← Commit history

Publish 0.1.1

Ray ·29f8c75ec9 · ·parent 8b2ba53
4 files changed +307−301
README.md+13−14
@@ -8,14 +8,14 @@ MLX91218LDC-ARX-500-SP from Melexis, in a SOIC-8. Pinout and pin descriptions ex  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VREF | power_in | Analog reference voltage pin; the datasheet lists it as an analog reference voltage (fixed output mode variants specify a reference voltage, NA for ratiometric variants). |-| 2 | OUT | output | Analog output voltage proportional to the measured magnetic flux density (measurement output). |-| 3 | GND | power_in | Supply ground voltage. |-| 4 | VDD | power_in | Supply voltage pin (absolute maximum +8 V, -0.3 V negative). |-| 5 | NC | unconnected | Not connected; connecting unused NC pins to ground is recommended for optimal EMC results. |-| 6 | OCD_EXT | output | Analog output for overcurrent detection based on the external threshold (marked MUST 1 in the pinout figure). |-| 7 | OCD_INT | output | Analog output for overcurrent detection based on the internal threshold. |-| 8 | VOC_EXT | input | Analog input setting the external threshold for the overcurrent detection (marked MUST 0 in the pinout figure). |+| 1 | VREF | power_in | Reference voltage pin; the datasheet gives no direction or limits for this pin, and Section 14.1 covers a resistance on it. |+| 2 | OUT | output | Analog output voltage carrying the measurement, ratiometric or fixed (Vref) depending on the option code. |+| 3 | GND | power_in | Ground voltage; the absolute maximum reverse pin voltage is GND-0.3 V, and the datasheet notes that VDD and GND are the only pins excepted from the reverse-voltage rating. |+| 4 | VDD | power_in | Supply voltage, with an overvoltage absolute maximum of +8 V and a negative supply absolute maximum of -0.3 V; the part is factory-selectable for 5 V or 3.3 V operation. |+| 5 | NC | unconnected | Not connected; the datasheet recommends connecting unused NC pins to ground for optimal EMC results. |+| 6 | OCD_EXT | output | Overcurrent detection output based on the external threshold; the marking drawing states this pin must be 1 (MUST 1). |+| 7 | OCD_INT | output | Overcurrent detection output based on the internal threshold. |+| 8 | VOC_EXT | input | External threshold input for the overcurrent detection; the marking drawing states this pin must be 0 (MUST 0). |  ## Key specifications @@ -32,14 +32,13 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Nominal Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | MLX91218LDC-Axx-5xx | 10 |+| Nominal Supply Voltage (MLX91218LDC-Axx-5xx) | VDD | 4.5 | 5 | 5.5 | V | TA = -40 to 150°C, VDD=5V family | 10 | | Positive Supply Voltage (maintaining application mode) | VDD |  |  | 6.5 | V |  | 10 |-| Supply Current | IDD |  | 15.5 | 19 | mA | Without RLOAD on output, in application mode, VDD=5V | 10 |+| Supply Current | IDD |  | 15.5 | 19 | mA | Without RLOAD on output, in application mode; VDD=5V | 10 | | Output Resistance | ROUT |  | 1 | 5 | Ω | VOUT = 50%VDD, ILOAD = 10mA | 10 |-| Voltage Reference Output Resistance | RREF | 120 | 200 | 333 | Ω | VREF=2.5V : ISINK =5mA; VREF=1.65V or VREF=1.5V : ISINK =3mA; VREF=0.5V : ISINK =1mA; ISOURCE = 0.2mA | 10 | | Output Capacitive Load | CLOAD | 0 | 4.7 | 6 | nF | Output amplifier stability is optimized for this typical value | 10 | | Output Leakage current | ILEAK |  | 6 | 20 | µA | High impedance mode, TA=150°C | 10 |-| Output Voltage Linear Swing | VOUT_LSW | 10 |  | 90 | %VDD | Pull-down or pull-up ≥ 10 kΩ; VDD > 4.6 V for Fixed Mode versions | 10 |+| Output Voltage Linear Swing | VOUT_LSW | 10 |  | 90 | %VDD | Pull-down or pull-up ≥ 10 kΩ | 10 | | Positive Supply Voltage (overvoltage) | VDD |  |  | 8 | V |  | 9 | | Negative Supply Voltage | VDD | -0.3 |  |  | V |  | 9 | | Output Sink Current | Iout_max |  |  | 50 | mA |  | 9 |@@ -49,7 +48,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Maximum Junction Temperature | Tj_MAX |  |  | 165 | °C |  | 9 | | Operating Ambient Temperature Range | TA | -40 |  | 150 | °C |  | 9 | | Storage Temperature Range | TS | -55 |  | 165 | °C |  | 9 |-| Magnetic Flux Density | BMAX | -3 |  | 3 | T | ±3 T | 9 |+| Magnetic Flux Density | BMAX | -3 |  | 3 | T |  | 9 | | Human Body ESD Protection | ESDHBM |  |  | 2 | kV |  | 9 | | Charged Device Model ESD Protection, all pins | ESDCDM |  |  | 500 | V | All pins | 9 | | Charged Device Model ESD Protection, corner pins | ESDCDM |  |  | 750 | V | Corner pins | 9 |@@ -66,7 +65,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [Melexis datasheet](docs/mlx91218ldc-arx-500-sp-datasheet.pdf) (28 pp, sha256 `8c447f793574dff0`, retrieved 2026-11-12, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/mlx91218ldc-arx-500-sp-datasheet.pdf)
mlx91218ldc-arx-500-sp-hero.overlay.json+261−256
@@ -1,260 +1,265 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "MLX91218LDC-ARX-500-SP",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 8,-      "span_mm": 6.9,-      "dash_mm": 0.1725,-      "gap_mm": 0.1035,-      "pad_stroke_mm": 0.0414-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 8,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "MLX91218LDC-ARX-500-SP",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 6.9,+   "dash_mm": 0.1725,+   "gap_mm": 0.1035,+   "pad_stroke_mm": 0.0414   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.552,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -2.11,-      2.11-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -2.205,-      2.205-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "mlx91218ldc-arx-500-sp-etched.glb",-    "glb_sha256": "22e94d156ec1f5e8e7597f87296ba04a18e2954b8a17d55361a3fa3f2977717e",-    "footprint": "mlx91218ldc-arx-500-sp.kicad_mod",-    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",-    "pins": "page.json component.pins",-    "pins_sha256": "fa1d67a68b6dc6279bd1c7ab75e28cadbc101aaf9079dab61d84e0e9b7839180"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "VREF",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "OUT",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "GND",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "VDD",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "NC",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "OCD_EXT",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "OCD_INT",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "VOC_EXT",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.552,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -2.11,+   2.11+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -2.205,+   2.205   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "mlx91218ldc-arx-500-sp-etched.glb",+  "glb_sha256": "22e94d156ec1f5e8e7597f87296ba04a18e2954b8a17d55361a3fa3f2977717e",+  "footprint": "mlx91218ldc-arx-500-sp.kicad_mod",+  "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+  "pins": "page.json component.pins",+  "pins_sha256": "fa1d67a68b6dc6279bd1c7ab75e28cadbc101aaf9079dab61d84e0e9b7839180"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VREF",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "OUT",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "GND",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "VDD",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "NC",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "OCD_EXT",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "OCD_INT",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "VOC_EXT",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
package.json+15−15
@@ -1,6 +1,6 @@ {   "slug": "mlx91218ldc-arx-500-sp",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Melexis Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,7 +54,7 @@       "mouser": "482-91218LDCARX500SP"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:57:10Z",+      "checked_at": "2026-11-12T07:56:50Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "413-MLX91218LDC-ARX-500-SP-ND",@@ -70,49 +70,49 @@         "number": "1",         "name": "VREF",         "type": "power_in",-        "description": "Analog reference voltage pin; the datasheet lists it as an analog reference voltage (fixed output mode variants specify a reference voltage, NA for ratiometric variants)."+        "description": "Reference voltage pin; the datasheet gives no direction or limits for this pin, and Section 14.1 covers a resistance on it."       },       {         "number": "2",         "name": "OUT",         "type": "output",-        "description": "Analog output voltage proportional to the measured magnetic flux density (measurement output)."+        "description": "Analog output voltage carrying the measurement, ratiometric or fixed (Vref) depending on the option code."       },       {         "number": "3",         "name": "GND",         "type": "power_in",-        "description": "Supply ground voltage."+        "description": "Ground voltage; the absolute maximum reverse pin voltage is GND-0.3 V, and the datasheet notes that VDD and GND are the only pins excepted from the reverse-voltage rating."       },       {         "number": "4",         "name": "VDD",         "type": "power_in",-        "description": "Supply voltage pin (absolute maximum +8 V, -0.3 V negative)."+        "description": "Supply voltage, with an overvoltage absolute maximum of +8 V and a negative supply absolute maximum of -0.3 V; the part is factory-selectable for 5 V or 3.3 V operation."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "Not connected; connecting unused NC pins to ground is recommended for optimal EMC results."+        "description": "Not connected; the datasheet recommends connecting unused NC pins to ground for optimal EMC results."       },       {         "number": "6",         "name": "OCD_EXT",         "type": "output",-        "description": "Analog output for overcurrent detection based on the external threshold (marked MUST 1 in the pinout figure)."+        "description": "Overcurrent detection output based on the external threshold; the marking drawing states this pin must be 1 (MUST 1)."       },       {         "number": "7",         "name": "OCD_INT",         "type": "output",-        "description": "Analog output for overcurrent detection based on the internal threshold."+        "description": "Overcurrent detection output based on the internal threshold."       },       {         "number": "8",         "name": "VOC_EXT",         "type": "input",-        "description": "Analog input setting the external threshold for the overcurrent detection (marked MUST 0 in the pinout figure)."+        "description": "External threshold input for the overcurrent detection; the marking drawing states this pin must be 0 (MUST 0)."       }     ],     "provenance": {@@ -120,17 +120,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Datasheet pin table lists VREF only as 'Analog Reference voltage' with no explicit direction; classi; The pinout figure annotates VOC_EXT '(MUST 0)' and OCD_EXT '(MUST 1)', which is ambiguous in the ext; The MPN suffix -500-SP denotes a sample pack of the ARX-500 option; the ordering table (Table 1) on "+          "extractor flagged: The ordering table (Table 1) lists ARX-501, ARX-300 and ARX-301 but not ARX-500, so the requested ML; The datasheet gives only 'Analog' for VREF with no input/output direction, so the KiCad type 'passiv; The MUST 0 / MUST 1 constraints on VOC_EXT and OCD_EXT come from the marking drawing on page 25, not"         ],         "pages_sent": 10,-        "cost_usd": 0.0691,-        "at": "2026-11-12T04:56:58"+        "cost_usd": 0.04,+        "at": "2026-11-12T07:56:16"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/95ee81cbc5ce4bdfc7d55f494bcc35df.pdf",@@ -185,7 +185,7 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "4c3025eb5c0279970c927dcdca5227de65fbadf003156c81080d1857f29415df",+        "sha256": "6637bf6d3da1ecc037d7270a0885773473f80139fdeacb16697e0b3f68d437dc",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+18−16
@@ -4,7 +4,7 @@   "slug": "mlx91218ldc-arx-500-sp",   "title": "MLX91218LDC-ARX-500-SP",   "brief": "Melexis Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "482-91218LDCARX500SP"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:57:10Z",+      "checked_at": "2026-11-12T07:56:50Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "413-MLX91218LDC-ARX-500-SP-ND",@@ -52,49 +52,49 @@         "number": "1",         "name": "VREF",         "type": "power_in",-        "description": "Analog reference voltage pin; the datasheet lists it as an analog reference voltage (fixed output mode variants specify a reference voltage, NA for ratiometric variants)."+        "description": "Reference voltage pin; the datasheet gives no direction or limits for this pin, and Section 14.1 covers a resistance on it."       },       {         "number": "2",         "name": "OUT",         "type": "output",-        "description": "Analog output voltage proportional to the measured magnetic flux density (measurement output)."+        "description": "Analog output voltage carrying the measurement, ratiometric or fixed (Vref) depending on the option code."       },       {         "number": "3",         "name": "GND",         "type": "power_in",-        "description": "Supply ground voltage."+        "description": "Ground voltage; the absolute maximum reverse pin voltage is GND-0.3 V, and the datasheet notes that VDD and GND are the only pins excepted from the reverse-voltage rating."       },       {         "number": "4",         "name": "VDD",         "type": "power_in",-        "description": "Supply voltage pin (absolute maximum +8 V, -0.3 V negative)."+        "description": "Supply voltage, with an overvoltage absolute maximum of +8 V and a negative supply absolute maximum of -0.3 V; the part is factory-selectable for 5 V or 3.3 V operation."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "Not connected; connecting unused NC pins to ground is recommended for optimal EMC results."+        "description": "Not connected; the datasheet recommends connecting unused NC pins to ground for optimal EMC results."       },       {         "number": "6",         "name": "OCD_EXT",         "type": "output",-        "description": "Analog output for overcurrent detection based on the external threshold (marked MUST 1 in the pinout figure)."+        "description": "Overcurrent detection output based on the external threshold; the marking drawing states this pin must be 1 (MUST 1)."       },       {         "number": "7",         "name": "OCD_INT",         "type": "output",-        "description": "Analog output for overcurrent detection based on the internal threshold."+        "description": "Overcurrent detection output based on the internal threshold."       },       {         "number": "8",         "name": "VOC_EXT",         "type": "input",-        "description": "Analog input setting the external threshold for the overcurrent detection (marked MUST 0 in the pinout figure)."+        "description": "External threshold input for the overcurrent detection; the marking drawing states this pin must be 0 (MUST 0)."       }     ],     "provenance": {@@ -102,17 +102,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Datasheet pin table lists VREF only as 'Analog Reference voltage' with no explicit direction; classi; The pinout figure annotates VOC_EXT '(MUST 0)' and OCD_EXT '(MUST 1)', which is ambiguous in the ext; The MPN suffix -500-SP denotes a sample pack of the ARX-500 option; the ordering table (Table 1) on "+          "extractor flagged: The ordering table (Table 1) lists ARX-501, ARX-300 and ARX-301 but not ARX-500, so the requested ML; The datasheet gives only 'Analog' for VREF with no input/output direction, so the KiCad type 'passiv; The MUST 0 / MUST 1 constraints on VOC_EXT and OCD_EXT come from the marking drawing on page 25, not"         ],         "pages_sent": 10,-        "cost_usd": 0.0691,-        "at": "2026-11-12T04:56:58"+        "cost_usd": 0.04,+        "at": "2026-11-12T07:56:16"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/95ee81cbc5ce4bdfc7d55f494bcc35df.pdf",@@ -167,7 +167,7 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "4c3025eb5c0279970c927dcdca5227de65fbadf003156c81080d1857f29415df",+        "sha256": "6637bf6d3da1ecc037d7270a0885773473f80139fdeacb16697e0b3f68d437dc",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -527,5 +527,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Melexis Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file