Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MLX90393SLW-ABA-012-RE

Melexis · Hall Sensor · QFN-16-EP(3x3)

MLX90393SLW-ABA-012-RE from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Interrupt output referenced to VDD_IO that signals an external interrupt when the magnetic field changes, optional in I2C, 4-wire SPI and 3-wire SPI wiring.
2 SENB/CS input Chip select input referenced to VDD_IO, tied to VDD_IO in I2C mode and required in 4-wire and 3-wire SPI wiring.
3 SCL/SCLK input I2C clock (SCL) or SPI clock (SCLK) input referenced to VDD_IO, required in all interface wirings.
4 N/C unconnected Not connected; the datasheet recommends connecting N/C pins to ground.
5 SDA/MOSI bidirectional I2C data (SDA) or SPI MOSI bidirectional line referenced to VDD_IO, required in I2C and 4-wire SPI and shorted to MISO in 3-wire SPI.
6 MISO output SPI MISO output referenced to VDD_IO, left floating in I2C mode and required in 4-wire SPI.
7 INT/TRIG bidirectional Bidirectional interrupt/trigger pin referenced to VDD_IO, optional in all wiring modes, used for external acquisition triggering.
8 VDD_IO power_in Digital I/O supply, required in all wirings; limits are -0.3 V to min(4, VDD+0.3) V and it supports down to 1.8 V IO voltage.
9 N/C unconnected Not connected; the datasheet recommends connecting N/C pins to ground.
10 N/C unconnected Not connected; the datasheet recommends connecting N/C pins to ground.
11 A1 input I2C address LSB pin, tied to VDD or GND to set the address bit, and tied to GND in SPI wiring.
12 A0 input I2C address LSB pin, tied to VDD or GND to set the address bit, and tied to GND in SPI wiring.
13 VSS power_in Ground reference, required in all interface wirings.
14 N/C unconnected Not connected; the datasheet recommends connecting N/C pins to ground.
15 VDD power_in Analog supply, required in all wirings; absolute maximum range is -0.3 V to 4 V and the operating supply is 2.2 V to 3.6 V.
16 N/C unconnected Not connected; the datasheet recommends connecting N/C pins to ground.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Melexis
Package QFN-16-EP(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Supply Voltage VDD 2.2 3 3.6 V 11
Digital IO Supply VDD_IO 1.65 1.8 V 11
Power-on Reset threshold (rising edge) VPOR_LH 1.42 1.55 V 11
Power-on Reset threshold (falling edge) VPOR_HL 1 1.31 V 11
Conversion Current XY-axis IDD,CONVXY 2.29 3 mA 11
Conversion Current Z-axis IDD,CONVZ 2.96 4 mA 11
Conversion Current Temperature IDD,CONVT 1.6 2 mA 11
Current during TCONV_END IDD, CONV_END 1.5 1.75 mA 11
Current during TACTIVE IDD_ACTIVE 1.2 1.75 mA 11
Current during TSTBY IDD_IDLEtoSTBY 1.2 1.75 mA 11
Standby Current IDD,STBY 43 60 µA Standby current (footnote 1: only low power oscillator running in digital) 11
Idle Current IDD,IDLE 1 2.4 5 µA Idle mode (footnote 2: all operating functions disabled except communications) 11
Nominal Current (TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4) IDD,NOM 100 µA TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 11
Analog Supply Voltage Limits VDD_MAX -0.3 4 V 10
Digital IO Supply Limits VDD_IO_MAX -0.3 V 10
Storage (idle) temperature range TSTORAGE -50 125 °C 10
ESD Human Body Model ESDHBM 2.5 kV According to AEC-Q100-002 10
ESD Charged Device Model ESDCDM 750 V According to AEC-Q100-011-B (QFN) 10
Operating temperature range (S grade) -20 85 °C Temperature code S for MLX90393 S LW ABA-012 RE 5
SPI Clock Cycle tc (SPC) 100 ns 24
SPI Clock Frequency tc (SPC) 10 MHz 24
CS Setup Time tsu (CS) 5 ns 24
CS Hold Time th (CS) 10 ns 24
SDI Input Setup Time tsu (SI) 5 ns 24
SDI Input Hold Time th (SI) 15 ns 24
SDO Valid Output Time tv (SO) 50 ns 24
SDO Output Hold Time th (SO) 5 ns 24
SDO Output Disable Time tdis (SO) 50 ns 24

CAD (KiCad official)

  • Symbol: MLX90393SLW-ABA-012-RE
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mlx90393slw-aba-012-re-etched.step / mlx90393slw-aba-012-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90393slw-aba-012-re.step / mlx90393slw-aba-012-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (43 pp, sha256 d39d8a2ad197f7a9, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF