main
History Download
Ray Publish 0.1.0 1480b12

MMBT3906LT3G

onsemi · Bipolar Transistors - BJT · SOT-23

MMBT3906LT3G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base of the PNP transistor; the datasheet gives the emitter-base voltage limit VEBO of −5.0 Vdc maximum.
2 EMITTER passive Emitter of the PNP transistor; the datasheet gives the emitter-base voltage limit VEBO of −5.0 Vdc and continuous collector current limit IC of −200 mAdc.
3 COLLECTOR passive Collector of the PNP transistor; the datasheet gives limits of VCEO −40 Vdc, VCBO −40 Vdc, continuous IC −200 mAdc and peak ICM −800 mAdc.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector−Emitter Breakdown Voltage V(BR)CEO -40 Vdc IC = −1.0 mAdc, IB = 0 2
Collector−Base Breakdown Voltage V(BR)CBO -40 Vdc IC = −10 Adc, IE = 0 2
Emitter−Base Breakdown Voltage V(BR)EBO -5 Vdc IE = −10 Adc, IC = 0 2
Base Cutoff Current IBL -50 nAdc VCE = −30 Vdc, VEB = −3.0 Vdc 2
Collector Cutoff Current ICEX -50 nAdc VCE = −30 Vdc, VEB = −3.0 Vdc 2
DC Current Gain HFE 60 - IC = −0.1 mAdc, VCE = −1.0 Vdc 2
DC Current Gain HFE 80 - IC = −1.0 mAdc, VCE = −1.0 Vdc 2
DC Current Gain HFE 100 300 - IC = −10 mAdc, VCE = −1.0 Vdc 2
DC Current Gain HFE 30 - IC = −100 mAdc, VCE = −1.0 Vdc 2
Collector−Emitter Saturation Voltage VCE(sat) -0.25 Vdc IC = −10 mAdc, IB = −1.0 mAdc 2
Collector−Emitter Saturation Voltage VCE(sat) -0.4 Vdc IC = −50 mAdc, IB = −5.0 mAdc 2
Base−Emitter Saturation Voltage VBE(sat) -0.65 -0.85 Vdc IC = −10 mAdc, IB = −1.0 mAdc 2
Base−Emitter Saturation Voltage VBE(sat) -0.95 Vdc IC = −50 mAdc, IB = −5.0 mAdc 2
Current−Gain − Bandwidth Product fT 250 MHz IC = −10 mAdc, VCE = −20 Vdc, f = 100 MHz 2
Output Capacitance Cobo 4.5 pF VCB = −5.0 Vdc, IE = 0, f = 1.0 MHz 2
Input Capacitance Cibo 10 pF VEB = −0.5 Vdc, IC = 0, f = 1.0 MHz 2
Input Impedance hie 2 12 k IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz 2
Voltage Feedback Ratio hre 0.1 10 X 10−4 IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz 2
Small−Signal Current Gain hfe 100 400 - IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz 2
Output Admittance hoe 3 60 mhos IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz 2
Noise Figure NF 4 dB IC = −100 Adc, VCE = −5.0 Vdc, RS = 1.0 k, f = 1.0 kHz 2
Delay Time td 35 ns VCC = −3.0 Vdc, VBE = 0.5 Vdc, IC = −10 mAdc, IB1 = −1.0 mAdc 2
Rise Time tr 35 ns 2
Storage Time ts 225 ns VCC = −3.0 Vdc, IC = −10 mAdc, IB1 = IB2 = −1.0 mAdc 2
Fall Time tf 75 ns 2
Collector−Emitter Voltage VCEO -40 Vdc 1
Collector−Base Voltage VCBO -40 Vdc 1
Emitter−Base Voltage VEBO -5 Vdc 1
Collector Current − Continuous IC -200 mAdc 1
Collector Current − Peak ICM -800 mAdc Note 3: reference SOA curve 1
Junction and Storage Temperature TJ, Tstg -65 150 °C 1
Total Device Dissipation, FR−5 Board PD 225 mW FR−5 Board (Note 1) @ TA = 25°C 1
Thermal Resistance, Junction−to−Ambient, FR−5 Board RJA 556 °C/W FR−5 Board (Note 1) 1
Total Device Dissipation, Alumina Substrate PD 300 mW Alumina Substrate (Note 2) @ TA = 25°C 1
Thermal Resistance, Junction−to−Ambient, Alumina Substrate RJA 417 °C/W Alumina Substrate (Note 2) 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MMBT3906LT3G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mmbt3906lt3g-etched.step / mmbt3906lt3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mmbt3906lt3g.step / mmbt3906lt3g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (8 pp, sha256 d6ed93dca61d330e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF