3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX92352LSE-BAA-000-SP
Melexis · Hall Sensor · TSOT-5
MLX92352LSE-BAA-000-SP from Melexis, in a TSOT-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Open-drain output 2, rated up to 30 mA output current and 70 V output voltage (absolute maximum), with 0.4 V max saturation voltage at IOL = 10 mA. |
| 2 | OUT1 | output | Open-drain output 1, rated up to 30 mA output current and 70 V output voltage (absolute maximum), with 0.4 V max saturation voltage at IOL = 10 mA. |
| 3 | VDD | power_in | Power supply pin for operation from 2.7 V to 60 V (70 V absolute maximum for 1 hour), with reverse supply protection. |
| 4 | GND | power_in | Ground pin, which must be connected together with pin 5. |
| 5 | GND | power_in | Ground pin, which must be connected together with pin 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSOT-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 70 | V | For maximum 1 hour | 5 | ||
| Reverse supply voltage | VDDREV | -40 | V | For maximum 1 hour | 5 | ||
| Output voltage | VOUT | 70 | V | For maximum 1 hour | 5 | ||
| Reverse output voltage | VOUTREV | -0.5 | V | 5 | |||
| Output current | IOUT | 30 | mA | 5 | |||
| Reverse output current | IOUTREV | -50 | mA | 5 | |||
| Maximum junction temperature | TJ | 175 | °C | Guaranteed by 1000 hours HTOL | 5 | ||
| ESD HBM | 15 | kV | AEC-Q100-002 | 5 | |||
| ESD CDM | 1 | kV | AEC-Q100-011 | 5 | |||
| ESD System | 8 | kV | Unpowered contact discharge (150pF/330Ω), ISO10605 | 5 | |||
| Operating supply voltage | VDD | 2.7 | 60 | V | TA = -40°C to 150°C | 6 | |
| Ambient operating temperature | TA | -40 | 150 | °C | Temperature code L | 6 | |
| Brownout reset threshold | VBOR | 2.6 | V | 6 | |||
| Brownout duration | tBO | 1.4 | s | 6 | |||
| Under Voltage Reset threshold | VUVR | 2.1 | V | 6 | |||
| Under Voltage Reset reaction time | tUVR | 1 | µs | VDD drop to 1.5V | 6 | ||
| Output leakage | IOFF | 1 | µA | VOUT = 12V | 6 | ||
| Output leakage | IOFF | 10 | µA | VOUT = 60V | 6 | ||
| Output saturation voltage | VOL | 0.15 | 0.4 | V | IOL = 10mA | 6 | |
| Output saturation voltage | VOL | 0.3 | 0.8 | V | IOL = 20mA | 6 | |
| Output resistance | ROL | 15 | 40 | Ω | IOL = 20mA | 6 | |
| Output rise time | tR | 0.3 | 0.5 | 1 | µs | RPU = 4.7kΩ, VDD = 12V, VPU = 5V, CLOAD = 50pF | 6 |
| Output fall time | tF | 0.2 | 0.4 | 1 | µs | RPU = 4.7kΩ, VDD = 12V, VPU = 5V, CLOAD = 50pF | 6 |
| Power-On time | tON | 75 | 110 | µs | VDD = 5V, ΔVDD/Δt ≥ 2V/µs, dual axis configuration | 6 | |
| Power-On time | tON | 60 | 95 | µs | VDD = 5V, ΔVDD/Δt ≥ 2V/µs, single axis configuration | 6 | |
| Power-On time | tON | 50 | 75 | µs | VDD = 5V, ΔVDD/Δt ≥ 2V/µs, single axis configuration with Fast Start-Up enabled | 6 | |
| Maximum switching frequency | FSW_MAX | 37 | 42 | kHz | Triangular magnetic field with BPEAK≥10xBOP; single axis, magnetic latch | 7 | |
| Maximum switching frequency | FSW_MAX | 21 | 24 | kHz | Triangular magnetic field with BPEAK≥10xBOP; dual axis, magnetic latch | 7 | |
| Propagation delay | tPD | 18 | µs | Triangular magnetic field with BPEAK≥10xBOP, FB=10kHz; single axis, magnetic latch | 7 | ||
| Propagation delay | tPD | 25 | µs | Triangular magnetic field with BPEAK≥10xBOP, FB=10kHz; dual axis, magnetic latch | 7 | ||
| Output jitter (p-p) | tJITTER | 9 | µs | Triangular magnetic field with BPEAK≥10xBOP, FB=10kHz; single axis, magnetic latch | 7 | ||
| Output jitter (p-p) | tJITTER | 22 | µs | Triangular magnetic field with BPEAK≥10xBOP, FB=10kHz; dual axis, magnetic latch | 7 | ||
| Start-up feedback High-level input voltage | VSFB_IH | 1.4 | V | 7 | |||
| Start-up feedback Low-level input voltage | VSFB_IL | 0.8 | V | 7 | |||
| Supply current | IDD | 1.9 | 2.4 | mA | 7 | ||
| Supply current in Thermal Protection | IDD_TPROT | 0.43 | 0.75 | mA | 7 | ||
| Reverse supply current | IDDREV | -1 | mA | VDD = -30V | 7 | ||
| Thermal Protection threshold | TPROT | 200 | °C | 7 | |||
| SE package thermal resistance | RTHJA | 300 | °C/W | Single layer PCB, JEDEC standard test boards, still air (LFPM=0) | 7 | ||
| Operating point Output 1 | BOP_OUT1 | 0.7 | 2 | 3.3 | mT | TA = -40°C | 8 |
| Operating point Output 1 | BOP_OUT1 | 1.1 | 2 | 2.9 | mT | TA = 25°C | 8 |
| Release point Output 1 | BRP_OUT1 | -3.3 | -2 | -0.7 | mT | TA = -40°C | 8 |
| Release point Output 1 | BRP_OUT1 | -2.9 | -2 | -1.1 | mT | TA = 25°C | 8 |
| Operating point Output 2 | BOP_OUT2 | -3.3 | -2 | -0.7 | mT | TA = -40°C | 8 |
| Operating point Output 2 | BOP_OUT2 | -2.9 | -2 | -1.1 | mT | TA = 25°C | 8 |
| Release point Output 2 | BRP_OUT2 | 0.7 | 2 | 3.3 | mT | TA = -40°C | 8 |
| Release point Output 2 | BRP_OUT2 | 1.1 | 2 | 2.9 | mT | TA = 25°C | 8 |
| Temperature coefficient | TC | 0 | ppm/°C | 8 |
CAD (KiCad official)
- Symbol:
MLX92352LSE-BAA-000-SP - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-5 (KiCad packages3D, STEP)
- 3D model files:
mlx92352lse-baa-000-sp-etched.step/mlx92352lse-baa-000-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx92352lse-baa-000-sp.step/mlx92352lse-baa-000-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (25 pp, sha256
2c5bd25bc0aa52ac, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).