3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMM32SPIN0280D7P
MindMotion Microelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
MM32SPIN0280D7P from MindMotion Microelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD7 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM3_CH1, COMP2_INP and TIM17_CH1. |
| 2 | PC13 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM2_CH1, COMP2_INM, TIM2_ETR and PWMTRG1; additional function WKP2. |
| 3 | PC14 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM2_CH2, COMP3_INP and PWMTRG2. |
| 4 | PC15 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM2_CH3, COMP3_INM and PWMTRG3. |
| 5 | PD0 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM1_CH1N, I2C1_SDA, UART3_TX, UART1_TX, TIM8_ETR, SPI1_MOSI and COMP2_OUT; additional function OSC_IN. |
| 6 | PD1 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM1_BKIN, I2C1_SCL, UART3_RX, UART1_RX, SPI1_MISO, SPI1_SCK and COMP3_OUT; additional function OSC_OUT. |
| 7 | NRST | input | Reset pin with CMOS input and a non-disconnectable pull-up (RPU typ. 50 kΩ); VIL max 1.47 V and VIH min 1.74 V at VDD = 3.3 V, and pulses shorter than 1.0 µs are filtered. |
| 8 | PC0 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate function TIM8_CH1. |
| 9 | PC1 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM8_CH1N and TIM8_CH2. |
| 10 | PC2 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI2_MISO, TIM8_CH2 and TIM8_CH3. |
| 11 | PC3 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI2_MOSI, TIM8_CH2N and TIM8_CH1N. |
| 12 | VSSA | power_in | Analog ground; VDDA and VSSA may be connected to VDD and VSS respectively or powered separately at voltages consistent with VDD and VSS. |
| 13 | VDDA | power_in | Analog supply for the ADC, reset block, oscillators and PLL, 2.0 V to 5.5 V; performance is guaranteed from 2.5 V to 5.5 V and VDDA must match VDD within 300 mV. |
| 14 | PA0 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_CTS, TIM2_CH1, TIM2_ETR, PWMTRG1, TIM14_CH1 and COMP4_OUT; additional functions ADC1_VIN[0] and WKP1. |
| 15 | PA1 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_RTS, TIM2_CH2, PWMTRG2 and TIM1_CH2; additional function ADC1_VIN[1]. |
| 16 | PA2 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_TX, TIM2_CH3, PWMTRG3, TIM1_CH2N and COMP5_OUT; additional functions ADC1_VIN[2] and WKP3. |
| 17 | PA3 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_RX, TIM2_CH4 and TIM1_CH3; additional function ADC1_VIN[3]. |
| 18 | PD4 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_MISO, SPI1_MOSI, TIM8_CH3, TIM8_CH2N and COMP1_OUT. |
| 19 | PD5 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_MOSI, SPI1_MISO, TIM8_CH3N and COMP2_OUT. |
| 20 | PA4 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_NSS, SPI1_SCK, TIM1_CH3N and TIM14_CH1; additional functions OP1_INP, ADC2_VIN[4] and ADC1_VIN[4]. |
| 21 | PA5 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_SCK, SPI1_NSS, TIM2_CH1 and TIM2_ETR; additional functions OP1_INM, ADC2_VIN[5] and ADC1_VIN[5]. |
| 22 | PA6 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM8_BKIN, TIM16_CH1 and COMP4_OUT; additional functions COMP4_INP1, COMP5_INP1, OP1_OUT, ADC2_VIN[6] and ADC1_VIN[6]. |
| 23 | PA7 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_MOSI, TIM3_CH2, TIM1_CH1N, TIM8_CH1N, TIM14_CH1, TIM17_CH1 and COMP5_OUT; additional functions ADC2_VIN[7] and ADC1_VIN[7]. |
| 24 | PC4 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_TX, TIM3_CH1 and SPI1_MOSI. |
| 25 | PC5 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_RX, TIM3_CH2 and SPI1_MISO; additional function WKP4. |
| 26 | PB0 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM3_CH3, TIM1_CH2N and TIM8_CH2N; additional functions OP2_INP, ADC2_VIN[8] and ADC1_VIN[8]. |
| 27 | PB1 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM8_CH3N, TIM2_CH3 and PWMTRG3; additional functions OP2_INM, ADC2_VIN[9] and ADC1_VIN[9]. |
| 28 | PB2 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate function CSM_CH1_TXRX; additional functions COMP4_INP2, COMP5_INP2, OP2_OUT, ADC2_VIN[10] and ADC1_VIN[10]. |
| 29 | PB10 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions I2C1_SCL, TIM2_CH3, CSM_CH2_TXRX and SPI2_SCK; additional functions COMP4_INP3, COMP5_INP3, OP3_OUT, ADC2_VIN[11] and ADC1_VIN[11]. |
| 30 | PB11 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions I2C1_SDA and TIM2_CH4; additional function OP3_INM. |
| 31 | VSSIO | power_in | I/O ground pin; all VSS and VSSA pins must be connected to the external supply system within the permitted range. |
| 32 | VDDIO | power_in | Digital I/O supply pin; VDD is 2.0 V to 5.5 V and supplies the I/O pins and the internal regulator. |
| 33 | PB12 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI2_NSS, SPI2_SCK, TIM1_BKIN, SPI2_MOSI and SPI2_MISO; additional functions OP3_INP, COMP4_INM0 and COMP5_INM0. |
| 34 | PB13 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI2_SCK, SPI2_MISO, TIM1_CH1N, SPI2_NSS, SPI2_MOSI, I2C1_SCL and TIM17_CH1; additional function ADC2_VIN[3]. |
| 35 | PB14 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI2_MOSI, TIM1_CH2N, SPI2_SCK, SPI2_NSS and I2C1_SDA, with SPI2_MISO also listed in the pin definition; additional function ADC2_VIN[2]. |
| 36 | PB15 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI2_MOSI, SPI2_NSS, TIM1_CH3N, SPI2_MISO and SPI2_SCK; additional functions ADC2_VIN[1], OP4_INP and WKP6. |
| 37 | PC6 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART3_TX, TIM3_CH1, TIM8_CH1, TIM3_CH3 and SPI1_NSS. |
| 38 | PC7 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART3_RX, TIM3_CH2, TIM8_CH2, TIM2_CH1, TIM2_ETR, PWMTRG1 and SPI1_SCK. |
| 39 | PC8 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART3_TX, TIM3_CH3, TIM8_CH3, TIM2_CH2 and PWMTRG2. |
| 40 | PC9 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART3_RX, TIM3_CH4, TIM8_CH4, TIM2_CH3 and PWMTRG3. |
| 41 | PA8 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions MCO and TIM1_CH1; additional functions OP4_INM, COMP4_INM1 and COMP5_INM1. |
| 42 | PA9 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_TX, TIM1_CH2, UART1_RX, I2C1_SCL and MCO; additional functions OP4_OUT, ADC1_VIN[12], ADC2_VIN[12] and DAC_OUT1 (DAC signal output through OP4, per the datasheet footnote 3). |
| 43 | PA10 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM17_BKIN, UART1_RX, TIM1_CH3, UART1_TX, I2C1_SDA and TIM16_CH1; additional function ADC2_VIN[0]. |
| 44 | PA11 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_TX, UART1_CTS, TIM1_CH4, TIM1_CH3, TIM2_CH1, TIM2_ETR, PWMTRG1, I2C1_SCL, TIM1_BKIN and COMP4_OUT; additional function COMP5_INP0. |
| 45 | PA12 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART2_RX, UART1_RTS, TIM1_ETR, TIM1_CH3N, TIM2_CH2, PWMTRG2, I2C1_SDA, TIM8_BKIN and COMP5_OUT; additional function COMP5_INM2. |
| 46 | PA13 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SWDIO, UART1_RX and COMP2_OUT. |
| 47 | PD2 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions I2C1_SCL and SPI1_NSS; additional function COMP4_INM2. |
| 48 | PD3 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions I2C1_SDA, SPI1_SCK and SPI1_MISO; additional function COMP4_INP0. |
| 49 | PA14 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SWDCLK, UART2_TX, UART1_TX and COMP1_OUT. |
| 50 | PA15 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_NSS, UART2_RX, TIM2_CH1, TIM2_ETR, SPI2_SCK, SPI2_MOSI, SPI2_MISO, TIM1_CH1N and TIM1_CH3N. |
| 51 | PC10 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_TX, SPI2_MISO, SPI2_SCK, SPI2_NSS, SPI2_MOSI and COMP5_OUT. |
| 52 | PC11 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_RX, SPI2_MOSI, SPI2_NSS, SPI2_SCK and SPI2_MISO. |
| 53 | PC12 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_TX, SPI2_SCK, SPI2_MISO, SPI2_MOSI and SPI2_NSS. |
| 54 | PD6 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions TIM3_ETR, TIM1_CH3N, TIM1_CH1, TIM1_CH1N and COMP3_OUT. |
| 55 | PB3 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_SCK, TIM2_CH2, TIM1_CH2N and TIM1_CH3. |
| 56 | PB4 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_MISO, TIM3_CH1, TIM17_BKIN, TIM1_CH3N and TIM1_CH2N. |
| 57 | PB5 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions SPI1_MOSI, TIM3_CH2, TIM16_BKIN, TIM1_CH1 and TIM1_CH2; additional function WKP5. |
| 58 | PB6 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_TX, I2C1_SCL, TIM16_CH1N, TIM1_CH2 and TIM1_CH1N. |
| 59 | PB7 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_RX, I2C1_SDA, TIM17_CH1N, TIM1_CH3 and TIM1_CH1. |
| 60 | BOOT0/PD8 | bidirectional | Standard TC I/O (PD8) whose input must not exceed VDD and which doubles as the BOOT0 pin; with the BOOT bit it selects boot from main Flash, system memory or SRAM at startup; alternate functions UART1_TX and TIM16_CH1N. |
| 61 | PB8 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_RX, I2C1_SCL, TIM16_CH1, TIM1_CH1 and TIM3_CH2; additional function COMP1_INP. |
| 62 | PB9 | bidirectional | Standard TC I/O whose input signal must not exceed VDD; alternate functions UART1_TX, I2C1_SDA, TIM17_CH1, SPI2_NSS and TIM3_CH3; additional function COMP1_INM. |
| 63 | VSSIO | power_in | I/O ground pin; all VSS and VSSA pins must be connected to the external supply system within the permitted range. |
| 64 | VDDIO | power_in | Digital I/O supply pin; VDD is 2.0 V to 5.5 V and supplies the I/O pins and the internal regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MindMotion Microelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDx-VSSx external main supply voltage (incl. VDDA, VSSA) | VDDx-VSSx | -0.3 | 5.8 | V | 39 | ||
| Total supply current through VDD/VDDA | IVDD/VDDA | 120 | mA | 40 | |||
| Total ground current through VSS/VSSA | IVSS/VSSA | -120 | mA | 40 | |||
| Output sink current, any I/O and control pin | IIO | 25 | mA | 40 | |||
| Output source current, any I/O and control pin | IIO | -25 | mA | 40 | |||
| NRST pin injection current | IINJ(PIN) | -5 | 5 | mA | 40 | ||
| HSE OSC_IN pin injection current | IINJ(PIN) | -5 | 5 | mA | 40 | ||
| Sum of injection current, other pins | ∑IINJ(PIN) | -25 | 25 | mA | 40 | ||
| Internal AHB clock frequency | fHCLK | 72 | 96 | MHz | 40 | ||
| Internal APB2 clock frequency | fPCLK2 | 72 | 96 | MHz | 40 | ||
| Internal APB1 clock frequency | fPCLK1 | 72 | 96 | MHz | 40 | ||
| Digital operating voltage | VDD | 2 | 3.3 | 5.5 | V | 40 | |
| Analog operating voltage (guaranteed performance) | VDDA | 2.5 | 3.3 | 5.5 | V | guaranteed performance; must equal VDD | 40 |
| Analog operating voltage (not guaranteed performance) | VDDA | 2 | 2.5 | V | not guaranteed performance | 40 | |
| Power dissipation, LQFP64 | PD | 339 | mW | TA = 85℃ or TA = 105℃ | 40 | ||
| Ambient temperature | TA | -40 | 105 | ℃ | 40 | ||
| Junction temperature range | TJ | -40 | 125 | ℃ | 40 | ||
| VDD rise time | tr | 10 | 500000 | us | 40 | ||
| VDD fall time | tf | 400 | us | 40 | |||
| User external clock frequency (HSE) | fHSE_ext | 8 | 32 | MHz | 44 | ||
| OSC_IN high or low time | tw(HSE) | 15 | ns | 44 | |||
| HSE oscillator frequency | fOSC_IN | 4 | 8 | 12 | MHz | 2V<VDD<3.6V | 45 |
| HSE oscillator frequency | fOSC_IN | 8 | 16 | 24 | MHz | 3.0V<VDD<5.5V | 45 |
| Supported crystal series resistance (ESR) | ESR | 50 | Ω | fOSC_IN=24M, VDD=3V; CL1 CL2 = 16pF | 45 | ||
| Supported crystal series resistance (ESR) | ESR | 120 | Ω | fOSC_IN=12M, VDD=2V; CL1 CL2 = 16pF | 45 | ||
| HSI oscillator accuracy | ACCHSI | -2.5 | 2.5 | % | TA = -40℃~ 105℃ | 46 | |
| HSI oscillator accuracy | ACCHSI | -1.5 | 1.5 | % | TA=0℃~ 85℃ | 46 | |
| HSI oscillator accuracy | ACCHSI | -1 | 1 | % | TA = 25°C | 46 | |
| HSI oscillator startup time | tSU(HSI) | 5 | μS | 46 | |||
| HSI oscillator stabilization time | Tstab(HSI) | 10 | μS | 46 | |||
| LSI oscillator frequency | fLSI | 18.57 | 40 | 69.19 | KHz | 46 | |
| LSI oscillator startup time | tSU(LSI) | 100 | μS | 46 | |||
| LSI oscillator stabilization time | tstab(LSI) | 100 | μS | 46 | |||
| PLL input clock frequency | fPLL_IN | 4 | 8 | 24 | MHz | 47 | |
| PLL input clock duty cycle | DPLL_IN | 20 | 80 | % | 47 | ||
| PLL VCO output frequency range | fvco | 80 | 200 | MHz | 47 | ||
| PLL multiplied output clock frequency | fPLL_OUT | 40 | 100 | MHz | 47 | ||
| Flash endurance (erase/write cycles) | NEND | 20000 | 次 | 47 | |||
| Flash data retention | TDR | 100 | Years | TA = 25℃ | 47 | ||
| Flash average current, read mode | IDD | 6 | mA | 读模式 40MHz | 47 | ||
| Flash average current, write mode | IDD | 7 | mA | 写模式 | 47 | ||
| Flash average current, erase mode | IDD | 2 | mA | 擦除模式 | 47 | ||
| ESD voltage, human body model | VESD(HBM) | 6000 | V | TA = 25℃, ESDA/JEDEC JS-001-2017 | 48 | ||
| ESD voltage, charged device model | VESD(CDM) | 2000 | V | TA = 25℃, ESDA/JEDEC JS-002-2018 | 48 | ||
| Latch-up current | ILU | 100 | mA | TA = 25℃, JESD78E | 48 | ||
| I/O input low-level voltage | VIL | 1.47 | V | 3.3V CMOS port | 48 | ||
| I/O input low-level voltage | VIL | 2.26 | V | 5V CMOS port | 48 | ||
| I/O input high-level voltage | VIH | 1.74 | V | 3.3V CMOS port | 49 | ||
| I/O input high-level voltage | VIH | 2.61 | V | 5V CMOS port | 49 | ||
| I/O Schmitt trigger voltage hysteresis | Vhy | 0.52 | 0.59 | 0.66 | V | 3.3V | 49 |
| I/O Schmitt trigger voltage hysteresis | Vhy | 0.72 | 0.78 | 0.83 | V | 5V | 49 |
| Weak pull-up equivalent resistance | RPU | 27 | 50 | 80 | kΩ | 3.3V; VIN = VSS | 49 |
| Weak pull-up equivalent resistance | RPU | 27 | 50 | 78 | kΩ | 5V; VIN = VSS | 49 |
| Weak pull-down equivalent resistance | RPD | 27 | 50 | 80 | kΩ | 3.3V; VIN = VDD | 49 |
| Weak pull-down equivalent resistance | RPD | 27 | 50 | 78 | kΩ | 5V; VIN = VSS | 49 |
| I/O pin capacitance | CIO | 1 | pF | 49 | |||
| NRST input low-level voltage | VIL(NRST) | 1.47 | V | VDD=3.3V | 50 | ||
| NRST input high-level voltage | VIH(NRST) | 1.74 | V | VDD=3.3V | 50 | ||
| NRST input filtered pulse | VF(NRST) | 1 | uS | 51 | |||
| NRST input non-filtered pulse | VNF(NRST) | 4 | uS | 51 |
CAD (KiCad official)
- Symbol:
MM32SPIN0280D7P - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mm32spin0280d7p-etched.step/mm32spin0280d7p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mm32spin0280d7p.step/mm32spin0280d7p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MindMotion Microelectronics datasheet (72 pp, sha256
7c1d80f1d36ceef4, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).