main
Ray Publish 0.1.0 d654e2f

MLX90393SLW-ABA-013-SP

Melexis · Magnetic Sensors · QFN-16-EP(3x3)

MLX90393SLW-ABA-013-SP from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Interrupt output that signals when the sensed magnetic field changes; optional connection, referenced to VDD_IO.
2 SENB/CS input Chip select / SPI enable input (labelled MS/CS in the Figure 27 marking drawing); must be tied to VDD_IO for I2C and is required for 4-wire and 3-wire SPI, referenced to VDD_IO.
3 SCL/SCLK input I2C clock or SPI clock input from the bus master; required in all three interface configurations, referenced to VDD_IO.
4 N/C unconnected Not connected; the datasheet recommends connecting it to ground.
5 SDA/MOSI bidirectional I2C data line or SPI MOSI data input; required for I2C and 4-wire SPI, and shorted together with MISO for 3-wire SPI, referenced to VDD_IO.
6 MISO output SPI data output; left floating for I2C and required for 4-wire SPI, referenced to VDD_IO.
7 INT/TRIG bidirectional Interrupt and external acquisition trigger pin (labelled INT/TRG in the Figure 27 drawing); optional connection, referenced to VDD_IO.
8 VDD_IO power_in Digital I/O supply, required; absolute maximum is -0.3 V to min(4 V, VDD+0.3 V), and the features list states it supports down to 1.8 V IO voltage.
9 N/C unconnected Not connected; the datasheet recommends connecting it to ground.
10 N/C unconnected Not connected; the datasheet recommends connecting it to ground.
11 A1 input I2C address LSB select, hardwired to VDD or GND (I2C address bit set by shorting A1 to ground or supply); MLX Test pin per the table, not for user use.
12 A0 input I2C address LSB select, hardwired to VDD or GND (I2C address bit set by shorting A0 to ground or supply); MLX Test pin per the table, not for user use.
13 VSS power_in Ground reference, required.
14 N/C unconnected Not connected; the datasheet recommends connecting it to ground.
15 VDD power_in Analog supply, required; absolute maximum range is -0.3 V to 4 V, and the features list gives an operating supply of 2.2 V to 3.6 V.
16 N/C unconnected Not connected; the datasheet recommends connecting it to ground.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Melexis
Package QFN-16-EP(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Supply Voltage Limits VDD_MAX -0.3 4 V 10
Digital IO Supply Limits VDD_IO_MAX -0.3 V max printed as min(4, VDD+0.3) 10
Storage (idle) temperature range TSTORAGE -50 125 °C 10
ESD HBM ESDHBM 2.5 kV According to AEC-Q100-002 10
ESD CDM ESDCDM 750 V According to AEC-Q100-011-B (QFN) 10
Analog Supply Voltage VDD 2.2 3 3.6 V 11
Digital IO Supply VDD_IO 1.65 1.8 V max printed as VDD 11
Power-on Reset threshold VPOR_LH 1.42 1.55 V rising edge 11
Power-on Reset threshold VPOR_HL 1 1.31 V falling edge 11
Conversion Current XY-axis IDD,CONVXY 2.29 3 mA 11
Conversion Current Z-axis IDD,CONVZ 2.96 4 mA 11
Conversion Current Temperature IDD,CONVT 1.6 2 mA 11
Current during TCONV_END IDD, CONV_END 1.5 1.75 mA 11
Current during TACTIVE IDD_ACTIVE 1.2 1.75 mA 11
Current during TSTBY IDD_IDLEtoSTBY 1.2 1.75 mA 11
Standby Current IDD,STBY 43 60 µA 11
Idle Current IDD,IDLE 1 2.4 5 µA 11
SPI Clock Cycle tc (SPC) 100 ns All timings referred to the levels found in Table 6 24
SPI Clock Cycle (as frequency) tc (SPC) 10 MHz All timings referred to the levels found in Table 6 24
CS Setup Time tsu (CS) 5 ns All timings referred to the levels found in Table 6 24
CS Hold Time th (CS) 10 ns All timings referred to the levels found in Table 6 24
SDI Input Setup Time tsu (SI) 5 ns All timings referred to the levels found in Table 6 24
SDI Input Hold Time th (SI) 15 ns All timings referred to the levels found in Table 6 24
SDO Valid Output Time tv (SO) 50 ns All timings referred to the levels found in Table 6 24
SDO Output Hold Time th (SO) 5 ns All timings referred to the levels found in Table 6 24
SDO Output Disable Time tdis (SO) 50 ns All timings referred to the levels found in Table 6 24
Operating temperature range (S grade) -20 85 °C Temperature code S, ordering information (Table 1) 5
Nominal Current IDD,NOM 100 µA TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 11

CAD (KiCad official)

  • Symbol: MLX90393SLW-ABA-013-SP
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mlx90393slw-aba-013-sp-etched.step / mlx90393slw-aba-013-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90393slw-aba-013-sp.step / mlx90393slw-aba-013-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (43 pp, sha256 d39d8a2ad197f7a9, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF