Generated by kicad-footprint-generator · KiCad file format 20260206
MLX90393ELW-ABA-012-RE
Melexis · Hall Sensor · QFN-16-EP(3x3)
MLX90393ELW-ABA-012-RE from Melexis, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Optional interrupt output that signals an external change when the magnetic field changes, referenced to VDD_IO. |
| 2 | MS/CS | input | Mode select (I2C) or chip select (SPI) input, required to be tied to VDD_IO. |
| 3 | SCL/SCLK | input | I2C clock or SPI serial clock input, required connection referenced to VDD_IO. |
| 4 | N/C | unconnected | Not connected; the datasheet recommends connecting it to ground. |
| 5 | SDA/MOSI | bidirectional | I2C serial data or SPI master-out slave-in line, required and shorted together with the SPI data line in 3-wire SPI mode. |
| 6 | MISO | output | SPI master-in slave-out data output; left floating in I2C mode and required in SPI mode. |
| 7 | INT/TRIG | bidirectional | Optional interrupt/trigger pin for external acquisition triggering, referenced to VDD_IO. |
| 8 | VDD_IO | power_in | Digital IO supply, which can go down to 1.8V IO voltage, with absolute maximum min(4, VDD+0.3) V. |
| 9 | N/C | unconnected | Not connected; the datasheet recommends connecting it to ground. |
| 10 | N/C | unconnected | Not connected; the datasheet recommends connecting it to ground. |
| 11 | A1 | input | I2C address least significant bit select, wired to VDD or GND to set the address bit. |
| 12 | A0 | input | I2C address least significant bit select, wired to VDD or GND to set the address bit. |
| 13 | VSS | power_in | Ground pin, required connection. |
| 14 | N/C | unconnected | Not connected; the datasheet recommends connecting it to ground. |
| 15 | VDD | power_in | Analog supply pin, specified at 2.2V to 3.6V, with absolute maximum range -0.3 to 4 V. |
| 16 | N/C | unconnected | Not connected; the datasheet recommends connecting it to ground. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | QFN-16-EP(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Analog Supply Voltage | VDD | 2.2 | 3 | 3.6 | V | 10 | |
| Digital IO Supply | VDD_IO | 1.65 | 1.8 | V | 10 | ||
| Power-on Reset threshold (rising edge) | VPOR_LH | 1.42 | 1.55 | V | 10 | ||
| Power-on Reset threshold (falling edge) | VPOR_HL | 1 | 1.31 | V | 10 | ||
| Conversion Current XY-axis | IDD,CONVXY | 2.29 | 3 | mA | 10 | ||
| Conversion Current Z-axis | IDD,CONVZ | 2.96 | 4 | mA | 10 | ||
| Conversion Current Temperature | IDD,CONVT | 1.6 | 2 | mA | 10 | ||
| Current during TCONV_END | IDD, CONV_END | 1.5 | 1.75 | mA | 10 | ||
| Current during TACTIVE | IDD_ACTIVE | 1.2 | 1.75 | mA | 10 | ||
| Current during TSTBY | IDD_IDLEtoSTBY | 1.2 | 1.75 | mA | 10 | ||
| Standby Current | IDD,STBY | 43 | 60 | µA | Footnote 1: only low-power oscillator running in digital | 10 | |
| Idle Current | IDD,IDLE | 1 | 2.4 | 5 | µA | Footnote 2: all operating functions disabled except communications | 10 |
| Nominal Current (TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4) | IDD,NOM | 100 | µA | TXYZ, Datarate = 10Hz, OSR=OSR2=0, DIG_FILT=4 | 10 | ||
| Analog Supply Voltage Limits | VDD_MAX | -0.3 | 4 | V | 9 | ||
| Digital IO Supply Limits | VDD_IO_MAX | -0.3 | V | Max printed as min(4, VDD+0.3) | 9 | ||
| Storage (idle) temperature range | TSTORAGE | -50 | 125 | °C | 9 | ||
| ESD Human Body Model | ESDHBM | 2.5 | kV | According to AEC-Q100-002 | 9 | ||
| ESD Charged Device Model (QFN) | ESDCDM | 750 | V | According to AEC-Q100-011-B (QFN) | 9 | ||
| Operating temperature range (E grade, MLX90393ELW) | -40 | 85 | °C | Temperature code E: from -40°C to 85°C | 4 | ||
| SPI Clock Cycle | tc (SPC) | 100 | ns | Referred to levels in Table 6 | 24 | ||
| SPI Clock Frequency | tc (SPC) | 10 | MHz | Referred to levels in Table 6 | 24 | ||
| CS Setup Time | tsu (CS) | 5 | ns | Referred to levels in Table 6 | 24 | ||
| CS Hold Time | th (CS) | 10 | ns | Referred to levels in Table 6 | 24 | ||
| SDI Input Setup Time | tsu (SI) | 5 | ns | Referred to levels in Table 6 | 24 | ||
| SDI Input Hold Time | th (SI) | 15 | ns | Referred to levels in Table 6 | 24 | ||
| SDO Valid Output Time | tv (SO) | 50 | ns | Referred to levels in Table 6 | 24 | ||
| SDO Output Hold Time | th (SO) | 5 | ns | Referred to levels in Table 6 | 24 | ||
| SDO Output Disable Time | tdis (SO) | 50 | ns | Referred to levels in Table 6 | 24 |
CAD (KiCad official)
- Symbol:
MLX90393ELW-ABA-012-RE - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
mlx90393elw-aba-012-re-etched.step/mlx90393elw-aba-012-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90393elw-aba-012-re.step/mlx90393elw-aba-012-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (45 pp, sha256
8fec339a36d214b4, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).