Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
MMBT2484LT1G
onsemi · Bipolar Transistors - BJT · SOT-23
MMBT2484LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base terminal of the NPN low-noise transistor; the datasheet limits emitter-base voltage to VEBO 6.0 Vdc maximum and gives emitter cutoff current IEBO of 10 nAdc maximum at VEB = 5.0 Vdc. |
| 2 | EMITTER | passive | Emitter terminal of the NPN low-noise transistor, rated with collector current IC of 100 mAdc continuous maximum and junction and storage temperature of -55 to +150 °C. |
| 3 | COLLECTOR | passive | Collector terminal of the NPN low-noise transistor, limited to a collector-emitter voltage VCEO of 60 Vdc and collector-base voltage VCBO of 60 Vdc. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Voltage | VCEO | 60 | Vdc | 1 | |||
| Collector-Base Voltage | VCBO | 60 | Vdc | 1 | |||
| Emitter-Base Voltage | VEBO | 6 | Vdc | 1 | |||
| Collector Current - Continuous | IC | 100 | mAdc | 1 | |||
| Junction and Storage Temperature | TJ, Tstg | -55 | 150 | °C | 1 | ||
| Total Device Dissipation, FR-5 Board | PD | 225 | mW | FR-5 Board (Note 1), TA = 25°C | 1 | ||
| Derate above 25°C, FR-5 Board | PD | 1.8 | mW/°C | FR-5 Board (Note 1), derate above 25°C | 1 | ||
| Thermal Resistance, Junction-to-Ambient, FR-5 Board | RJA | 556 | °C/W | FR-5 Board (Note 1) | 1 | ||
| Total Device Dissipation, Alumina Substrate | PD | 300 | mW | Alumina Substrate (Note 2), TA = 25°C | 1 | ||
| Derate above 25°C, Alumina Substrate | PD | 2.4 | mW/°C | Alumina Substrate (Note 2), derate above 25°C | 1 | ||
| Thermal Resistance, Junction-to-Ambient, Alumina Substrate | RJA | 417 | °C/W | Alumina Substrate (Note 2) | 1 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CEO | 60 | Vdc | IC = 10 mAdc, IB = 0 | 2 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | 60 | Vdc | IC = 10 Adc, IE = 0 | 2 | ||
| Emitter-Base Breakdown Voltage | V(BR)EBO | 5 | Vdc | IE = 10 Adc, IC = 0 | 2 | ||
| Collector Cutoff Current | ICBO | 10 | nAdc | VCB = 45 Vdc, IE = 0 | 2 | ||
| Collector Cutoff Current | ICBO | 10 | Adc | VCB = 45 Vdc, IE = 0, TA = 150°C | 2 | ||
| Emitter Cutoff Current | IEBO | 10 | nAdc | VEB = 5.0 Vdc, IC = 0 | 2 | ||
| DC Current Gain | hFE | 250 | IC = 1.0 mAdc, VCE = 5.0 Vdc | 2 | |||
| DC Current Gain | hFE | 800 | IC = 10 mAdc, VCE = 5.0 Vdc | 2 | |||
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.35 | Vdc | IC = 1.0 mAdc, IB = 0.1 mAdc | 2 | ||
| Base-Emitter On Voltage | VBE(on) | 0.95 | Vdc | IC = 1.0 mAdc, VCE = 5.0 Vdc | 2 | ||
| Output Capacitance | Cobo | 6 | pF | VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz | 2 | ||
| Input Capacitance | Cibo | 6 | pF | VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz | 2 | ||
| Noise Figure | NF | 3 | dB | IC = 10 Adc, VCE = 5.0 Vdc, RS = 10 k, f = 1.0 kHz, BW = 200 Hz | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MMBT2484LT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mmbt2484lt1g-etched.step/mmbt2484lt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mmbt2484lt1g.step/mmbt2484lt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (5 pp, sha256
2dbea7e7b55d0789, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).