← Commit history

Publish 0.1.2

Ray ·92285b44a9 · ·parent ba2ccb9
3 files changed +54−60
README.md+11−17
@@ -2,20 +2,20 @@  **Melexis** · Current Sensors · SOIC-8 -MLX91218LDC-ARX-500-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+MLX91218LDC-ARX-500-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VREF | power_in | Reference voltage pin; the datasheet gives no direction or limits for this pin, and Section 14.1 covers a resistance on it. |-| 2 | OUT | output | Analog output voltage carrying the measurement, ratiometric or fixed (Vref) depending on the option code. |-| 3 | GND | power_in | Ground voltage; the absolute maximum reverse pin voltage is GND-0.3 V, and the datasheet notes that VDD and GND are the only pins excepted from the reverse-voltage rating. |-| 4 | VDD | power_in | Supply voltage, with an overvoltage absolute maximum of +8 V and a negative supply absolute maximum of -0.3 V; the part is factory-selectable for 5 V or 3.3 V operation. |-| 5 | NC | unconnected | Not connected; the datasheet recommends connecting unused NC pins to ground for optimal EMC results. |-| 6 | OCD_EXT | output | Overcurrent detection output based on the external threshold; the marking drawing states this pin must be 1 (MUST 1). |-| 7 | OCD_INT | output | Overcurrent detection output based on the internal threshold. |-| 8 | VOC_EXT | input | External threshold input for the overcurrent detection; the marking drawing states this pin must be 0 (MUST 0). |+| 1 | VREF | power_in | Reference voltage output; the resistance connected to this pin must be large enough (normally above about 200 kΩ) to limit the current so the measured VREF stays correct. |+| 2 | OUT | output | Analog sensor output (VOUT) proportional to the magnetic flux density, with output resistance of 1 to 5 Ω at ILOAD = 10 mA and a capacitive load of 0 to 4.7 nF (6 nF maximum). |+| 3 | GND | power_in | Ground supply pin for the sensor and reference, which is also the reference for the OCD outputs. |+| 4 | VDD | power_in | Supply voltage of 4.5 V to 5.5 V for 5xx versions or 3.135 V to 3.465 V for 3xx versions, with an absolute overvoltage limit of +8 V. |+| 5 | NC | unconnected | Not connected; for optimal EMC results the datasheet recommends connecting this unused pin to ground. |+| 6 | OCD_EXT | output | Overcurrent detection output based on the external threshold set by the VOC_EXT voltage divider; it is pulled to ground on detection and held for a 10 µs dwell time. |+| 7 | OCD_INT | output | Overcurrent detection output based on the internal EEPROM threshold; it is pulled to ground on detection and held for a 7 to 14 µs dwell time. |+| 8 | VOC_EXT | input | External overcurrent threshold input whose voltage sets the OCD_EXT threshold, with a range of 0.5 V to 2.0 V (bidirectional) or 0.9 V to 4.5 V (unidirectional) at VDD = 5 V. |  ## Key specifications @@ -32,13 +32,6 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Nominal Supply Voltage (MLX91218LDC-Axx-5xx) | VDD | 4.5 | 5 | 5.5 | V | TA = -40 to 150°C, VDD=5V family | 10 |-| Positive Supply Voltage (maintaining application mode) | VDD |  |  | 6.5 | V |  | 10 |-| Supply Current | IDD |  | 15.5 | 19 | mA | Without RLOAD on output, in application mode; VDD=5V | 10 |-| Output Resistance | ROUT |  | 1 | 5 | Ω | VOUT = 50%VDD, ILOAD = 10mA | 10 |-| Output Capacitive Load | CLOAD | 0 | 4.7 | 6 | nF | Output amplifier stability is optimized for this typical value | 10 |-| Output Leakage current | ILEAK |  | 6 | 20 | µA | High impedance mode, TA=150°C | 10 |-| Output Voltage Linear Swing | VOUT_LSW | 10 |  | 90 | %VDD | Pull-down or pull-up ≥ 10 kΩ | 10 | | Positive Supply Voltage (overvoltage) | VDD |  |  | 8 | V |  | 9 | | Negative Supply Voltage | VDD | -0.3 |  |  | V |  | 9 | | Output Sink Current | Iout_max |  |  | 50 | mA |  | 9 |@@ -52,6 +45,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Human Body ESD Protection | ESDHBM |  |  | 2 | kV |  | 9 | | Charged Device Model ESD Protection, all pins | ESDCDM |  |  | 500 | V | All pins | 9 | | Charged Device Model ESD Protection, corner pins | ESDCDM |  |  | 750 | V | Corner pins | 9 |+| Nominal Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | MLX91218LDC-Axx-5xx | 10 |  ## CAD (KiCad official) @@ -64,7 +58,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Melexis datasheet](docs/mlx91218ldc-arx-500-sp-datasheet.pdf) (28 pp, sha256 `8c447f793574dff0`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [Melexis datasheet](docs/mlx91218ldc-arx-500-sp-datasheet.pdf) (28 pp, sha256 `8c447f793574dff0`, retrieved 2026-11-13, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+20−21
@@ -1,6 +1,6 @@ {   "slug": "mlx91218ldc-arx-500-sp",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Melexis Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "mlx91218ldc-arx-500-sp-hero.glb",-    "mlx91218ldc-arx-500-sp-hero.overlay.json",-    "mlx91218ldc-arx-500-sp-etched.glb"+    "mlx91218ldc-arx-500-sp-hero.overlay.json"   ],   "component": {     "mpn": "MLX91218LDC-ARX-500-SP",@@ -43,7 +42,7 @@       "symbol": "mlx91218ldc-arx-500-sp.kicad_sym",       "footprint": "mlx91218ldc-arx-500-sp.kicad_mod",       "model_3d": "mlx91218ldc-arx-500-sp-hero.glb",-      "model_3d_plain": "mlx91218ldc-arx-500-sp-etched.glb",+      "model_3d_plain": "mlx91218ldc-arx-500-sp.glb",       "model_3d_step": "mlx91218ldc-arx-500-sp-etched.step",       "model_3d_step_plain": "mlx91218ldc-arx-500-sp.step",       "lbr": "mlx91218ldc-arx-500-sp.lbr"@@ -54,7 +53,7 @@       "mouser": "482-91218LDCARX500SP"     },     "distributor_check": {-      "checked_at": "2026-11-12T07:56:50Z",+      "checked_at": "2026-11-13T01:08:50Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "413-MLX91218LDC-ARX-500-SP-ND",@@ -70,49 +69,49 @@         "number": "1",         "name": "VREF",         "type": "power_in",-        "description": "Reference voltage pin; the datasheet gives no direction or limits for this pin, and Section 14.1 covers a resistance on it."+        "description": "Reference voltage output; the resistance connected to this pin must be large enough (normally above about 200 kΩ) to limit the current so the measured VREF stays correct."       },       {         "number": "2",         "name": "OUT",         "type": "output",-        "description": "Analog output voltage carrying the measurement, ratiometric or fixed (Vref) depending on the option code."+        "description": "Analog sensor output (VOUT) proportional to the magnetic flux density, with output resistance of 1 to 5 Ω at ILOAD = 10 mA and a capacitive load of 0 to 4.7 nF (6 nF maximum)."       },       {         "number": "3",         "name": "GND",         "type": "power_in",-        "description": "Ground voltage; the absolute maximum reverse pin voltage is GND-0.3 V, and the datasheet notes that VDD and GND are the only pins excepted from the reverse-voltage rating."+        "description": "Ground supply pin for the sensor and reference, which is also the reference for the OCD outputs."       },       {         "number": "4",         "name": "VDD",         "type": "power_in",-        "description": "Supply voltage, with an overvoltage absolute maximum of +8 V and a negative supply absolute maximum of -0.3 V; the part is factory-selectable for 5 V or 3.3 V operation."+        "description": "Supply voltage of 4.5 V to 5.5 V for 5xx versions or 3.135 V to 3.465 V for 3xx versions, with an absolute overvoltage limit of +8 V."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "Not connected; the datasheet recommends connecting unused NC pins to ground for optimal EMC results."+        "description": "Not connected; for optimal EMC results the datasheet recommends connecting this unused pin to ground."       },       {         "number": "6",         "name": "OCD_EXT",         "type": "output",-        "description": "Overcurrent detection output based on the external threshold; the marking drawing states this pin must be 1 (MUST 1)."+        "description": "Overcurrent detection output based on the external threshold set by the VOC_EXT voltage divider; it is pulled to ground on detection and held for a 10 µs dwell time."       },       {         "number": "7",         "name": "OCD_INT",         "type": "output",-        "description": "Overcurrent detection output based on the internal threshold."+        "description": "Overcurrent detection output based on the internal EEPROM threshold; it is pulled to ground on detection and held for a 7 to 14 µs dwell time."       },       {         "number": "8",         "name": "VOC_EXT",         "type": "input",-        "description": "External threshold input for the overcurrent detection; the marking drawing states this pin must be 0 (MUST 0)."+        "description": "External overcurrent threshold input whose voltage sets the OCD_EXT threshold, with a range of 0.5 V to 2.0 V (bidirectional) or 0.9 V to 4.5 V (unidirectional) at VDD = 5 V."       }     ],     "provenance": {@@ -126,11 +125,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The ordering table (Table 1) lists ARX-501, ARX-300 and ARX-301 but not ARX-500, so the requested ML; The datasheet gives only 'Analog' for VREF with no input/output direction, so the KiCad type 'passiv; The MUST 0 / MUST 1 constraints on VOC_EXT and OCD_EXT come from the marking drawing on page 25, not"+          "extractor flagged: The requested MPN MLX91218LDC-ARX-500-SP does not appear in the ordering table (Table 1/2) or the OC; Figure 12 text labels for the pin layout (VOC_EXT marked 'MUST 0', OCD_EXT marked 'MUST 1', NC and p; The VDD range given in the description for pin 4 is taken from the General Electrical Specifications"         ],-        "pages_sent": 10,-        "cost_usd": 0.04,-        "at": "2026-11-12T07:56:16"+        "pages_sent": 28,+        "cost_usd": 0.1017,+        "at": "2026-11-13T01:08:36"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/95ee81cbc5ce4bdfc7d55f494bcc35df.pdf",@@ -167,7 +166,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -185,13 +184,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "6637bf6d3da1ecc037d7270a0885773473f80139fdeacb16697e0b3f68d437dc",-        "checked": "2026-11-12",+        "sha256": "ea3062fcbbd841ff6b4d7f3bfddd26a87231b86061d5113a33f79ef419fa8bbe",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DC (SOIC8)",+      "package_code": "DC",       "source_page": 24,       "D": {         "nom_mm": 4.89,
page.json+23−22
@@ -4,7 +4,7 @@   "slug": "mlx91218ldc-arx-500-sp",   "title": "MLX91218LDC-ARX-500-SP",   "brief": "Melexis Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "mlx91218ldc-arx-500-sp.kicad_sym",       "footprint": "mlx91218ldc-arx-500-sp.kicad_mod",       "model_3d": "mlx91218ldc-arx-500-sp-hero.glb",-      "model_3d_plain": "mlx91218ldc-arx-500-sp-etched.glb",+      "model_3d_plain": "mlx91218ldc-arx-500-sp.glb",       "model_3d_step": "mlx91218ldc-arx-500-sp-etched.step",       "model_3d_step_plain": "mlx91218ldc-arx-500-sp.step",       "lbr": "mlx91218ldc-arx-500-sp.lbr"@@ -36,7 +36,7 @@       "mouser": "482-91218LDCARX500SP"     },     "distributor_check": {-      "checked_at": "2026-11-12T07:56:50Z",+      "checked_at": "2026-11-13T01:08:50Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "413-MLX91218LDC-ARX-500-SP-ND",@@ -52,49 +52,49 @@         "number": "1",         "name": "VREF",         "type": "power_in",-        "description": "Reference voltage pin; the datasheet gives no direction or limits for this pin, and Section 14.1 covers a resistance on it."+        "description": "Reference voltage output; the resistance connected to this pin must be large enough (normally above about 200 kΩ) to limit the current so the measured VREF stays correct."       },       {         "number": "2",         "name": "OUT",         "type": "output",-        "description": "Analog output voltage carrying the measurement, ratiometric or fixed (Vref) depending on the option code."+        "description": "Analog sensor output (VOUT) proportional to the magnetic flux density, with output resistance of 1 to 5 Ω at ILOAD = 10 mA and a capacitive load of 0 to 4.7 nF (6 nF maximum)."       },       {         "number": "3",         "name": "GND",         "type": "power_in",-        "description": "Ground voltage; the absolute maximum reverse pin voltage is GND-0.3 V, and the datasheet notes that VDD and GND are the only pins excepted from the reverse-voltage rating."+        "description": "Ground supply pin for the sensor and reference, which is also the reference for the OCD outputs."       },       {         "number": "4",         "name": "VDD",         "type": "power_in",-        "description": "Supply voltage, with an overvoltage absolute maximum of +8 V and a negative supply absolute maximum of -0.3 V; the part is factory-selectable for 5 V or 3.3 V operation."+        "description": "Supply voltage of 4.5 V to 5.5 V for 5xx versions or 3.135 V to 3.465 V for 3xx versions, with an absolute overvoltage limit of +8 V."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "Not connected; the datasheet recommends connecting unused NC pins to ground for optimal EMC results."+        "description": "Not connected; for optimal EMC results the datasheet recommends connecting this unused pin to ground."       },       {         "number": "6",         "name": "OCD_EXT",         "type": "output",-        "description": "Overcurrent detection output based on the external threshold; the marking drawing states this pin must be 1 (MUST 1)."+        "description": "Overcurrent detection output based on the external threshold set by the VOC_EXT voltage divider; it is pulled to ground on detection and held for a 10 µs dwell time."       },       {         "number": "7",         "name": "OCD_INT",         "type": "output",-        "description": "Overcurrent detection output based on the internal threshold."+        "description": "Overcurrent detection output based on the internal EEPROM threshold; it is pulled to ground on detection and held for a 7 to 14 µs dwell time."       },       {         "number": "8",         "name": "VOC_EXT",         "type": "input",-        "description": "External threshold input for the overcurrent detection; the marking drawing states this pin must be 0 (MUST 0)."+        "description": "External overcurrent threshold input whose voltage sets the OCD_EXT threshold, with a range of 0.5 V to 2.0 V (bidirectional) or 0.9 V to 4.5 V (unidirectional) at VDD = 5 V."       }     ],     "provenance": {@@ -108,11 +108,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The ordering table (Table 1) lists ARX-501, ARX-300 and ARX-301 but not ARX-500, so the requested ML; The datasheet gives only 'Analog' for VREF with no input/output direction, so the KiCad type 'passiv; The MUST 0 / MUST 1 constraints on VOC_EXT and OCD_EXT come from the marking drawing on page 25, not"+          "extractor flagged: The requested MPN MLX91218LDC-ARX-500-SP does not appear in the ordering table (Table 1/2) or the OC; Figure 12 text labels for the pin layout (VOC_EXT marked 'MUST 0', OCD_EXT marked 'MUST 1', NC and p; The VDD range given in the description for pin 4 is taken from the General Electrical Specifications"         ],-        "pages_sent": 10,-        "cost_usd": 0.04,-        "at": "2026-11-12T07:56:16"+        "pages_sent": 28,+        "cost_usd": 0.1017,+        "at": "2026-11-13T01:08:36"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/95ee81cbc5ce4bdfc7d55f494bcc35df.pdf",@@ -149,7 +149,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -167,13 +167,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "6637bf6d3da1ecc037d7270a0885773473f80139fdeacb16697e0b3f68d437dc",-        "checked": "2026-11-12",+        "sha256": "ea3062fcbbd841ff6b4d7f3bfddd26a87231b86061d5113a33f79ef419fa8bbe",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DC (SOIC8)",+      "package_code": "DC",       "source_page": 24,       "D": {         "nom_mm": 4.89,@@ -510,10 +510,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "mlx91218ldc-arx-500-sp-hero.glb",-    "mlx91218ldc-arx-500-sp-hero.overlay.json",-    "mlx91218ldc-arx-500-sp-etched.glb"+    "mlx91218ldc-arx-500-sp-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Melexis Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file