component
MOC3011M
Public Made by Adomby adom
onsemi Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MOC3011M
onsemi · Triac, SCR Output Optoisolators · DIP-6
MOC3011M from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | Anode of the internal GaAs infrared emitting diode, which is rated for 60 mA maximum continuous forward current and 3 V reverse voltage. |
| 2 | CATHODE | passive | Cathode of the internal GaAs infrared emitting diode; the MOC3011M is guaranteed to trigger at an LED current at or below 10 mA max IFT, and the absolute maximum forward current is 60 mA. |
| 3 | N/C | unconnected | Labeled N/C (no connection) on the schematic; the datasheet gives no electrical function for this pin. |
| 4 | MAIN TERM. | passive | Main terminal of the triac-like light-activated bilateral switch; the MOC3011M off-state output voltage (VDRM) rating is 250 V. |
| 5 | NC* | unconnected | Marked *DO NOT CONNECT (TRIAC SUBSTRATE) on the schematic; it must be left unconnected. |
| 6 | MAIN TERM. | passive | Main terminal of the triac-like light-activated bilateral switch; the MOC3011M off-state output voltage (VDRM) rating is 250 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 | 125 | °C | 3 | ||
| Operating Temperature | TOPR | -40 | 85 | °C | 3 | ||
| Junction Temperature Range | TJ | -40 | 100 | °C | 3 | ||
| Lead Solder Temperature | TSOL | 260 | °C | for 10 seconds | 3 | ||
| Total Device Power Dissipation at 25°C Ambient | PD | 330 | mW | 25°C ambient | 3 | ||
| Emitter Continuous Forward Current | IF | 60 | mA | 3 | |||
| Emitter Reverse Voltage | VR | 3 | V | 3 | |||
| Emitter Total Power Dissipation at 25°C Ambient | PD | 100 | mW | 25°C ambient | 3 | ||
| Off-State Output Terminal Voltage (MOC3010M, MOC3011M, MOC3012M) | VDRM | 250 | V | Device: MOC3010M, MOC3011M, MOC3012M | 3 | ||
| Peak Repetitive Surge Current | ITSM | 1 | A | PW = 100 s, 120 pps | 3 | ||
| Detector Total Power Dissipation at 25°C Ambient | PD | 300 | mW | 25°C ambient | 3 | ||
| Input Forward Voltage | VF | 1.15 | 1.5 | V | IF = 10 mA | 4 | |
| Reverse Leakage Current | IR | 0.01 | 100 | A | VR = 3 V, TA = 25°C | 4 | |
| Peak Blocking Current, Either Direction | IDRM | 10 | 100 | nA | Rated VDRM, IF = 0 | 4 | |
| Peak On-State Voltage, Either Direction | VTM | 1.8 | 3 | V | ITM = 100 mA peak, IF = 0 | 4 | |
| LED Trigger Current (MOC3011M) | IFT | 10 | mA | Voltage = 3 V | 4 | ||
| Isolation Voltage | VISO | 4170 | VACRMS | t = 1 Minute | 4 | ||
| Recommended Operating LED Forward Current (between max IFT and absolute max IF) | IF | 10 | 60 | mA | 4 | ||
| Holding Current, Either Direction | IH | 100 | A | 4 |
CAD (KiCad official)
- Symbol:
MOC3011M - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
moc3011m-etched.step/moc3011m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);moc3011m.step/moc3011m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (12 pp, sha256
dc0d5b8f9860e010, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MOC3011M
**onsemi** · Triac, SCR Output Optoisolators · DIP-6
MOC3011M from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | Anode of the internal GaAs infrared emitting diode, which is rated for 60 mA maximum continuous forward current and 3 V reverse voltage. |
| 2 | CATHODE | passive | Cathode of the internal GaAs infrared emitting diode; the MOC3011M is guaranteed to trigger at an LED current at or below 10 mA max IFT, and the absolute maximum forward current is 60 mA. |
| 3 | N/C | unconnected | Labeled N/C (no connection) on the schematic; the datasheet gives no electrical function for this pin. |
| 4 | MAIN TERM. | passive | Main terminal of the triac-like light-activated bilateral switch; the MOC3011M off-state output voltage (VDRM) rating is 250 V. |
| 5 | NC* | unconnected | Marked *DO NOT CONNECT (TRIAC SUBSTRATE) on the schematic; it must be left unconnected. |
| 6 | MAIN TERM. | passive | Main terminal of the triac-like light-activated bilateral switch; the MOC3011M off-state output voltage (VDRM) rating is 250 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 | | 125 | °C | | 3 |
| Operating Temperature | TOPR | -40 | | 85 | °C | | 3 |
| Junction Temperature Range | TJ | -40 | | 100 | °C | | 3 |
| Lead Solder Temperature | TSOL | | | 260 | °C | for 10 seconds | 3 |
| Total Device Power Dissipation at 25°C Ambient | PD | | | 330 | mW | 25°C ambient | 3 |
| Emitter Continuous Forward Current | IF | | | 60 | mA | | 3 |
| Emitter Reverse Voltage | VR | | | 3 | V | | 3 |
| Emitter Total Power Dissipation at 25°C Ambient | PD | | | 100 | mW | 25°C ambient | 3 |
| Off-State Output Terminal Voltage (MOC3010M, MOC3011M, MOC3012M) | VDRM | | | 250 | V | Device: MOC3010M, MOC3011M, MOC3012M | 3 |
| Peak Repetitive Surge Current | ITSM | | | 1 | A | PW = 100 s, 120 pps | 3 |
| Detector Total Power Dissipation at 25°C Ambient | PD | | | 300 | mW | 25°C ambient | 3 |
| Input Forward Voltage | VF | | 1.15 | 1.5 | V | IF = 10 mA | 4 |
| Reverse Leakage Current | IR | | 0.01 | 100 | A | VR = 3 V, TA = 25°C | 4 |
| Peak Blocking Current, Either Direction | IDRM | | 10 | 100 | nA | Rated VDRM, IF = 0 | 4 |
| Peak On-State Voltage, Either Direction | VTM | | 1.8 | 3 | V | ITM = 100 mA peak, IF = 0 | 4 |
| LED Trigger Current (MOC3011M) | IFT | | | 10 | mA | Voltage = 3 V | 4 |
| Isolation Voltage | VISO | 4170 | | | VACRMS | t = 1 Minute | 4 |
| Recommended Operating LED Forward Current (between max IFT and absolute max IF) | IF | 10 | | 60 | mA | | 4 |
| Holding Current, Either Direction | IH | | 100 | | A | | 4 |
## CAD (KiCad official)
- Symbol: `MOC3011M`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `moc3011m-etched.step` / `moc3011m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `moc3011m.step` / `moc3011m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588895130485207040) (12 pp, sha256 `dc0d5b8f9860e010`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/moc3011m-datasheet.pdf)