main
Ray Publish 0.1.0 b2d1e2b

MLX90393ELW-ABA-013-RE

Melexis · Magnetic Sensors · QFN-16-EP(3x3)

MLX90393ELW-ABA-013-RE from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Interrupt output referenced to VDD_IO; connection is optional in I2C, 4-wire SPI and 3-wire SPI.
2 SENB/CS input Chip select input referenced to VDD_IO, tied to VDD_IO for I2C and required for 4-wire and 3-wire SPI; MLX test function is the secondary function.
3 SCL/SCLK input I2C clock / SPI clock input referenced to VDD_IO, required in I2C, 4-wire SPI and 3-wire SPI.
4 N/C unconnected Not connected; datasheet recommends connecting N/C pins to ground.
5 SDA/MOSI bidirectional I2C data / SPI MOSI bidirectional pin referenced to VDD_IO, required in all modes and shorted together with MISO (pin 6) in 3-wire SPI.
6 MISO output SPI data output referenced to VDD_IO, left floating in I2C, required in 4-wire SPI and shorted to SDA/MOSI in 3-wire SPI.
7 INT/TRIG bidirectional Interrupt output / external trigger input referenced to VDD_IO; connection is optional in I2C, 4-wire SPI and 3-wire SPI.
8 VDD_IO power_in Digital IO supply, required in all modes; absolute maximum -0.3 V to min(4 V, VDD+0.3 V), operation down to 1.8 V IO voltage.
9 N/C unconnected Not connected; datasheet recommends connecting N/C pins to ground.
10 N/C unconnected Not connected; datasheet recommends connecting N/C pins to ground.
11 A1 input I2C address LSB select input (tie to VDD or GND in I2C, to GND in SPI), referenced to VDD.
12 A0 input I2C address LSB select input (tie to VDD or GND in I2C, to GND in SPI), referenced to VDD.
13 VSS power_in Ground, required in all modes.
14 N/C unconnected Not connected; datasheet recommends connecting N/C pins to ground.
15 VDD power_in Analog supply, required in all modes; 2.2 V to 3.6 V operating, absolute maximum -0.3 V to 4 V.
16 N/C unconnected Not connected; datasheet recommends connecting N/C pins to ground.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Melexis
Package QFN-16-EP(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Supply Voltage VDD 2.2 3 3.6 V 11
Digital IO Supply VDD_IO 1.65 1.8 V max printed as VDD 11
Power-on Reset threshold (rising edge) VPOR_LH 1.42 1.55 V 11
Power-on Reset threshold (falling edge) VPOR_HL 1 1.31 V 11
Conversion Current XY-axis IDD,CONVXY 2.29 3 mA 11
Conversion Current Z-axis IDD,CONVZ 2.96 4 mA 11
Conversion Current Temperature IDD,CONVT 1.6 2 mA 11
Current during TCONV_END IDD, CONV_END 1.5 1.75 mA 11
Current during TACTIVE IDD_ACTIVE 1.2 1.75 mA 11
Current during TSTBY IDD_IDLEtoSTBY 1.2 1.75 mA 11
Standby Current IDD,STBY 43 60 µA 11
Idle Current IDD,IDLE 1 2.4 5 µA 11
Nominal Current IDD,NOM 100 µA TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 11
Analog Supply Voltage Limits VDD_MAX -0.3 4 V 10
Digital IO Supply Limits VDD_IO_MAX -0.3 V max printed as min(4, VDD+0.3) 10
Storage temperature range TSTORAGE -50 125 °C Storage (idle) 10
ESD HBM ESDHBM 2.5 kV According to AEC-Q100-002 10
ESD CDM ESDCDM 750 V According to AEC-Q100-011-B (QFN) 10
Operating temperature (E code) -40 85 °C Temperature code E 5
SPI Clock Cycle tc (SPC) 100 ns 24
SPI Clock Frequency tc (SPC) 10 MHz 24
CS Setup Time tsu (CS) 5 ns 24
CS Hold Time th (CS) 10 ns 24
SDI Input Setup Time tsu (SI) 5 ns 24
SDI Input Hold Time th (SI) 15 ns 24
SDO Valid Output Time tv (SO) 50 ns 24
SDO Output Hold Time th (SO) 5 ns 24
SDO Output Disable Time tdis (SO) 50 ns 24

CAD (KiCad official)

  • Symbol: MLX90393ELW-ABA-013-RE
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mlx90393elw-aba-013-re-etched.step / mlx90393elw-aba-013-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90393elw-aba-013-re.step / mlx90393elw-aba-013-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (43 pp, sha256 d39d8a2ad197f7a9, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF