Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MMUN2234LT1G

onsemi · Digital Transistors · SOT-23

MMUN2234LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base (input) of the NPN BRT, connected through the integrated 22 k series resistor R1 (R2 = 47 k base-emitter); VIN(fwd) max 40 Vdc, VIN(rev) max 8 Vdc.
2 EMITTER power_in Emitter (ground) of the NPN BRT, connected to circuit ground.
3 COLLECTOR output Collector (output) of the NPN BRT; VCEO max 50 Vdc, VCBO max 50 Vdc, IC continuous max 100 mAdc.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Base Cutoff Current ICBO 100 nAdc VCB = 50 V, IE = 0 4
Collector-Emitter Cutoff Current ICEO 500 nAdc VCE = 50 V, IB = 0 4
Emitter-Base Cutoff Current IEBO 0.13 mAdc VEB = 6.0 V, IC = 0 4
Collector-Base Breakdown Voltage V(BR)CBO 50 Vdc IC = 10 A, IE = 0 4
Collector-Emitter Breakdown Voltage V(BR)CEO 50 Vdc IC = 2.0 mA, IB = 0 (Note 5) 4
DC Current Gain hFE 80 150 IC = 5.0 mA, VCE = 10 V (Note 5) 4
Collector Emitter Saturation Voltage VCE(sat) 0.25 Vdc IC = 10 mA, IB = 1.0 mA (Note 5) 4
Input Voltage (off) Vi(off) 0.9 0.5 Vdc VCE = 5.0 V, IC = 100 A 4
Input Voltage (on) Vi(on) 2 1.2 Vdc VCE = 0.3 V, IC = 2.0 mA 4
Output Voltage (on) VOL 0.2 Vdc VCC = 5.0 V, VB = 2.5 V, RL = 1.0 k 4
Output Voltage (off) VOH 4.9 Vdc VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k 4
Input Resistor R1 15.4 22 28.6 k 4
Resistor Ratio R1/R2 0.38 0.47 0.56 4
Collector-Base Voltage VCBO 50 Vdc TA = 25°C 1
Collector-Emitter Voltage VCEO 50 Vdc TA = 25°C 1
Collector Current - Continuous IC 100 mAdc TA = 25°C 1
Input Forward Voltage VIN(fwd) 40 Vdc TA = 25°C 1
Input Reverse Voltage VIN(rev) 8 Vdc TA = 25°C 1
Junction and Storage Temperature Range TJ, Tstg -55 150 °C SOT-23 (MMUN2234L) 3
Total Device Dissipation, minimum pad (Note 1) PD 246 mW TA = 25°C, FR-4 @ Minimum Pad (Note 1), SOT-23 3
Total Device Dissipation, 1.0x1.0 inch pad (Note 2) PD 400 mW TA = 25°C, FR-4 @ 1.0 x 1.0 Inch Pad (Note 2), SOT-23 3
Derating above 25°C (Note 1) PD 2 mW/°C Derate above 25°C, minimum pad (Note 1) 3
Derating above 25°C (Note 2) PD 3.2 mW/°C Derate above 25°C, 1.0 x 1.0 inch pad (Note 2) 3
Thermal Resistance, Junction to Ambient (Note 1) RθJA 508 °C/W FR-4 @ Minimum Pad (Note 1) 3
Thermal Resistance, Junction to Ambient (Note 2) RθJA 311 °C/W FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) 3
Thermal Resistance, Junction to Lead (Note 1) RθJL 174 °C/W FR-4 @ Minimum Pad (Note 1) 3
Thermal Resistance, Junction to Lead (Note 2) RθJL 208 °C/W FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MMUN2234LT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mmun2234lt1g-etched.step / mmun2234lt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mmun2234lt1g.step / mmun2234lt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (11 pp, sha256 c5484bae08cdc537, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF