Generated by kicad-footprint-generator · KiCad file format 20260206
MLX91208LDC-CAV-000-RE
Melexis · Current Sensors · SOIC-8
MLX91208LDC-CAV-000-RE from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDEC | power_in | Digital supply voltage pin for the internal digital domain; the datasheet gives no voltage limits for this pin. |
| 2 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to Ground for optimal EMC performance. |
| 3 | GND | power_in | Ground reference for the supply, listed as the ground supply voltage pin. |
| 4 | TEST/MUST | input | Digital test and factory calibration pin; the datasheet gives no further function or electrical limits for it. |
| 5 | VDD | power_in | Supply voltage pin with nominal Vdd of 4.5 V to 5.5 V and an absolute maximum overvoltage rating of +10 V. |
| 6 | OUT | output | Analog current sensor output with a linear output voltage range of 10% to 90% Vdd when pulled down with 10 kΩ or more. |
| 7 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to Ground for optimal EMC performance. |
| 8 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to Ground for optimal EMC performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Programmable Sensitivity | S | 30 | 40 | 200 | mV/mT | CAV-000 | 8 |
| Nominal Supply Voltage | Vdd | 4.5 | 5 | 5.5 | V | 6 | |
| Supply Current | Idd | 9 | 12 | 14 | mA | W/o output load in application mode; TA = -40 to 150°C | 6 |
| DC load Current | Iout | -2 | 2 | mA | Rout in range [6kΩ, 100kΩ] | 6 | |
| Maximum Output Current (driving capability) | Imax | -2 | 2 | mA | Inside this range, output voltage reaches 3%VDD and 97%VDD | 6 | |
| Output Resistance | 1 | 5 | Ω | Vout = 50% Vdd, RL = 6kΩ | 6 | ||
| Output Capacitive Load | Cload | 1 | 10 | nF | Output amplifier is optimized for the capacitive load range. | 6 | |
| Output resistive load | Rload | 6 | kΩ | Output resistive load for high linearity | 6 | ||
| Leakage current | Ileak | 20 | uA | High impedance mode (1) T=150°C | 6 | ||
| Linear Output Voltage Range | Vout | 10 | 90 | %Vdd | Vout in [10%Vdd, 90%Vdd]; Vout_pd pull down ≥ 10 kΩ | 6 | |
| High-impedance mode levels | Vout_HiZ_pd | 5 | %Vdd | pull-down RL ≤ 25 kΩ, T≤125°C | 6 | ||
| Under-voltage detection | Vdd_uvd | 3 | 3.3 | 4 | V | Low to high voltage | 6 |
| Under-voltage hysteresis | Vdd_uvh | 0.2 | 0.3 | 0.45 | V | Hysteresis | 6 |
| Over-voltage detection | Vdd_ovd | 6.5 | 7.6 | V | Low to High voltage | 7 | |
| Over-voltage hysteresis | Vdd_ovh | 0.05 | 0.7 | V | Hysteresis | 7 | |
| Ratiometry enable detection | Vratio_d | 4 | 4.5 | V | Low to High Voltage | 7 | |
| Ratiometry enable hysteresis | Vratio_h | 0.01 | 0.5 | V | Hysteresis | 7 | |
| Nominal Field Range | Bnom | -50 | 50 | mT | Very high field version, CAV-000 | 8 | |
| Operational Field Range | Bop | -60 | 60 | mT | Very high field version | 8 | |
| Linearity Error | NL | -0.7 | 0.7 | %FS | B in range Bop; Vout in [10%VDD, 90%VDD] | 8 | |
| Hysteresis, remanent Field | Br | -60 | 60 | uT | B = Bop | 8 | |
| Sensitivity programming Resolution | Sres | 0.1 | % | 8 | |||
| Refresh rate | Trr | 0.8 | 1 | 2 | us | 8 | |
| Step Response Time | Tresp | 2 | 3 | μs | Delay between input and output reaching 90%, (2V step at the output, input rise time = 1µs); Noise filter OFF | 8 | |
| Step Response Time | Tresp | 5 | 6 | μs | Delay between input and output reaching 90%, (2V step at the output, input rise time = 1µs); Noise filter ON | 8 | |
| Bandwidth | BW | 200 | 250 | 300 | kHz | Noise filter OFF | 8 |
| Bandwidth | BW | 120 | 150 | 180 | kHz | Noise filter ON | 8 |
| Power on Delay | TPOD | 1 | ms | Vout = 100% of FS; Pull-down resistor ≤100kOhm | 9 | ||
| Ratiometry Cut-off Frequency | Fratio | 250 | Hz | 9 | |||
| Thermal Offset Drift | ΔVoq | -10 | 10 | mV | Offset drift referred to 25°C; S=40mV/mT (xxV version); Vdd=5V, TC=0±150 ppm/°C; Voq=50±0.2 %Vdd | 9 | |
| Thermal Sensitivity Drift | TC | -1.5 | 0 | 1.5 | % of S | 9 | |
| Ratiometry Error Offset | ΔVoq | -0.4 | 0.4 | % of Voq | Voq = 50%Vdd; ΔVdd = 10%Vdd | 9 | |
| Ratiometry Error Sensitivity | ΔS | -0.4 | 0.4 | % of S | ΔVdd = 10%Vdd | 9 | |
| Positive Supply Voltage (overvoltage) | Vdd | 10 | V | 5 | |||
| Reverse Supply Voltage Protection | -0.3 | V | 5 | ||||
| Positive Output Voltage | 10 | V | 5 | ||||
| Output Current | Iout | -70 | 70 | mA | 5 | ||
| Reverse Output Voltage | -0.3 | V | 5 | ||||
| Reverse Output Current | -50 | mA | 5 | ||||
| Operating Ambient Temperature Range | TA | -40 | 150 | °C | 5 | ||
| Storage Temperature Range | TS | -55 | 165 | °C | 5 | ||
| Magnetic Flux Density | -3 | 3 | T | 5 | |||
| Maximum Junction Temperature | Tj,max | -55 | 155 | °C | 5 | ||
| ESD (HBM) | 2 | kV | HBM | 5 | |||
| Package Thermal Resistance (junction-to-ambient) | θja | 174 | °C/W | JEDEC 1s0p board | 5 |
CAD (KiCad official)
- Symbol:
MLX91208LDC-CAV-000-RE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx91208ldc-cav-000-re-etched.step/mlx91208ldc-cav-000-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx91208ldc-cav-000-re.step/mlx91208ldc-cav-000-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (18 pp, sha256
adff91415b95cb6a, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).