Generated by kicad-footprint-generator · KiCad file format 20260206
MLX90393ELW-ABA-014-RE
Melexis · Magnetic Sensors · QFN-16-EP(3x3)
MLX90393ELW-ABA-014-RE from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Interrupt output (I/O out) referenced to VDD_IO; wiring is optional in I2C, 4-wire SPI and 3-wire SPI. |
| 2 | SENB/CS | input | Sensor enable / chip select input referenced to VDD_IO; tied to VDD_IO for I2C and required for 4-wire and 3-wire SPI. |
| 3 | SCL/SCLK | input | I2C clock / SPI clock input referenced to VDD_IO; required in I2C, 4-wire SPI and 3-wire SPI. |
| 4 | N/C | unconnected | Not connected; datasheet recommends connecting N/C pins to ground. |
| 5 | SDA/MOSI | bidirectional | I2C data / SPI MOSI bidirectional pin referenced to VDD_IO; required in all modes and shorted together with MISO for 3-wire SPI. |
| 6 | MISO | output | SPI data output referenced to VDD_IO; left floating in I2C, required for 4-wire SPI and shorted to SDA/MOSI for 3-wire SPI. |
| 7 | INT/TRIG | bidirectional | Interrupt output / external trigger input referenced to VDD_IO; wiring is optional in I2C, 4-wire SPI and 3-wire SPI. |
| 8 | VDD_IO | power_in | Digital I/O supply, required in all modes; absolute maximum -0.3 V to min(4 V, VDD+0.3 V), operation down to 1.8 V IO voltage. |
| 9 | N/C | unconnected | Not connected; datasheet recommends connecting N/C pins to ground. |
| 10 | N/C | unconnected | Not connected; datasheet recommends connecting N/C pins to ground. |
| 11 | A1 | input | I2C address LSB (bit 1) input, tied to VDD or GND for I2C and to GND for SPI. |
| 12 | A0 | input | I2C address LSB (bit 0) input, tied to VDD or GND for I2C and to GND for SPI. |
| 13 | VSS | power_in | Ground reference, required in all modes. |
| 14 | N/C | unconnected | Not connected; datasheet recommends connecting N/C pins to ground. |
| 15 | VDD | power_in | Analog supply, 2.2 V to 3.6 V operating, absolute maximum -0.3 V to 4 V, required in all modes. |
| 16 | N/C | unconnected | Not connected; datasheet recommends connecting N/C pins to ground. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | QFN-16-EP(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Supply Voltage | VDD | 2.2 | 3 | 3.6 | V | 11 | |
| Digital IO Supply | VDD_IO | 1.65 | 1.8 | V | max printed as VDD | 11 | |
| Power-on Reset threshold (rising edge) | VPOR_LH | 1.42 | 1.55 | V | rising edge | 11 | |
| Power-on Reset threshold (falling edge) | VPOR_HL | 1 | 1.31 | V | falling edge | 11 | |
| Conversion Current XY-axis | IDD,CONVXY | 2.29 | 3 | mA | 11 | ||
| Conversion Current Z-axis | IDD,CONVZ | 2.96 | 4 | mA | 11 | ||
| Conversion Current Temperature | IDD,CONVT | 1.6 | 2 | mA | 11 | ||
| Current during TCONV_END | IDD, CONV_END | 1.5 | 1.75 | mA | 11 | ||
| Current during TACTIVE | IDD_ACTIVE | 1.2 | 1.75 | mA | 11 | ||
| Current during TSTBY | IDD_IDLEtoSTBY | 1.2 | 1.75 | mA | 11 | ||
| Standby Current | IDD,STBY | 43 | 60 | µA | 11 | ||
| Idle Current | IDD,IDLE | 1 | 2.4 | 5 | µA | 11 | |
| Nominal Current | IDD,NOM | 100 | µA | TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 | 11 | ||
| Analog Supply Voltage Limits | VDD_MAX | -0.3 | 4 | V | 10 | ||
| Digital IO Supply Limits | VDD_IO_MAX | -0.3 | V | max printed as min(4, VDD+0.3) | 10 | ||
| Storage (idle) temperature range | TSTORAGE | -50 | 125 | °C | 10 | ||
| ESD HBM | ESDHBM | 2.5 | kV | According to AEC-Q100-002 | 10 | ||
| ESD CDM | ESDCDM | 750 | V | According to AEC-Q100-011-B (QFN) | 10 | ||
| Operating temperature (E grade) | -40 | 85 | °C | Temperature code E | 5 | ||
| SPI Clock Cycle | tc (SPC) | 100 | ns | 24 | |||
| SPI Clock frequency | tc (SPC) | 10 | MHz | 24 | |||
| CS Setup Time | tsu (CS) | 5 | ns | 24 | |||
| CS Hold Time | th (CS) | 10 | ns | 24 | |||
| SDI Input Setup Time | tsu (SI) | 5 | ns | 24 | |||
| SDI Input Hold Time | th (SI) | 15 | ns | 24 | |||
| SDO Valid Output Time | tv (SO) | 50 | ns | 24 | |||
| SDO Output Hold Time | th (SO) | 5 | ns | 24 | |||
| SDO Output Disable Time | tdis (SO) | 50 | ns | 24 |
CAD (KiCad official)
- Symbol:
MLX90393ELW-ABA-014-RE - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
mlx90393elw-aba-014-re-etched.step/mlx90393elw-aba-014-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90393elw-aba-014-re.step/mlx90393elw-aba-014-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (43 pp, sha256
d39d8a2ad197f7a9, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).