main
Ray
Publish 0.1.0
30a401e
MMUN2113LT3G
onsemi · Digital Transistors · SOT-23
MMUN2113LT3G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base (input) of the PNP BRT, connected through the 47 kΩ series resistor R1; input forward voltage max 40 Vdc and input reverse voltage max 10 Vdc. |
| 2 | EMITTER | passive | Emitter (ground) of the PNP transistor, connected to the base-emitter resistor R2 (47 kΩ). |
| 3 | COLLECTOR | output | Collector (output) of the transistor, rated for VCEO 50 Vdc, VCBO 50 Vdc and continuous IC 100 mAdc. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Cutoff Current | ICBO | 100 | nAdc | VCB = 50 V, IE = 0 | 5 | ||
| Collector-Emitter Cutoff Current | ICEO | 500 | nAdc | VCE = 50 V, IB = 0 | 5 | ||
| Emitter-Base Cutoff Current | IEBO | 0.1 | mAdc | VEB = 6.0 V, IC = 0 | 5 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | 50 | Vdc | IC = 10 A, IE = 0 | 5 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CEO | 50 | Vdc | IC = 2.0 mA, IB = 0 | 5 | ||
| DC Current Gain | hFE | 80 | 140 | IC = 5.0 mA, VCE = 10 V | 5 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.25 | Vdc | IC = 10 mA, IB = 0.3 mA | 5 | ||
| Input Voltage (off) | Vi(off) | 1.2 | 0.8 | Vdc | VCE = 5.0 V, IC = 100 A | 5 | |
| Input Voltage (on) | Vi(on) | 3 | 1.6 | Vdc | VCE = 0.3 V, IC = 2.0 mA | 5 | |
| Output Voltage (on) | VOL | 0.2 | Vdc | VCC = 5.0 V, VB = 3.5 V, RL = 1.0 k | 5 | ||
| Output Voltage (off) | VOH | 4.9 | Vdc | VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k | 5 | ||
| Input Resistor | R1 | 32.9 | 47 | 61.1 | k | 5 | |
| Resistor Ratio | R1/R2 | 0.8 | 1 | 1.2 | 5 | ||
| Collector-Base Voltage | VCBO | 50 | Vdc | TA = 25°C | 2 | ||
| Collector-Emitter Voltage | VCEO | 50 | Vdc | TA = 25°C | 2 | ||
| Collector Current - Continuous | IC | 100 | mAdc | TA = 25°C | 2 | ||
| Input Forward Voltage | VIN(fwd) | 40 | Vdc | TA = 25°C | 2 | ||
| Input Reverse Voltage | VIN(rev) | 10 | Vdc | TA = 25°C | 2 | ||
| Total Device Dissipation (min pad) | PD | 246 | mW | TA = 25°C, FR-4 @ Minimum Pad (Note 1) | 4 | ||
| Total Device Dissipation (1x1 inch pad) | PD | 400 | mW | TA = 25°C, FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) | 4 | ||
| Derating above 25°C (min pad) | PD | 2 | mW/°C | Derate above 25°C, Note 1 | 4 | ||
| Derating above 25°C (1x1 inch pad) | PD | 3.2 | mW/°C | Derate above 25°C, Note 2 | 4 | ||
| Thermal Resistance, Junction to Ambient (min pad) | RθJA | 508 | °C/W | Note 1 | 4 | ||
| Thermal Resistance, Junction to Ambient (1x1 inch pad) | RθJA | 311 | °C/W | Note 2 | 4 | ||
| Thermal Resistance, Junction to Lead (min pad) | RθJL | 174 | °C/W | Note 1 | 4 | ||
| Thermal Resistance, Junction to Lead (1x1 inch pad) | RθJL | 208 | °C/W | Note 2 | 4 | ||
| Junction and Storage Temperature Range | TJ, Tstg | -55 | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
MMUN2113LT3G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
mmun2113lt3g-etched.step/mmun2113lt3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mmun2113lt3g.step/mmun2113lt3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
ccba4f9c634e0587, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MMUN2113LT3G
**onsemi** · Digital Transistors · SOT-23
MMUN2113LT3G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base (input) of the PNP BRT, connected through the 47 kΩ series resistor R1; input forward voltage max 40 Vdc and input reverse voltage max 10 Vdc. |
| 2 | EMITTER | passive | Emitter (ground) of the PNP transistor, connected to the base-emitter resistor R2 (47 kΩ). |
| 3 | COLLECTOR | output | Collector (output) of the transistor, rated for VCEO 50 Vdc, VCBO 50 Vdc and continuous IC 100 mAdc. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Cutoff Current | ICBO | | | 100 | nAdc | VCB = 50 V, IE = 0 | 5 |
| Collector-Emitter Cutoff Current | ICEO | | | 500 | nAdc | VCE = 50 V, IB = 0 | 5 |
| Emitter-Base Cutoff Current | IEBO | | | 0.1 | mAdc | VEB = 6.0 V, IC = 0 | 5 |
| Collector-Base Breakdown Voltage | V(BR)CBO | 50 | | | Vdc | IC = 10 A, IE = 0 | 5 |
| Collector-Emitter Breakdown Voltage | V(BR)CEO | 50 | | | Vdc | IC = 2.0 mA, IB = 0 | 5 |
| DC Current Gain | hFE | 80 | 140 | | | IC = 5.0 mA, VCE = 10 V | 5 |
| Collector-Emitter Saturation Voltage | VCE(sat) | | | 0.25 | Vdc | IC = 10 mA, IB = 0.3 mA | 5 |
| Input Voltage (off) | Vi(off) | | 1.2 | 0.8 | Vdc | VCE = 5.0 V, IC = 100 A | 5 |
| Input Voltage (on) | Vi(on) | 3 | 1.6 | | Vdc | VCE = 0.3 V, IC = 2.0 mA | 5 |
| Output Voltage (on) | VOL | | | 0.2 | Vdc | VCC = 5.0 V, VB = 3.5 V, RL = 1.0 k | 5 |
| Output Voltage (off) | VOH | 4.9 | | | Vdc | VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k | 5 |
| Input Resistor | R1 | 32.9 | 47 | 61.1 | k | | 5 |
| Resistor Ratio | R1/R2 | 0.8 | 1 | 1.2 | | | 5 |
| Collector-Base Voltage | VCBO | | | 50 | Vdc | TA = 25°C | 2 |
| Collector-Emitter Voltage | VCEO | | | 50 | Vdc | TA = 25°C | 2 |
| Collector Current - Continuous | IC | | | 100 | mAdc | TA = 25°C | 2 |
| Input Forward Voltage | VIN(fwd) | | | 40 | Vdc | TA = 25°C | 2 |
| Input Reverse Voltage | VIN(rev) | | | 10 | Vdc | TA = 25°C | 2 |
| Total Device Dissipation (min pad) | PD | | | 246 | mW | TA = 25°C, FR-4 @ Minimum Pad (Note 1) | 4 |
| Total Device Dissipation (1x1 inch pad) | PD | | | 400 | mW | TA = 25°C, FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) | 4 |
| Derating above 25°C (min pad) | PD | | | 2 | mW/°C | Derate above 25°C, Note 1 | 4 |
| Derating above 25°C (1x1 inch pad) | PD | | | 3.2 | mW/°C | Derate above 25°C, Note 2 | 4 |
| Thermal Resistance, Junction to Ambient (min pad) | RθJA | | | 508 | °C/W | Note 1 | 4 |
| Thermal Resistance, Junction to Ambient (1x1 inch pad) | RθJA | | | 311 | °C/W | Note 2 | 4 |
| Thermal Resistance, Junction to Lead (min pad) | RθJL | | | 174 | °C/W | Note 1 | 4 |
| Thermal Resistance, Junction to Lead (1x1 inch pad) | RθJL | | | 208 | °C/W | Note 2 | 4 |
| Junction and Storage Temperature Range | TJ, Tstg | -55 | | 150 | °C | | 4 |
## CAD (KiCad official)
- Symbol: `MMUN2113LT3G`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `mmun2113lt3g-etched.step` / `mmun2113lt3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mmun2113lt3g.step` / `mmun2113lt3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mmun2113lt3-d.pdf) (14 pp, sha256 `ccba4f9c634e0587`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mmun2113lt3g-datasheet.pdf)