main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mlx90421ggo-adc-000-sp: viewers · Ray
mlx90421ggo-adc-000-sp-etched.glb Publish 0.1.0 · Ray
mlx90421ggo-adc-000-sp-etched.step mlx90421ggo-adc-000-sp: factory component page (tier=lcsc) · Ray
mlx90421ggo-adc-000-sp-hero.glb mlx90421ggo-adc-000-sp: hero GLB from the etched model (keeps the MPN mark) · Ray
mlx90421ggo-adc-000-sp-hero.overlay.json Publish 0.1.0 · Ray
mlx90421ggo-adc-000-sp.glb Publish 0.1.0 · Ray
mlx90421ggo-adc-000-sp.kicad_mod Publish 0.1.0 · Ray
mlx90421ggo-adc-000-sp.kicad_sym Publish 0.1.0 · Ray
mlx90421ggo-adc-000-sp.lbr Publish 0.1.0 · Ray
mlx90421ggo-adc-000-sp.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

MLX90421GGO-ADC-000-SP

Melexis · Position Sensor · TSSOP-16

MLX90421GGO-ADC-000-SP from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDEC1 passive Decoupling pin for die 1; absolute maximum 3.6 V positive and -0.3 V reverse for less than 1 h.
2 VSS1 power_in Ground for die 1.
3 VDD1 power_in Supply for die 1; absolute maximum 28 V for less than 48 h and 37 V for less than 60 s at TAMB ≤ 35°C.
4 Test11 passive Melexis factory test pin of die 1, internally grounded in application mode; connect to PCB ground for improved EMC behavior.
5 Test22 passive Melexis factory test pin of die 2, internally grounded in application mode; connect to PCB ground for improved EMC behavior.
6 OUT2 output Ratiometric analog or PWM output of die 2; absolute maximum 28 V for less than 48 h and 34 V for less than 1 h.
7 N.C. unconnected Not connected; connect to PCB ground for improved EMC behavior.
8 N.C. unconnected Not connected; connect to PCB ground for improved EMC behavior.
9 VDEC2 passive Decoupling pin for die 2; absolute maximum 3.6 V positive and -0.3 V reverse for less than 1 h.
10 VSS2 power_in Ground for die 2.
11 VDD2 power_in Supply for die 2; absolute maximum 28 V for less than 48 h and 37 V for less than 60 s at TAMB ≤ 35°C.
12 Test12 passive Melexis factory test pin of die 2, internally grounded in application mode; connect to PCB ground for improved EMC behavior.
13 Test21 passive Melexis factory test pin of die 1, internally grounded in application mode; connect to PCB ground for improved EMC behavior.
14 N.C. unconnected Not connected; connect to PCB ground for improved EMC behavior.
15 OUT1 output Ratiometric analog or PWM output of die 1; absolute maximum 28 V for less than 48 h and 34 V for less than 1 h.
16 N.C. unconnected Not connected; connect to PCB ground for improved EMC behavior.

Key specifications

Parameter Value
Manufacturer Melexis
Package TSSOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 4.5 5 5.5 V 11
Supply Current IDD 7.5 8.5 10 mA Single (per die; dual die multiplied by 2) 11
Start-up Level (rising) VDDstartH 3.85 4 4.15 V 11
PTC Entry Level (rising) VPROV0 5.85 6.05 6.25 V Supply overvoltage detection 11
PTC Entry Level Hysteresis VPROV0Hyst 100 175 250 mV 11
Under voltage detection VDDUVL 3.75 3.9 4.05 V Supply voltage low threshold 11
Regulated Voltage VDEC 3.2 3.3 3.4 V Internal analog voltage 11
Output Short Circuit Current Limit IOUTshort 10 35 mA 11
Digital output resistance Ron 27 50 130 Ω Push-pull mode (out of clamping band) 12
Isolation Resistance Risol 4 MΩ Between dies, measured between VSS1 and VSS2 with +/-20V bias 10
Main Clock Frequency FCK 22.8 24 25.2 MHz Including thermal and lifetime drift 13
Main Clock initial tolerance ΔFCK,0 -1 1 %Fck T=35°C, trimmed 13
Main Clock Frequency Thermal Drift ΔFCK,T -3.5 3.5 %Fck Relative to clock frequency at 35°C. Ageing effect not included 13
1MHz Clock Frequency F1M 0.95 1 1.05 MHz Including thermal and lifetime drift 13
Analog Diagnostics DCT DCTANA 10.9 ms Continuous Acquisition mode 13
Digital Diagnostics DCT DCTDIG 19.7 ms 13
Fail Safe state duration TFSS 5 33 ms For digital single-event faults 13
Output refresh period TangleMeas 448 470 μs Default factory setting 17
Latency τL 228 240 μs Filter 0 17
Start-up time τSU 4.1 5 ms 17
Safe startup time TSafeStup 31 ms Default factory setting OUT_DIAG_HIZ_TIME set to 15 17
PWM Frequency FPWM 100 2000 Hz 17
PWM Frequency Drift ΔFPWM -5 5 %FPWM Over temperature and lifetime 17
Magnetic Flux Density Norm BNorm 10 20 mT see 13.3 for sensing mode description 18
Magnet Temperature Coefficient TCm -2400 0 ppm/°C 18
XY Intrinsic Linearity Error (nominal) LE_XY -1 1 Deg. 20
XZ Intrinsic Linearity Error (nominal) LE_XZ -2.5 2.5 Deg. 20
XY Total Drift (nominal) ∂θTT_XY -0.6 0.6 Deg. 20
XZ Total Drift (nominal) ∂θTT_XZ -0.8 0.8 Deg. Relative to 35°C 20
Supply Voltage Positive VDD 28 V < 48h (37 V for < 60s; TAMB ≤ 35°C) 9
Supply Voltage Reverse VDD-rev -14 V < 48h (-18 V < 1h) 9
Output Voltage Positive VOUT 28 V < 48h (34 V < 1h) 9
Output Voltage Reverse VOUT-rev -14 V < 48h (-18 V < 1h) 9
Internal Voltage Positive VDEC 3.6 V < 1h 9
Internal Voltage Reverse VDEC-rev -0.3 V < 1h 9
Test1 pin Voltage Positive VTest1 6 V < 1h 9
Test1 pin Voltage Reverse VTest1-rev -3 V < 1h 9
Test2 pin Voltage Positive Vtest2 3.6 V < 1h 9
Test2 pin Voltage Reverse Vtest2-rev -0.3 V < 1h 9
Operating Temperature TAMB -40 160 °C 9
Junction Temperature TJ 175 °C 9
Storage Temperature TST -55 170 °C 9
Magnetic Flux Density Bmax -1 1 T 9

CAD (KiCad official)

  • Symbol: MLX90421GGO-ADC-000-SP
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: mlx90421ggo-adc-000-sp-etched.step / mlx90421ggo-adc-000-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90421ggo-adc-000-sp.step / mlx90421ggo-adc-000-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (61 pp, sha256 f46c1cb6837cf778, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF