main
Ray
Publish 0.1.0
7efc983
MM32F0273D8P
MindMotion Microelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
MM32F0273D8P from MindMotion Microelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE2, alternate TIM3_ETR. |
| 2 | PE3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE3, alternate TIM3_CH1. |
| 3 | PE4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE4, alternate TIM3_CH2. |
| 4 | PE5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE5, alternate TIM3_CH3. |
| 5 | PE6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE6, alternates TIM3_CH4 and WKP3. |
| 6 | VBAT | power_in | Backup domain supply, 1.8 V to 3.6 V, powers the RTC, the external 32.768 kHz oscillator and backup registers when VDD is off. |
| 7 | PC13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC13, alternates TAMP1 and WKP2. |
| 8 | PC14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC14. |
| 9 | PC15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC15. |
| 10 | PF9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF9, alternate TIM15_CH1. |
| 11 | PF10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF10, alternate TIM15_CH2. |
| 12 | PF0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF0, alternate CRS_SYNC. |
| 13 | PF1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF1. |
| 14 | NRST | input | Active-low reset input, CMOS Schmitt trigger with a non-disconnectable internal pull-up of about 50 kΩ; inputs below the maximum VIL(NRST) of 1.47 V at VDD=3.3 V are needed to reset. |
| 15 | PC0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC0, alternates EVENTOUT and ADC_IN10. |
| 16 | PC1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC1, alternates EVENTOUT and ADC_IN11. |
| 17 | PC2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC2, alternates EVENTOUT, SPI2_MISO, I2S_MCK and ADC_IN12. |
| 18 | PC3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC3, alternates EVENTOUT, SPI2_MOSI, I2S_SD and ADC_IN13. |
| 19 | PF2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF2, alternate EVENTOUT. |
| 20 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 21 | VDDA | power_in | Analog supply for ADC, reset block, oscillators and PLL, 2.0 V to 5.5 V; must match VDD with at most 300 mV difference. |
| 22 | PF3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF3, alternate EVENTOUT. |
| 23 | PA0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA0, alternates UART2_CTS, TIM2_CH1, TIM2_ETR, UART4_TX, COMP1_OUT, ADC_IN0, COMP1_INP0, COMP2_INP0, COMP1_INM2 and WKP1. |
| 24 | PA1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA1, alternates UART2_RTS, TIM2_CH2, UART4_RX, TIM15_CH1N, ADC_IN1, COMP1_INP1 and COMP2_INP1. |
| 25 | PA2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA2, alternates TIM15_CH1, UART2_TX, TIM2_CH3, COMP2_OUT, ADC_IN2, COMP1_INP2, COMP2_INP2, COMP2_INM2 and WKP4. |
| 26 | PA3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA3, alternates TIM15_CH2, UART2_RX, TIM2_CH4, ADC_IN3, COMP1_INP3 and COMP2_INP3. |
| 27 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 28 | VDDIO | power_in | I/O supply; must be connected to the external supply system within the allowed range (VDD 2.0 V to 5.5 V). |
| 29 | PA4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA4, alternates SPI1_NSS, I2S1_WS, LPUART_TX, TIM14_CH1, ADC_IN4, DAC_OUT, COMP1_INM0 and COMP2_INM0. |
| 30 | PA5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA5, alternates SPI1_SCK, I2S1_CK, TIM2_CH1, TIM2_ETR, LPUART_RX, ADC_IN5, COMP1_INM1 and COMP2_INM1. |
| 31 | PA6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA6, alternates SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, UART3_CTS, TIM16_CH1, EVENTOUT, COMP1_OUT and ADC_IN6. |
| 32 | PA7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA7, alternates SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, EVENTOUT, COMP2_OUT and ADC_IN7. |
| 33 | PC4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC4, alternates EVENTOUT and UART3_TX. |
| 34 | PC5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC5, alternates UART3_RX and WKP5. |
| 35 | PB0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB0, alternates TIM3_CH3, TIM1_CH2N and ADC_IN8. |
| 36 | PB1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB1, alternates TIM14_CH1, TIM3_CH4, TIM1_CH3N, UART3_RTS and ADC_IN9. |
| 37 | PB2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB2, alternate EVENTOUT. |
| 38 | PE7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE7, alternate TIM1_ETR. |
| 39 | PE8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE8, alternate TIM1_CH1N. |
| 40 | PE9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE9, alternate TIM1_CH1. |
| 41 | PE10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE10, alternate TIM1_CH2N. |
| 42 | PE11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE11, alternate TIM1_CH2. |
| 43 | PE12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE12, alternates TIM1_CH3N, SPI1_NSS and I2S1_WS. |
| 44 | PE13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE13, alternates TIM1_CH3, SPI1_SCK and I2S1_CK. |
| 45 | PE14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE14, alternates TIM1_CH4, SPI1_MISO and I2S1_MCK. |
| 46 | PE15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE15, alternates TIM1_BKIN, SPI1_MOSI and I2S1_SD. |
| 47 | PB10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB10, alternates I2C2_SCL, TIM2_CH3, UART3_TX and SPI2_SCK. |
| 48 | PB11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB11, alternates EVENTOUT, I2C2_SDA, TIM2_CH4 and UART3_RX. |
| 49 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 50 | VDDIO | power_in | I/O supply; must be connected to the external supply system within the allowed range (VDD 2.0 V to 5.5 V). |
| 51 | PB12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB12, alternates SPI2_NSS, I2S2_WS, EVENTOUT, TIM1_BKIN and TIM15_BKIN. |
| 52 | PB13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB13, alternates SPI2_SCK, I2S2_CK, TIM1_CH1N, LPTIMER_TRIGGER, UART3_CTS and I2C2_SCL. |
| 53 | PB14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB14, alternates SPI2_MISO, I2S2_MCK, TIM15_CH1, TIM1_CH2N, LPTIMER_OUT, UART3_RTS and I2C2_SDA. |
| 54 | PB15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB15, alternates SPI2_MOSI, I2S2_SD, TIM15_CH2, TIM1_CH3N and TIM15_CH1N. |
| 55 | PD8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD8, alternate UART3_TX. |
| 56 | PD9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD9, alternate UART3_RX. |
| 57 | PD10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD10. |
| 58 | PD11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD11, alternate UART3_CTS. |
| 59 | PD12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD12, alternate UART3_RTS. |
| 60 | PD13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD13. |
| 61 | PD14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD14. |
| 62 | PD15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD15, alternate CRS_SYNC. |
| 63 | PC6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC6, alternate TIM3_CH1. |
| 64 | PC7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC7, alternate TIM3_CH2. |
| 65 | PC8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC8, alternate TIM3_CH3. |
| 66 | PC9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC9, alternate TIM3_CH4. |
| 67 | PA8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA8, alternates MCO, TIM1_CH1 and CRS_SYNC. |
| 68 | PA9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA9, alternates TIM15_BKIN, UART1_TX, TIM1_CH2, UART1_RX, I2C1_SCL and MCO. |
| 69 | PA10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA10, alternates TIM17_BKIN, UART1_RX, TIM1_CH3, UART1_TX and I2C1_SDA. |
| 70 | PA11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA11, alternates UART1_CTS, TIM1_CH4, CAN_RX, I2C1_SCL and COMP1_OUT, and carries USBDM. |
| 71 | PA12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA12, alternates UART1_RTS, TIM1_ETR, CAN_TX, I2C1_SDA and COMP2_OUT, and carries USBDP. |
| 72 | PA13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA13, alternate SWDIO. |
| 73 | PF5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF5. |
| 74 | PF6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF6. |
| 75 | PF7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF7. |
| 76 | PA14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA14, alternates SWCLK and UART2_TX. |
| 77 | PA15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA15, alternates SPI1_NSS, UART2_RX, TIM2_CH1, TIM2_ETR and UART4_RTS. |
| 78 | PC10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC10, alternates UART4_TX and UART3_TX. |
| 79 | PC11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC11, alternates UART4_RX and UART3_RX. |
| 80 | PC12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC12. |
| 81 | PD0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD0, alternates CAN_RX, SPI2_NSS and I2S2_WS. |
| 82 | PD1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD1, alternates CAN_TX, SPI2_SCK and I2S2_MCK. |
| 83 | PD2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD2, alternates TIM3_ETR and UART3_RTS. |
| 84 | PD3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD3, alternates UART2_CTS and SPI2_MISO. |
| 85 | PD4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD4, alternates UART2_RTS and SPI2_MOSI. |
| 86 | PD5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD5, alternate UART2_TX. |
| 87 | PD6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD6, alternate UART2_RX. |
| 88 | PD7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD7. |
| 89 | PB3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB3, alternates SPI1_SCK, I2S1_CK and TIM2_CH2. |
| 90 | PB4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB4, alternates SPI1_MISO, I2S1_MCK, TIM3_CH1 and TIM17_BKIN. |
| 91 | PB5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB5, alternates SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM16_BKIN and WKP6. |
| 92 | PB6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB6, alternates UART1_TX, I2C1_SCL and TIM16_CH1N. |
| 93 | PB7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB7, alternates UART1_RX, I2C1_SDA, TIM17_CH1N and UART4_CTS. |
| 94 | PF4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF4, also serves as the BOOT0 boot-mode pin. |
| 95 | PB8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB8, alternates I2C1_SCL, TIM16_CH1 and CAN_RX. |
| 96 | PB9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB9, alternates I2C1_SDA, TIM17_CH1, EVENTOUT, CAN_TX, SPI2_NSS and I2S2_WS. |
| 97 | PE0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE0, alternates TIM16_CH1 and EVENTOUT. |
| 98 | PE1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE1, alternates TIM17_CH1 and EVENTOUT. |
| 99 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 100 | VDDIO | power_in | I/O supply; must be connected to the external supply system within the allowed range (VDD 2.0 V to 5.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MindMotion Microelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital operating voltage | VDD | 2 | 5.5 | V | 40 | ||
| Analog operating voltage (performance met) | VDDA | 2.5 | 5.5 | V | must be the same as VDD | 40 | |
| Analog operating voltage (performance not guaranteed) | VDDA | 2 | 2.5 | V | performance not guaranteed by this manual | 40 | |
| Backup domain operating voltage | VBAT | 1.8 | 3.6 | V | 40 | ||
| Ambient temperature (industrial) | TA | -40 | 85 | ℃ | 40 | ||
| Ambient temperature (extended industrial, suffix V) | TA | -40 | 105 | ℃ | suffix V | 40 | |
| Junction temperature range (industrial) | TJ | -40 | 105 | ℃ | 40 | ||
| Junction temperature range (extended industrial, suffix V) | TJ | -40 | 125 | ℃ | suffix V | 40 | |
| Internal AHB clock frequency | fHCLK | 96 | MHz | 40 | |||
| Internal APB2 clock frequency | fPCLK2 | 96 | MHz | 40 | |||
| Internal APB1 clock frequency | fPCLK1 | 96 | MHz | 40 | |||
| Voltage characteristic, external main supply | VDDx-VSSx | -0.3 | 5.8 | V | includes VDDA and VSSA | 40 | |
| Voltage characteristic, backup domain supply | VBAT-VSSx | -0.3 | 5.8 | V | 40 | ||
| Total supply current through VDD/VDDA | IVDD/VDDA | 120 | mA | 40 | |||
| Output sink current on any I/O and control pin | IIO | 25 | mA | 40 | |||
| Output source current on any I/O and control pin | IIO | -25 | mA | 40 | |||
| Injection current on NRST pin | IINJ(PIN) | -5 | 5 | mA | 40 | ||
| Injection current on HSE OSC_IN pin | IINJ(PIN) | -5 | 5 | mA | 40 | ||
| Sum of injection currents, other pins | ΣIINJ(PIN) | -25 | 25 | mA | 40 | ||
| HSI oscillator accuracy | ACCHSI | -2.5 | 2.5 | % | TA = -40℃ to 105℃ | 52 | |
| HSI oscillator accuracy at 25℃ | ACCHSI | -1 | 1 | % | TA = 25℃ | 52 | |
| HSE oscillator frequency | fOSC_IN | 4 | 8 | 12 | MHz | 2V<VDD<3.6V | 49 |
| HSE oscillator frequency | fOSC_IN | 8 | 16 | 24 | MHz | 3.0V<VDD<5.5V | 49 |
| Input low-level voltage, 3.3V CMOS port | VIL | 1.47 | V | 3.3V CMOS port | 55 | ||
| Input low-level voltage, 5V CMOS port | VIL | 2.26 | V | 5V CMOS port | 55 | ||
| Input high-level voltage, 3.3V CMOS port | VIH | 1.74 | V | 3.3V CMOS port | 55 | ||
| Input high-level voltage, 5V CMOS port | VIH | 2.61 | V | 5V CMOS port | 55 | ||
| Input leakage current, 3.3V | Ilkg | 1 | μA | 3.3V | 55 | ||
| Weak pull-up equivalent resistance, 3.3V | RPU | 50 | kΩ | 3.3V VIN = VSS | 55 | ||
| I/O pin capacitance | CIO | 10 | pF | 55 | |||
| NRST input low-level voltage | VIL(NRST) | 1.47 | V | VDD=3.3V | 57 | ||
| NRST input high-level voltage | VIH(NRST) | 1.74 | V | VDD=3.3V | 57 |
CAD (KiCad official)
- Symbol:
MM32F0273D8P - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
mm32f0273d8p-etched.step/mm32f0273d8p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mm32f0273d8p.step/mm32f0273d8p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MindMotion Microelectronics datasheet (79 pp, sha256
07aeeaed73ce07b5, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MM32F0273D8P
**MindMotion Microelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
MM32F0273D8P from MindMotion Microelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE2, alternate TIM3_ETR. |
| 2 | PE3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE3, alternate TIM3_CH1. |
| 3 | PE4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE4, alternate TIM3_CH2. |
| 4 | PE5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE5, alternate TIM3_CH3. |
| 5 | PE6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE6, alternates TIM3_CH4 and WKP3. |
| 6 | VBAT | power_in | Backup domain supply, 1.8 V to 3.6 V, powers the RTC, the external 32.768 kHz oscillator and backup registers when VDD is off. |
| 7 | PC13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC13, alternates TAMP1 and WKP2. |
| 8 | PC14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC14. |
| 9 | PC15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC15. |
| 10 | PF9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF9, alternate TIM15_CH1. |
| 11 | PF10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF10, alternate TIM15_CH2. |
| 12 | PF0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF0, alternate CRS_SYNC. |
| 13 | PF1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF1. |
| 14 | NRST | input | Active-low reset input, CMOS Schmitt trigger with a non-disconnectable internal pull-up of about 50 kΩ; inputs below the maximum VIL(NRST) of 1.47 V at VDD=3.3 V are needed to reset. |
| 15 | PC0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC0, alternates EVENTOUT and ADC_IN10. |
| 16 | PC1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC1, alternates EVENTOUT and ADC_IN11. |
| 17 | PC2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC2, alternates EVENTOUT, SPI2_MISO, I2S_MCK and ADC_IN12. |
| 18 | PC3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC3, alternates EVENTOUT, SPI2_MOSI, I2S_SD and ADC_IN13. |
| 19 | PF2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF2, alternate EVENTOUT. |
| 20 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 21 | VDDA | power_in | Analog supply for ADC, reset block, oscillators and PLL, 2.0 V to 5.5 V; must match VDD with at most 300 mV difference. |
| 22 | PF3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF3, alternate EVENTOUT. |
| 23 | PA0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA0, alternates UART2_CTS, TIM2_CH1, TIM2_ETR, UART4_TX, COMP1_OUT, ADC_IN0, COMP1_INP0, COMP2_INP0, COMP1_INM2 and WKP1. |
| 24 | PA1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA1, alternates UART2_RTS, TIM2_CH2, UART4_RX, TIM15_CH1N, ADC_IN1, COMP1_INP1 and COMP2_INP1. |
| 25 | PA2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA2, alternates TIM15_CH1, UART2_TX, TIM2_CH3, COMP2_OUT, ADC_IN2, COMP1_INP2, COMP2_INP2, COMP2_INM2 and WKP4. |
| 26 | PA3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA3, alternates TIM15_CH2, UART2_RX, TIM2_CH4, ADC_IN3, COMP1_INP3 and COMP2_INP3. |
| 27 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 28 | VDDIO | power_in | I/O supply; must be connected to the external supply system within the allowed range (VDD 2.0 V to 5.5 V). |
| 29 | PA4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA4, alternates SPI1_NSS, I2S1_WS, LPUART_TX, TIM14_CH1, ADC_IN4, DAC_OUT, COMP1_INM0 and COMP2_INM0. |
| 30 | PA5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA5, alternates SPI1_SCK, I2S1_CK, TIM2_CH1, TIM2_ETR, LPUART_RX, ADC_IN5, COMP1_INM1 and COMP2_INM1. |
| 31 | PA6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA6, alternates SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, UART3_CTS, TIM16_CH1, EVENTOUT, COMP1_OUT and ADC_IN6. |
| 32 | PA7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA7, alternates SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, EVENTOUT, COMP2_OUT and ADC_IN7. |
| 33 | PC4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC4, alternates EVENTOUT and UART3_TX. |
| 34 | PC5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC5, alternates UART3_RX and WKP5. |
| 35 | PB0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB0, alternates TIM3_CH3, TIM1_CH2N and ADC_IN8. |
| 36 | PB1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB1, alternates TIM14_CH1, TIM3_CH4, TIM1_CH3N, UART3_RTS and ADC_IN9. |
| 37 | PB2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB2, alternate EVENTOUT. |
| 38 | PE7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE7, alternate TIM1_ETR. |
| 39 | PE8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE8, alternate TIM1_CH1N. |
| 40 | PE9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE9, alternate TIM1_CH1. |
| 41 | PE10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE10, alternate TIM1_CH2N. |
| 42 | PE11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE11, alternate TIM1_CH2. |
| 43 | PE12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE12, alternates TIM1_CH3N, SPI1_NSS and I2S1_WS. |
| 44 | PE13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE13, alternates TIM1_CH3, SPI1_SCK and I2S1_CK. |
| 45 | PE14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE14, alternates TIM1_CH4, SPI1_MISO and I2S1_MCK. |
| 46 | PE15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE15, alternates TIM1_BKIN, SPI1_MOSI and I2S1_SD. |
| 47 | PB10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB10, alternates I2C2_SCL, TIM2_CH3, UART3_TX and SPI2_SCK. |
| 48 | PB11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB11, alternates EVENTOUT, I2C2_SDA, TIM2_CH4 and UART3_RX. |
| 49 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 50 | VDDIO | power_in | I/O supply; must be connected to the external supply system within the allowed range (VDD 2.0 V to 5.5 V). |
| 51 | PB12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB12, alternates SPI2_NSS, I2S2_WS, EVENTOUT, TIM1_BKIN and TIM15_BKIN. |
| 52 | PB13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB13, alternates SPI2_SCK, I2S2_CK, TIM1_CH1N, LPTIMER_TRIGGER, UART3_CTS and I2C2_SCL. |
| 53 | PB14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB14, alternates SPI2_MISO, I2S2_MCK, TIM15_CH1, TIM1_CH2N, LPTIMER_OUT, UART3_RTS and I2C2_SDA. |
| 54 | PB15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB15, alternates SPI2_MOSI, I2S2_SD, TIM15_CH2, TIM1_CH3N and TIM15_CH1N. |
| 55 | PD8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD8, alternate UART3_TX. |
| 56 | PD9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD9, alternate UART3_RX. |
| 57 | PD10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD10. |
| 58 | PD11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD11, alternate UART3_CTS. |
| 59 | PD12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD12, alternate UART3_RTS. |
| 60 | PD13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD13. |
| 61 | PD14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD14. |
| 62 | PD15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD15, alternate CRS_SYNC. |
| 63 | PC6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC6, alternate TIM3_CH1. |
| 64 | PC7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC7, alternate TIM3_CH2. |
| 65 | PC8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC8, alternate TIM3_CH3. |
| 66 | PC9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC9, alternate TIM3_CH4. |
| 67 | PA8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA8, alternates MCO, TIM1_CH1 and CRS_SYNC. |
| 68 | PA9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA9, alternates TIM15_BKIN, UART1_TX, TIM1_CH2, UART1_RX, I2C1_SCL and MCO. |
| 69 | PA10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA10, alternates TIM17_BKIN, UART1_RX, TIM1_CH3, UART1_TX and I2C1_SDA. |
| 70 | PA11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA11, alternates UART1_CTS, TIM1_CH4, CAN_RX, I2C1_SCL and COMP1_OUT, and carries USBDM. |
| 71 | PA12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA12, alternates UART1_RTS, TIM1_ETR, CAN_TX, I2C1_SDA and COMP2_OUT, and carries USBDP. |
| 72 | PA13 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA13, alternate SWDIO. |
| 73 | PF5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF5. |
| 74 | PF6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF6. |
| 75 | PF7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF7. |
| 76 | PA14 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA14, alternates SWCLK and UART2_TX. |
| 77 | PA15 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PA15, alternates SPI1_NSS, UART2_RX, TIM2_CH1, TIM2_ETR and UART4_RTS. |
| 78 | PC10 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC10, alternates UART4_TX and UART3_TX. |
| 79 | PC11 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC11, alternates UART4_RX and UART3_RX. |
| 80 | PC12 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PC12. |
| 81 | PD0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD0, alternates CAN_RX, SPI2_NSS and I2S2_WS. |
| 82 | PD1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD1, alternates CAN_TX, SPI2_SCK and I2S2_MCK. |
| 83 | PD2 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD2, alternates TIM3_ETR and UART3_RTS. |
| 84 | PD3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD3, alternates UART2_CTS and SPI2_MISO. |
| 85 | PD4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD4, alternates UART2_RTS and SPI2_MOSI. |
| 86 | PD5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD5, alternate UART2_TX. |
| 87 | PD6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD6, alternate UART2_RX. |
| 88 | PD7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PD7. |
| 89 | PB3 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB3, alternates SPI1_SCK, I2S1_CK and TIM2_CH2. |
| 90 | PB4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB4, alternates SPI1_MISO, I2S1_MCK, TIM3_CH1 and TIM17_BKIN. |
| 91 | PB5 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB5, alternates SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM16_BKIN and WKP6. |
| 92 | PB6 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB6, alternates UART1_TX, I2C1_SCL and TIM16_CH1N. |
| 93 | PB7 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB7, alternates UART1_RX, I2C1_SDA, TIM17_CH1N and UART4_CTS. |
| 94 | PF4 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PF4, also serves as the BOOT0 boot-mode pin. |
| 95 | PB8 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB8, alternates I2C1_SCL, TIM16_CH1 and CAN_RX. |
| 96 | PB9 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PB9, alternates I2C1_SDA, TIM17_CH1, EVENTOUT, CAN_TX, SPI2_NSS and I2S2_WS. |
| 97 | PE0 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE0, alternates TIM16_CH1 and EVENTOUT. |
| 98 | PE1 | bidirectional | Standard TC I/O whose input must not exceed VDD; main function PE1, alternates TIM17_CH1 and EVENTOUT. |
| 99 | VSSIO | power_in | I/O ground; must be connected to the external supply system within the allowed range. |
| 100 | VDDIO | power_in | I/O supply; must be connected to the external supply system within the allowed range (VDD 2.0 V to 5.5 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MindMotion Microelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital operating voltage | VDD | 2 | | 5.5 | V | | 40 |
| Analog operating voltage (performance met) | VDDA | 2.5 | | 5.5 | V | must be the same as VDD | 40 |
| Analog operating voltage (performance not guaranteed) | VDDA | 2 | | 2.5 | V | performance not guaranteed by this manual | 40 |
| Backup domain operating voltage | VBAT | 1.8 | | 3.6 | V | | 40 |
| Ambient temperature (industrial) | TA | -40 | | 85 | ℃ | | 40 |
| Ambient temperature (extended industrial, suffix V) | TA | -40 | | 105 | ℃ | suffix V | 40 |
| Junction temperature range (industrial) | TJ | -40 | | 105 | ℃ | | 40 |
| Junction temperature range (extended industrial, suffix V) | TJ | -40 | | 125 | ℃ | suffix V | 40 |
| Internal AHB clock frequency | fHCLK | | | 96 | MHz | | 40 |
| Internal APB2 clock frequency | fPCLK2 | | | 96 | MHz | | 40 |
| Internal APB1 clock frequency | fPCLK1 | | | 96 | MHz | | 40 |
| Voltage characteristic, external main supply | VDDx-VSSx | -0.3 | | 5.8 | V | includes VDDA and VSSA | 40 |
| Voltage characteristic, backup domain supply | VBAT-VSSx | -0.3 | | 5.8 | V | | 40 |
| Total supply current through VDD/VDDA | IVDD/VDDA | | | 120 | mA | | 40 |
| Output sink current on any I/O and control pin | IIO | | | 25 | mA | | 40 |
| Output source current on any I/O and control pin | IIO | -25 | | | mA | | 40 |
| Injection current on NRST pin | IINJ(PIN) | -5 | | 5 | mA | | 40 |
| Injection current on HSE OSC_IN pin | IINJ(PIN) | -5 | | 5 | mA | | 40 |
| Sum of injection currents, other pins | ΣIINJ(PIN) | -25 | | 25 | mA | | 40 |
| HSI oscillator accuracy | ACCHSI | -2.5 | | 2.5 | % | TA = -40℃ to 105℃ | 52 |
| HSI oscillator accuracy at 25℃ | ACCHSI | -1 | | 1 | % | TA = 25℃ | 52 |
| HSE oscillator frequency | fOSC_IN | 4 | 8 | 12 | MHz | 2V<VDD<3.6V | 49 |
| HSE oscillator frequency | fOSC_IN | 8 | 16 | 24 | MHz | 3.0V<VDD<5.5V | 49 |
| Input low-level voltage, 3.3V CMOS port | VIL | | | 1.47 | V | 3.3V CMOS port | 55 |
| Input low-level voltage, 5V CMOS port | VIL | | | 2.26 | V | 5V CMOS port | 55 |
| Input high-level voltage, 3.3V CMOS port | VIH | 1.74 | | | V | 3.3V CMOS port | 55 |
| Input high-level voltage, 5V CMOS port | VIH | 2.61 | | | V | 5V CMOS port | 55 |
| Input leakage current, 3.3V | Ilkg | | | 1 | μA | 3.3V | 55 |
| Weak pull-up equivalent resistance, 3.3V | RPU | | 50 | | kΩ | 3.3V VIN = VSS | 55 |
| I/O pin capacitance | CIO | | | 10 | pF | | 55 |
| NRST input low-level voltage | VIL(NRST) | | | 1.47 | V | VDD=3.3V | 57 |
| NRST input high-level voltage | VIH(NRST) | 1.74 | | | V | VDD=3.3V | 57 |
## CAD (KiCad official)
- Symbol: `MM32F0273D8P`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `mm32f0273d8p-etched.step` / `mm32f0273d8p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mm32f0273d8p.step` / `mm32f0273d8p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MindMotion Microelectronics datasheet](docs/mm32f0273d8p-datasheet.pdf) (79 pp, sha256 `07aeeaed73ce07b5`, retrieved 2026-11-02, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mm32f0273d8p-datasheet.pdf)