main
Ray
Publish 0.1.0
c8551f8
MLX90393SLW-ABA-012-SP
Melexis · Magnetic Sensors · QFN-16-EP(3x3)
MLX90393SLW-ABA-012-SP from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Interrupt output referenced to VDD_IO, optional in I2C, 4-wire SPI and 3-wire SPI wiring. |
| 2 | SENB/CS | input | Sensor enable / SPI chip-select input referenced to VDD_IO, tied to VDD_IO in I2C mode and required in SPI modes. |
| 3 | SCL/SCLK | input | I2C clock / SPI clock input referenced to VDD_IO, required in I2C, 4-wire SPI and 3-wire SPI. |
| 4 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 5 | SDA/MOSI | bidirectional | I2C data / SPI MOSI bidirectional pin referenced to VDD_IO, required in all modes and shorted to MISO in 3-wire SPI. |
| 6 | MISO | output | SPI data output referenced to VDD_IO, left floating in I2C, required in 4-wire SPI and shorted to SDA/MOSI in 3-wire SPI. |
| 7 | INT/TRIG | bidirectional | Interrupt output or external trigger input referenced to VDD_IO, optional in I2C, 4-wire SPI and 3-wire SPI wiring. |
| 8 | VDD_IO | power_in | Digital I/O supply required in all modes, supports IO voltage down to 1.8 V with absolute maximum -0.3 V to min(4 V, VDD+0.3 V). |
| 9 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 10 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 11 | A1 | input | I2C address LSB select input, tied to VDD or GND in I2C mode and to GND in SPI modes. |
| 12 | A0 | input | I2C address LSB select input, tied to VDD or GND in I2C mode and to GND in SPI modes. |
| 13 | VSS | power_in | Ground reference, required in all modes. |
| 14 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 15 | VDD | power_in | Analog supply required in all modes, 2.2 V to 3.6 V operating with absolute maximum -0.3 V to 4 V. |
| 16 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | QFN-16-EP(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Supply Voltage Limits | VDD_MAX | -0.3 | 4 | V | 10 | ||
| Digital IO Supply Limits | VDD_IO_MAX | -0.3 | V | max printed as min(4, VDD+0.3) | 10 | ||
| Storage (idle) temperature range | TSTORAGE | -50 | 125 | °C | 10 | ||
| ESD HBM | ESDHBM | 2.5 | kV | According to AEC-Q100-002 | 10 | ||
| ESD CDM | ESDCDM | 750 | V | According to AEC-Q100-011-B (QFN) | 10 | ||
| Analog Supply Voltage | VDD | 2.2 | 3 | 3.6 | V | 11 | |
| Digital IO Supply | VDD_IO | 1.65 | 1.8 | V | max printed as VDD | 11 | |
| Power-on Reset threshold (rising edge) | VPOR_LH | 1.42 | 1.55 | V | 11 | ||
| Power-on Reset threshold (falling edge) | VPOR_HL | 1 | 1.31 | V | 11 | ||
| Conversion Current XY-axis | IDD,CONVXY | 2.29 | 3 | mA | 11 | ||
| Conversion Current Z-axis | IDD,CONVZ | 2.96 | 4 | mA | 11 | ||
| Conversion Current Temperature | IDD,CONVT | 1.6 | 2 | mA | 11 | ||
| Current during TCONV_END | IDD, CONV_END | 1.5 | 1.75 | mA | 11 | ||
| Current during TACTIVE | IDD_ACTIVE | 1.2 | 1.75 | mA | 11 | ||
| Current during TSTBY | IDD_IDLEtoSTBY | 1.2 | 1.75 | mA | 11 | ||
| Standby Current | IDD,STBY | 43 | 60 | µA | 11 | ||
| Idle Current | IDD,IDLE | 1 | 2.4 | 5 | µA | 11 | |
| Nominal Current | IDD,NOM | 100 | µA | TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 | 11 | ||
| SPI Clock Cycle | tc (SPC) | 100 | ns | 24 | |||
| SPI Clock Cycle | tc (SPC) | 10 | MHz | 24 | |||
| CS Setup Time | tsu (CS) | 5 | ns | 24 | |||
| CS Hold Time | th (CS) | 10 | ns | 24 | |||
| SDI Input Setup Time | tsu (SI) | 5 | ns | 24 | |||
| SDI Input Hold Time | th (SI) | 15 | ns | 24 | |||
| SDO Valid Output Time | tv (SO) | 50 | ns | 24 | |||
| SDO Output Hold Time | th (SO) | 5 | ns | 24 | |||
| SDO Output Disable Time | tdis (SO) | 50 | ns | 24 |
CAD (KiCad official)
- Symbol:
MLX90393SLW-ABA-012-SP - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
mlx90393slw-aba-012-sp-etched.step/mlx90393slw-aba-012-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90393slw-aba-012-sp.step/mlx90393slw-aba-012-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (43 pp, sha256
d39d8a2ad197f7a9, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MLX90393SLW-ABA-012-SP
**Melexis** · Magnetic Sensors · QFN-16-EP(3x3)
MLX90393SLW-ABA-012-SP from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Interrupt output referenced to VDD_IO, optional in I2C, 4-wire SPI and 3-wire SPI wiring. |
| 2 | SENB/CS | input | Sensor enable / SPI chip-select input referenced to VDD_IO, tied to VDD_IO in I2C mode and required in SPI modes. |
| 3 | SCL/SCLK | input | I2C clock / SPI clock input referenced to VDD_IO, required in I2C, 4-wire SPI and 3-wire SPI. |
| 4 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 5 | SDA/MOSI | bidirectional | I2C data / SPI MOSI bidirectional pin referenced to VDD_IO, required in all modes and shorted to MISO in 3-wire SPI. |
| 6 | MISO | output | SPI data output referenced to VDD_IO, left floating in I2C, required in 4-wire SPI and shorted to SDA/MOSI in 3-wire SPI. |
| 7 | INT/TRIG | bidirectional | Interrupt output or external trigger input referenced to VDD_IO, optional in I2C, 4-wire SPI and 3-wire SPI wiring. |
| 8 | VDD_IO | power_in | Digital I/O supply required in all modes, supports IO voltage down to 1.8 V with absolute maximum -0.3 V to min(4 V, VDD+0.3 V). |
| 9 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 10 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 11 | A1 | input | I2C address LSB select input, tied to VDD or GND in I2C mode and to GND in SPI modes. |
| 12 | A0 | input | I2C address LSB select input, tied to VDD or GND in I2C mode and to GND in SPI modes. |
| 13 | VSS | power_in | Ground reference, required in all modes. |
| 14 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 15 | VDD | power_in | Analog supply required in all modes, 2.2 V to 3.6 V operating with absolute maximum -0.3 V to 4 V. |
| 16 | N/C | unconnected | Not connected; datasheet recommends connecting it to ground. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | QFN-16-EP(3x3) |
| Category | Sensors |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Supply Voltage Limits | VDD_MAX | -0.3 | | 4 | V | | 10 |
| Digital IO Supply Limits | VDD_IO_MAX | -0.3 | | | V | max printed as min(4, VDD+0.3) | 10 |
| Storage (idle) temperature range | TSTORAGE | -50 | | 125 | °C | | 10 |
| ESD HBM | ESDHBM | | | 2.5 | kV | According to AEC-Q100-002 | 10 |
| ESD CDM | ESDCDM | | | 750 | V | According to AEC-Q100-011-B (QFN) | 10 |
| Analog Supply Voltage | VDD | 2.2 | 3 | 3.6 | V | | 11 |
| Digital IO Supply | VDD_IO | 1.65 | 1.8 | | V | max printed as VDD | 11 |
| Power-on Reset threshold (rising edge) | VPOR_LH | 1.42 | | 1.55 | V | | 11 |
| Power-on Reset threshold (falling edge) | VPOR_HL | 1 | | 1.31 | V | | 11 |
| Conversion Current XY-axis | IDD,CONVXY | | 2.29 | 3 | mA | | 11 |
| Conversion Current Z-axis | IDD,CONVZ | | 2.96 | 4 | mA | | 11 |
| Conversion Current Temperature | IDD,CONVT | | 1.6 | 2 | mA | | 11 |
| Current during TCONV_END | IDD, CONV_END | | 1.5 | 1.75 | mA | | 11 |
| Current during TACTIVE | IDD_ACTIVE | | 1.2 | 1.75 | mA | | 11 |
| Current during TSTBY | IDD_IDLEtoSTBY | | 1.2 | 1.75 | mA | | 11 |
| Standby Current | IDD,STBY | | 43 | 60 | µA | | 11 |
| Idle Current | IDD,IDLE | 1 | 2.4 | 5 | µA | | 11 |
| Nominal Current | IDD,NOM | | 100 | | µA | TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 | 11 |
| SPI Clock Cycle | tc (SPC) | | | 100 | ns | | 24 |
| SPI Clock Cycle | tc (SPC) | | | 10 | MHz | | 24 |
| CS Setup Time | tsu (CS) | 5 | | | ns | | 24 |
| CS Hold Time | th (CS) | 10 | | | ns | | 24 |
| SDI Input Setup Time | tsu (SI) | 5 | | | ns | | 24 |
| SDI Input Hold Time | th (SI) | 15 | | | ns | | 24 |
| SDO Valid Output Time | tv (SO) | | | 50 | ns | | 24 |
| SDO Output Hold Time | th (SO) | 5 | | | ns | | 24 |
| SDO Output Disable Time | tdis (SO) | | | 50 | ns | | 24 |
## CAD (KiCad official)
- Symbol: `MLX90393SLW-ABA-012-SP`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `mlx90393slw-aba-012-sp-etched.step` / `mlx90393slw-aba-012-sp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mlx90393slw-aba-012-sp.step` / `mlx90393slw-aba-012-sp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Melexis datasheet](docs/mlx90393slw-aba-012-sp-datasheet.pdf) (43 pp, sha256 `d39d8a2ad197f7a9`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mlx90393slw-aba-012-sp-datasheet.pdf)