | 3 | |||
| Operating temperature | Topr | -55 | 110 | ℃ | 3 | ||
| Storage temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Soldering temperature | Tsol | 260 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
MOC3041M - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
moc3041m-etched.step/moc3041m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);moc3041m.step/moc3041m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AOTE datasheet (13 pp, sha256
b7422e33da398b3d, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).