main
Ray Publish 0.1.0 d7bc6c8

MLX90393ELW-ABA-014-SP

Melexis · Magnetic Sensors · QFN-16-EP(3x3)

MLX90393ELW-ABA-014-SP from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Interrupt output that signals when the measured field changes, optional in the recommended wiring and referenced to VDD_IO.
2 SENB/CS input Chip-select/enable input that is required for both I2C and SPI operation and is tied to VDD_IO.
3 SCL/SCLK input Serial clock input (I2C SCL or SPI SCLK), required on all listed interface wirings and referenced to VDD_IO.
4 N/C unconnected Not connected; the datasheet recommends connecting unused N/C pins to Ground.
5 SDA/MOSI bidirectional Serial data line (I2C SDA or SPI MOSI), required in I2C and 4-wire SPI and shorted together with MISO in 3-wire SPI, referenced to VDD_IO.
6 MISO output SPI data output that is left floating in I2C mode and required in 4-wire SPI, referenced to VDD_IO.
7 INT/TRIG bidirectional Combined external acquisition trigger and interrupt pin, optional in the recommended wiring and referenced to VDD_IO.
8 VDD_IO power_in Digital I/O supply, required; the datasheet limits it to -0.3 V up to min(4, VDD+0.3) V and supports IO voltages down to 1.8 V.
9 N/C unconnected Not connected; the datasheet recommends connecting unused N/C pins to Ground.
10 N/C unconnected Not connected; the datasheet recommends connecting unused N/C pins to Ground.
11 A1 input I2C address LSB input, tied to VDD or GND to select the address bit.
12 A0 input I2C address LSB input, tied to VDD or GND to select the address bit.
13 VSS power_in Ground reference, required.
14 N/C unconnected Not connected; the datasheet recommends connecting unused N/C pins to Ground.
15 VDD power_in Analog supply, required; the datasheet specifies a 2.2 V to 3.6 V supply range and an absolute maximum of -0.3 V to 4 V.
16 N/C unconnected Not connected; the datasheet recommends connecting unused N/C pins to Ground.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Melexis
Package QFN-16-EP(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Supply Voltage Limits VDD_MAX -0.3 4 V 10
Digital IO Supply Limits VDD_IO_MAX -0.3 V max is min(4, VDD+0.3) 10
Storage (idle) temperature range TSTORAGE -50 125 °C 10
Analog Supply Voltage VDD 2.2 3 3.6 V 11
Digital IO Supply VDD_IO 1.65 1.8 V 11
Power-on Reset threshold (rising edge) VPOR_LH 1.42 1.55 V rising edge 11
Power-on Reset threshold (falling edge) VPOR_HL 1 1.31 V falling edge 11
Conversion Current XY-axis IDD,CONVXY 2.29 3 mA 11
Conversion Current Z-axis IDD,CONVZ 2.96 4 mA 11
Conversion Current Temperature IDD,CONVT 1.6 2 mA 11
Current during TCONV_END IDD, CONV_END 1.5 1.75 mA 11
Current during TACTIVE IDD_ACTIVE 1.2 1.75 mA 11
Current during TSTBY IDD_IDLEtoSTBY 1.2 1.75 mA 11
Standby Current IDD,STBY 43 60 µA 11
Idle Current IDD,IDLE 1 2.4 5 µA 11
Nominal Current IDD,NOM 100 µA TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 11
Operating temperature range (E grade) -40 85 °C MLX90393 E temperature code 5
SPI Clock Cycle tc (SPC) 100 ns 24
SPI Clock Frequency tc (SPC) 10 MHz 24
CS Setup Time tsu (CS) 5 ns 24
CS Hold Time th (CS) 10 ns 24
SDI Input Setup Time tsu (SI) 5 ns 24
SDI Input Hold Time th (SI) 15 ns 24
SDO Valid Output Time tv (SO) 50 ns 24
SDO Output Hold Time th (SO) 5 ns 24
SDO Output Disable Time tdis (SO) 50 ns 24

CAD (KiCad official)

  • Symbol: MLX90393ELW-ABA-014-SP
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mlx90393elw-aba-014-sp-etched.step / mlx90393elw-aba-014-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90393elw-aba-014-sp.step / mlx90393elw-aba-014-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (43 pp, sha256 d39d8a2ad197f7a9, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF