main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mlx90380lgo-bab-103-sp: viewers · Ray
mlx90380lgo-bab-103-sp-etched.glb Publish 0.1.0 · Ray
mlx90380lgo-bab-103-sp-etched.step mlx90380lgo-bab-103-sp: factory component page (tier=lcsc) · Ray
mlx90380lgo-bab-103-sp-hero.glb mlx90380lgo-bab-103-sp: hero GLB from the etched model (keeps the MPN mark) · Ray
mlx90380lgo-bab-103-sp-hero.overlay.json Publish 0.1.0 · Ray
mlx90380lgo-bab-103-sp.glb Publish 0.1.0 · Ray
mlx90380lgo-bab-103-sp.kicad_mod Publish 0.1.0 · Ray
mlx90380lgo-bab-103-sp.kicad_sym Publish 0.1.0 · Ray
mlx90380lgo-bab-103-sp.lbr Publish 0.1.0 · Ray
mlx90380lgo-bab-103-sp.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

MLX90380LGO-BAB-103-SP

Melexis · Angle, Linear Position Sensors · TSSOP-16

MLX90380LGO-BAB-103-SP from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS_A power_in Supply ground for Die A.
2 NC unconnected Not used; connect to ground for optimal EMC behavior.
3 NC unconnected Not used; connect to ground for optimal EMC behavior.
4 TEST_A passive Test pin for Die A; connect to ground for optimal EMC behavior.
5 OUT2_B output Analog output SIN of Die B, load 10 kΩ min (3.3V) or 5 kΩ min (5V) and 1.5 to 10 nF to GND.
6 VDD5V_B power_in 5V supply for Die B (4.5 to 5.5 V operating).
7 VDD3V3_B power_in 3.3V supply for Die B (3.135 to 3.6 V operating); leave floating in 5V applications.
8 OUT1_B output Analog output COS of Die B, load 10 kΩ min (3.3V) or 5 kΩ min (5V) and 1.5 to 10 nF to GND.
9 VSS_B power_in Supply ground for Die B.
10 NC unconnected Not used; connect to ground for optimal EMC behavior.
11 TEST_B passive Test pin for Die B; connect to ground for optimal EMC behavior.
12 NC unconnected Not used; connect to ground for optimal EMC behavior.
13 OUT2_A output Analog output SIN of Die A, load 10 kΩ min (3.3V) or 5 kΩ min (5V) and 1.5 to 10 nF to GND.
14 VDD5V_A power_in 5V supply for Die A (4.5 to 5.5 V operating).
15 VDD3V3_A power_in 3.3V supply for Die A (3.135 to 3.6 V operating); leave floating in 5V applications.
16 OUT1_A output Analog output COS of Die A, load 10 kΩ min (3.3V) or 5 kΩ min (5V) and 1.5 to 10 nF to GND.

Key specifications

Parameter Value
Manufacturer Melexis
Package TSSOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (5V) VDD5V -16 24 V 12
Supply Current (abs max) IDD -10 10 mA Excluding external load on OUT1&2. 12
Negative Output Voltage VOUT -0.3 V 12
Positive Output Voltage (5V Application Diagram) VOUT 18 V 5V Application Diagram 12
Output Current IOUT -20 20 mA 12
Operating Temperature Range TA -40 150 °C 12
Maximum Junction Temperature TJ 165 °C 12
Storage Temperature Range TS -55 165 °C 12
ESD Sensitivity (HBM) ESDHBM 1.5 kV AEC-Q100-002; TSSOP-16 cross die ESD limit 12
ESD Sensitivity (CDM) ESDCDM 500 V AEC-Q100-011 12
Maximum Flux Density B -1 1 T 12
Supply Voltage (operating) VDD5V 4.5 5 5.5 V SOIC-8 and TSSOP-16 packages 12
Supply Current IDD 6 10 mA Excluding external load on OUT1&2; 4.5 ≤ VDD ≤ 5.5 12
Power On Reset Voltage Rising VPOR_H 2.9 3.4 3.9 V OUT HiZ operating mode; Application Diagram VDD5V 13
Power On Reset Voltage Falling VPOR_L 2.5 3.05 3.5 V Operating mode OUT HiZ; Application Diagram VDD5V 13
Programming Voltage (PTC) MT7V 6.1 6.5 7 V Rising Entry Level on VDD 13
Load Current Range IOUT -1 1 mA 13
Load Resistance Range RL 5 kΩ Connected between OUT and GND; Application Diagram VDD5V 13
Load Capacitor Range CL 1.5 2.2 10 ηF Connected between OUT and GND 13
Output Voltage Range VO 5 95 %VDD Linearity better than 1.5% 13
Output Voltage Range VO 10 90 %VDD Linearity better than 0.5% 13
Output Resistance ROUT 25 Ω IOUT= ±1mA 13
Power-On Time tON 200 µs High bandwidth programming 13
Chopping Frequency FCHOP 0.9 1 1.1 MHz 13
Output Update Period TS 4 µs Each field component takes 2s, measured sequentially 13
Output Noise Voltage Vnrms 3.1 mV RMS noise, B=0mT, VDD = typical value, S=1 %VDD/mT; Low bandwidth programming 13
Nyquist Frequency Fnyq 125 kHz 13
Tracking Delay 74 85.5 µs Low bandwidth 13
Full Scale Magnetic Range (programmable) Bfs 10 70 mT 14
Magnetic Flux Density Bz 140 mT 14
Sensitivity S 1.33 %VDD/mT xx3: 30mT magnetic range 14
Sensitivity Accuracy -5 5 % X/Y magnetic axis; TA=25°C, VDD=VDDNOM, S=1%VDD/mT 14
Sensitivity Temperature Coefficient TCS 1100 ppm/°C First Order approximation; NdFeB 14
Sensitivity Temperature Coefficient Drift TCSdrift -500 500 ppm/°C Temperature drift around programmed TCS 14
Sensitivity Ratiometry -2.5 2.5 % / V 14
Linearity -0.5 0.5 % VDD=5V, output voltage within [0.5V;4.5V] 14
Linearity -1.5 1.5 % VDD=5V, output voltage within [0.25V;4.75V] 14
Sensitivity Mismatch -5 5 % X vs. Y, with/without gain adjustment 14
Output Offset Level VOQ 47.5 50 52.5 %VDD B=0mT, TA=25°C 15
Output Offset Temperature Drift -1.5 0 1.5 %VDD VDD=5V; B=0mT, S=1 %VDD/mT 15
Output Offset Ratiometry -2.5 2.5 % B=0mT; -10% < dVDD/VDD < 10% 15
Magnetic Angular Speed 0 25000 rpm 15
Signal Phase Shift PHI 1.8 Degree At 25000 rpm, high bandwidth programming 15
Output Update Rate 1.6 Sample/Degree At 25000 rpm, high bandwidth programming 15
Total Angular Error without Correction -10 10 Degree T=25°C 15
Total Angular Error without Correction -15 15 Degree -40°C ≤ T ≤ 150°C 15
Total Angular Error with Dynamic Compensation -1 1 Degree 15

CAD (KiCad official)

  • Symbol: MLX90380LGO-BAB-103-SP
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: mlx90380lgo-bab-103-sp-etched.step / mlx90380lgo-bab-103-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90380lgo-bab-103-sp.step / mlx90380lgo-bab-103-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (28 pp, sha256 627c0be542a94337, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF