← Commit history
README.md+77−62
@@ -8,14 +8,14 @@ MLX90372GDC-ACE-100-SP from Melexis, in a SOIC-8. Pinout and pin descriptions ex  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VDD | power_in | Supply pin for the sensor, with absolute maximum supply voltage of 28 V for less than 48 h at Tj below 175°C and 37 V for less than 60 s at TAMB of 35°C or below. |-| 2 | Input | passive | For test or application use; the pin is internally grounded in application, and unused pins should be connected to the PCB ground for optimal EMC behaviour. |-| 3 | Test | passive | For test or application use; the pin is internally grounded in application, and unused pins should be connected to the PCB ground for optimal EMC behaviour. |+| 1 | VDD | power_in | Supply pin; absolute maximum 28 V for under 48 h at Tj < 175°C and 37 V for under 60 s at TAMB ≤ 35°C, with reverse voltage limited to -14 V (<48 h) and -20 V (<1 h). |+| 2 | Input | input | For test or application; internally grounded in application, with a positive pin voltage limit of 6 V and reverse limit of -3 V. |+| 3 | Test | input | For test or application; internally grounded in application, with a positive pin voltage limit of 3.6 V and reverse limit of -0.3 V. | | 4 | N.C. | unconnected | Not connected. |-| 5 | OUT | output | Output pin carrying the SENT or PWM digital signal of the position measurement. |-| 6 | VSS | power_in | Digital ground of the device. |-| 7 | VDEC | passive | Decoupling pin for the internal supply, with an absolute maximum internal voltage of 3.6 V. |-| 8 | VSS | power_in | Analog ground of the device. |+| 5 | OUT | output | Output pin carrying the SENT or PWM signal; absolute maximum 28 V positive (<48 h) and -14 V reverse (<48 h). |+| 6 | VSS | power_in | Digital ground. |+| 7 | VDEC | passive | Decoupling pin for the internal supply; internal voltage absolute maximum 3.6 V and reverse limit -0.3 V. |+| 8 | VSS | power_in | Analog ground. |  ## Key specifications @@ -32,62 +32,77 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage (absolute max, long term) | VDD |  |  | 28 | V | < 48h ; Tj < 175°C | 11 |-| Supply Voltage (absolute max, short term) | VDD |  |  | 37 | V | < 60s ; TAMB ≤ 35°C | 11 |-| Reverse Voltage Protection | VDD-rev | -14 |  |  | V | < 48h | 11 |-| Reverse Voltage Protection | VDD-rev | -20 |  |  | V | < 1h | 11 |-| Positive Output Voltage | VOUT |  |  | 28 | V | < 48h | 11 |-| Reverse Output Voltage | VOUT-rev | -14 |  |  | V | < 48h | 11 |-| Internal Voltage | VDEC |  |  | 3.6 | V |  | 11 |-| Internal Voltage reverse | VDEC-rev | -0.3 |  |  | V |  | 11 |-| Positive Input pin Voltage | VInput |  |  | 6 | V |  | 11 |-| Reverse Input pin Voltage | VInput-rev | -3 |  |  | V |  | 11 |-| Positive Test pin Voltage | VTest |  |  | 3.6 | V |  | 11 |-| Reverse Test pin Voltage | VTest-rev | -0.3 |  |  | V |  | 11 |-| Operating Temperature | TAMB | -40 |  | 160 | °C |  | 11 |-| Junction Temperature | TJ |  |  | 175 | °C | see 18.17 for package thermal dissipation values | 11 |-| Storage Temperature | TST | -55 |  | 170 | °C |  | 11 |-| Magnetic Flux Density | Bmax | -1 |  | 1 | T |  | 11 |-| Supply Voltage (regulated) | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |-| Supply Voltage Battery | VDD | 6 | 12 | 18 | V | For Battery usage (4) | 12 |-| Supply Current | IDD | 9 | 10.5 | 12.6 | mA | Rotary and linear stray field applications (option code -100, -200, -500) | 12 |-| Surge Current | Isurge |  | 30 | 40 | mA | IC Startup current (tstartup < 40µs) | 12 |-| Start-up Level | VDDstart |  |  | 3.6 | V | Minimal supply start-up voltage | 12 |-| PTC Entry Level (rising) | VPROV0 | 7.1 | 7.35 | 7.7 | V | Supply overvoltage detection for 5V applications (4) | 12 |-| PTC Entry Level Hysteresis | VPROV0Hyst | 400 | 500 | 600 | mV | Supply overvoltage hysteresis | 12 |-| PTC Entry Level (rising) | VPROV1 | 21.5 | 23 | 24.5 | V | For Battery usage (4) | 12 |-| PTC Entry Level Hysteresis | VPROV1Hyst | 0.8 | 1.4 | 2 | V | For Battery usage (4) | 12 |-| Undervoltage detection high threshold | VDDUVH | 3.95 | 4.1 | 4.25 | V | Supply undervoltage high threshold | 12 |-| Undervoltage detection low threshold | VDDUVL | 3.75 | 3.9 | 4.05 | V | Supply undervoltage low threshold | 12 |-| Regulated Voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 12 |-| Regulated Voltage Overvoltage detection | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |-| Regulated Voltage Undervoltage detection | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |-| Regulated voltage UV / OV detection hysteresis | VDECOVHyst | 100 | 150 | 200 | mV |  | 12 |+| Absolute maximum supply voltage (<48h, Tj<175°C) | VDD |  |  | 28 | V | < 48h ; Tj < 175°C | 11 |+| Absolute maximum supply voltage (<60s) | VDD |  |  | 37 | V | < 60s ; TAMB ≤ 35°C | 11 |+| Reverse voltage protection (<48h) | VDD-rev | -14 |  |  | V | < 48h | 11 |+| Reverse voltage protection (<1h) | VDD-rev | -20 |  |  | V | < 1h | 11 |+| Positive output voltage | VOUT |  |  | 28 | V | < 48h | 11 |+| Reverse output voltage | VOUT-rev | -14 |  |  | V | < 48h | 11 |+| Internal voltage | VDEC |  |  | 3.6 | V |  | 11 |+| Reverse internal voltage | VDEC-rev | -0.3 |  |  | V |  | 11 |+| Positive input pin voltage | VInput |  |  | 6 | V |  | 11 |+| Reverse input pin voltage | VInput-rev | -3 |  |  | V |  | 11 |+| Positive test pin voltage | VTest |  |  | 3.6 | V |  | 11 |+| Reverse test pin voltage | VTest-rev | -0.3 |  |  | V |  | 11 |+| Operating temperature | TAMB | -40 |  | 160 | °C |  | 11 |+| Junction temperature | TJ |  |  | 175 | °C |  | 11 |+| Storage temperature | TST | -55 |  | 170 | °C |  | 11 |+| Magnetic flux density | Bmax | -1 |  | 1 | T |  | 11 |+| Supply voltage (regulated mode) | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |+| Supply voltage (battery) | VDD | 6 | 12 | 18 | V | For battery usage | 12 |+| Supply current (rotary/linear stray-field, -100/-200/-500) | IDD | 9 | 10.5 | 12.6 | mA | Rotary and linear stray field applications (option code -100, -200, -500) | 12 |+| Surge current | Isurge |  | 30 | 40 | mA | IC startup current (tstartup < 40µs) | 12 |+| Start-up level | VDDstart | 3.6 |  |  | V | Minimal supply start-up voltage | 12 |+| PTC entry level (rising), 5V applications | VPROV0 | 7.1 | 7.35 | 7.7 | V | Supply overvoltage detection for 5V applications | 12 |+| PTC entry level hysteresis, 5V applications | VPROV0Hyst | 400 | 500 | 600 | mV | Supply overvoltage hysteresis | 12 |+| PTC entry level (rising), battery | VPROV1 | 21.5 | 23 | 24.5 | V | For battery usage | 12 |+| PTC entry level hysteresis, battery | VPROV1Hyst | 0.8 | 1.4 | 2 | V | For battery usage | 12 |+| Supply undervoltage high threshold | VDDUVH | 3.95 | 4.1 | 4.25 | V |  | 12 |+| Supply undervoltage low threshold | VDDUVL | 3.75 | 3.9 | 4.05 | V |  | 12 |+| Regulated voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 12 |+| Regulated voltage overvoltage detection high threshold | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |+| Regulated voltage undervoltage detection low threshold | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |+| Regulated voltage UV/OV detection hysteresis | VDECOVHyst, VDECUVHyst | 100 | 150 | 200 | mV |  | 12 | | Digital supply | VDDD | 1.8 | 1.85 | 1.95 | V |  | 12 |-| Digital supply Overvoltage detection | VDDDOVH |  | 2 | 2.2 | V |  | 12 |-| Digital Supply Undervoltage detection | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on Reset low threshold | 12 |-| Digital Supply OV / UV detection Hysteresis | VPORHyst | 30 | 100 | 200 | mV |  | 12 |-| Output Short Circuit Current push-pull | IOUTshortPP | -25 |  | -10 | mA | Push-pull modes (SENT, PWM) VOUT = 0 V | 13 |-| Output Short Circuit Current push-pull | IOUTshortPP | 10 |  | 25 | mA | Push-pull modes (SENT, PWM) VOUT = 5 V .. 18V | 13 |-| Output Short Circuit Current SENT open drain | IOUTshortOD1 | 10 |  | 25 | mA | SENT Open Drain (see 13.1.1) VOUT = 5V | 13 |-| Output Short Circuit Current PWM open drain | IOUTshortOD2 | 25 |  | 90 | mA | PWM mode Open Drain only (see 13.1.1) | 13 |-| Digital output Ron | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision. Push-pull mode | 13 |-| Main Clock Frequency | FCK | 22.8 | 24 | 25.2 | MHz | Including thermal and lifetime drift | 14 |-| Main Clock initial tolerance | ΔFCK,0 | 23.75 | 24 | 24.25 | MHz | T=35°C | 14 |-| Main Clock Frequency Thermal Drift | ΔFCK,T | -2 |  | 2 | %Fck | Relative to clock frequency at 35°C. No ageing effects. | 14 |-| Intelligent Watchdog Timeout | TIWD | 19 | 20 | 21 | ms | FCK = 24MHz | 14 |-| Absolute Watchdog Timeout | TAWD | 19 | 20 | 21 | ms | F1M = 1MHz | 14 |-| Fail Safe state duration | TFSS | 9.8 | 11 | 11.9 | ms | After a digital single-event fault ACE / ADE versions | 14 |-| Safe Startup Time | TSafeStup |  | 11.2 | 12.4 | ms | Only valid for ACE / ADE versions (see. 7.3.1.2) | 14 |-| Internal Angle Measurement Period | TangleMeas | 528 | 588 |  | μs | Typical is default factory settings (no user control) | 15 |-| PWM Frequency | FPWM | 100 | 1000 | 2000 | Hz |  | 22 |-| PWM Frequency Initial Tolerances | ΔFPWM,0 | -1.5 |  | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 |-| PWM Frequency Drift | ΔFPWM | -5 |  | 5 | %FPWM | Over temperature and lifetime | 22 |-| XY - Intrinsic Linearity Error | LE_XY | -1 |  | 1 | Deg. |  | 29 |-| XY - Total Drift | ∂θTD_XY | -0.85 |  | 0.85 | Deg. | Relative to 35°C | 29 |-| Magnetic in-plane gradient of in-plane field component | ΔBX/ΔX | 3.8 |  | 10 | mT/mm | useful signal (Table 22) | 23 |-| Magnetic Flux Density in X-Y plane | BX, BY |  |  | 25 | mT | sqrt(BX²+BY²), not the useful signal | 23 |-| Magnet Temperature Coefficient | TCm | -2400 |  | 0 | ppm/°C |  | 23 |+| Digital supply overvoltage detection | VDDDOVH | 2 | 2.1 | 2.2 | V |  | 12 |+| Digital supply undervoltage detection (POR low threshold) | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on reset low threshold | 12 |+| Digital supply OV/UV detection hysteresis | VPORHyst | 30 | 100 | 200 | mV |  | 12 |+| Output short circuit current, push-pull | IOUTshortPP | -25 |  | -10 | mA | Push-pull modes (SENT, PWM), VOUT = 0 V | 13 |+| Output short circuit current, push-pull | IOUTshortPP | 10 |  | 25 | mA | Push-pull modes (SENT, PWM), VOUT = 5 V .. 18 V | 13 |+| Output short circuit current, SENT open drain | IOUTshortOD1 | 10 |  | 25 | mA | SENT open drain, VOUT = 5 V | 13 |+| Output short circuit current, PWM open drain | IOUTshortOD2 | 25 |  | 90 | mA | PWM mode open drain only | 13 |+| Output load, PWM pull-up/pull-down | RL | 3 |  |  | kΩ | PWM pull-up to 5V, PWM pull-down to 0V | 13 |+| Output load, SENT pull-up | RL | 10 |  | 55 | kΩ | SENT pull-up | 13 |+| Output load, open drain pull-up | RL | 1 |  | 100 | kΩ | Open drain pull-up | 13 |+| Digital push-pull output low level | VsatLoPP | 0 |  | 1 | %VDD | RL ≥ 10kΩ | 13 |+| Digital push-pull output high level | VsatHiPP | 98 | 99 | 100 | %VDD | RL ≥ 10kΩ | 13 |+| Digital push-pull output high level | VsatHiPP | 95 |  | 100 | %VDD | RL ≥ 3kΩ, pull-down | 13 |+| Digital open drain output low level | VsatLoOD | 0 |  | 10 | %Vext | Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA | 13 |+| Digital output on-resistance, push-pull (ACC/ACE) | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision, push-pull mode | 13 |+| Main clock frequency | FCK | 22.8 | 24 | 25.2 | MHz | Including thermal and lifetime drift | 14 |+| Main clock relative tolerance | FCK | -5 |  | 5 | %Fck | Relative tolerances, including thermal and lifetime drift | 14 |+| Main clock initial tolerance | ΔFCK,0 | 23.75 | 24 | 24.25 | MHz | T=35°C | 14 |+| Main clock frequency thermal drift | ΔFCK,T | -2 |  | 2 | %Fck | Relative to clock frequency at 35°C; no ageing effects | 14 |+| Intelligent watchdog timeout | TIWD | 19 | 20 | 21 | ms | FCK = 24MHz | 14 |+| Absolute watchdog timeout | TAWD | 19 | 20 | 21 | ms | F1M = 1MHz | 14 |+| Fail safe state duration (ACE/ADE) | TFSS | 9.8 | 11 | 11.9 | ms | After a digital single-event fault; ACE/ADE versions | 14 |+| Safe startup time | TSafeStup |  | 11.2 | 12.4 | ms | Only valid for ACE/ADE versions | 14 |+| Internal angle measurement period | TangleMeas | 528 | 588 |  | μs | Typical is default factory settings (no user control) | 15 |+| SENT frame tick count, asynchronous | NTframe | 282 |  |  | ticks | Do not change for asynchronous mode | 15 |+| SENT frame tick count (normal SENT, two angles per frame) | NTframe | 310 | 320 |  | ticks | Tick time 3μs (normal SENT), two angles per frame | 16 |+| SENT frame tick count (normal SENT, one angle per frame) | NTframe | 282 | 304 |  | ticks | Tick time 3μs (normal SENT), one angle per frame | 16 |+| SENT frame tick count (fast SENT, one angle per frame) | NTframe | 320 | 330 |  | ticks | Tick time 1.5μs (fast SENT), one angle per frame | 16 |+| SENT frame period (normal) | Tframe | 930 | 960 |  | μs | 3μs tick time with pause, two angles per frame (FCK = 24MHz) | 16 |+| SENT frame period (fast) | Tframe | 480 | 495 |  | μs | 1.5μs tick time with pause, one angle per frame (FCK = 24MHz) | 16 |+| Number of angles per frame | NangFram | 1 | 2 | 2 |  | Set by TWO_ANGLES_FRAME parameter | 16 |+| PWM frequency | FPWM | 100 | 1000 | 2000 | Hz |  | 22 |+| PWM frequency initial tolerance | ΔFPWM,0 | -1.5 |  | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 |+| PWM frequency thermal drift | ΔFPWM,T | -2 |  | 2 | %FPWM |  | 22 |+| PWM frequency drift | ΔFPWM | -5 |  | 5 | %FPWM | Over temperature and lifetime | 22 |+| PWM startup time (up to first sync edge) | Tstup2 | 7.1 | 7.6 | 16.6 | ms | Tstup1 + TPWM | 22 |+| PWM startup time (up to first data received) | Tstup3 | 7.6 | 8.6 | 26.6 | ms | Tstup1 + 2*TPWM | 22 |+| PWM rise time |  | 1 | 4.8 | 12 | μs | Measured between 1.1V and 3.8V | 22 |+| PWM fall time |  | 1 | 4.8 | 12 | μs | Measured between 1.1V and 3.8V | 22 |  ## CAD (KiCad official) 
mlx90372gdc-ace-100-sp-hero.overlay.json+261−256
@@ -1,260 +1,265 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "MLX90372GDC-ACE-100-SP",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 8,-      "span_mm": 6.9,-      "dash_mm": 0.1725,-      "gap_mm": 0.1035,-      "pad_stroke_mm": 0.0414-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 8,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "MLX90372GDC-ACE-100-SP",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 6.9,+   "dash_mm": 0.1725,+   "gap_mm": 0.1035,+   "pad_stroke_mm": 0.0414   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.552,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -2.11,-      2.11-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -2.205,-      2.205-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "mlx90372gdc-ace-100-sp-etched.glb",-    "glb_sha256": "87b9db2415007079084b01c410aa5824f54395938db67462a56e77800b3639a6",-    "footprint": "mlx90372gdc-ace-100-sp.kicad_mod",-    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",-    "pins": "page.json component.pins",-    "pins_sha256": "22e7db5da6e73ca712e14b4d43fb4736fedee8526d84dab880f5597f98592d70"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "VDD",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "Input",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "Test",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "N.C.",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "OUT",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "VSS",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "VDEC",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "VSS",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.552,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -2.11,+   2.11+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -2.205,+   2.205   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "mlx90372gdc-ace-100-sp-etched.glb",+  "glb_sha256": "87b9db2415007079084b01c410aa5824f54395938db67462a56e77800b3639a6",+  "footprint": "mlx90372gdc-ace-100-sp.kicad_mod",+  "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+  "pins": "page.json component.pins",+  "pins_sha256": "22e7db5da6e73ca712e14b4d43fb4736fedee8526d84dab880f5597f98592d70"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VDD",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "Input",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "Test",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "N.C.",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "OUT",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "VSS",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "VDEC",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "VSS",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
mlx90372gdc-ace-100-sp.kicad_sym+2−2
@@ -12,11 +12,11 @@       (name "VDD" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at -17.78 0.00 0) (length 5.08)+    (pin input line (at -17.78 0.00 0) (length 5.08)       (name "Input" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at -17.78 -2.54 0) (length 5.08)+    (pin input line (at -17.78 -2.54 0) (length 5.08)       (name "Test" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )
mlx90372gdc-ace-100-sp.lbr+4−2
@@ -94,8 +94,8 @@   <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">&gt;VALUE</text>   <pin name="VDD" x="-17.78" y="2.54" length="middle" direction="pwr"/>-  <pin name="Input" x="-17.78" y="0" length="middle" direction="pas"/>-  <pin name="Test" x="-17.78" y="-2.54" length="middle" direction="pas"/>+  <pin name="Input" x="-17.78" y="0" length="middle" direction="in"/>+  <pin name="Test" x="-17.78" y="-2.54" length="middle" direction="in"/>   <pin name="N.C." x="-17.78" y="-5.08" length="middle" direction="nc"/>   <pin name="VSS" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>   <pin name="VDEC" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>@@ -127,6 +127,8 @@           <attribute name="MANUFACTURER" value="Melexis" constant="no"/>           <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/ad25e7c7470e92fbf32d080c1102a1fe.pdf" constant="no"/>           <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mlx90372gdc-ace-100-sp" constant="no"/>+          <attribute name="MOUSER_PN" value="482-90372GDCACE100SP" constant="no"/>+          <attribute name="DIGIKEY_PN" value="MLX90372GDC-ACE-100-SP-ND" constant="no"/>           <attribute name="LCSC_PN" value="C1527023" constant="no"/>         </technology>       </technologies>
package.json+17−18
@@ -1,6 +1,6 @@ {   "slug": "mlx90372gdc-ace-100-sp",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Melexis Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,12 +54,11 @@       "mouser": "482-90372GDCACE100SP"     },     "distributor_check": {-      "checked_at": "2026-11-12T05:00:28Z",+      "checked_at": "2026-11-12T08:02:40Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MLX90372GDC-ACE-100-SP-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "482-90372GDCACE100SP",@@ -71,19 +70,19 @@         "number": "1",         "name": "VDD",         "type": "power_in",-        "description": "Supply pin for the sensor, with absolute maximum supply voltage of 28 V for less than 48 h at Tj below 175°C and 37 V for less than 60 s at TAMB of 35°C or below."+        "description": "Supply pin; absolute maximum 28 V for under 48 h at Tj < 175°C and 37 V for under 60 s at TAMB ≤ 35°C, with reverse voltage limited to -14 V (<48 h) and -20 V (<1 h)."       },       {         "number": "2",         "name": "Input",-        "type": "passive",-        "description": "For test or application use; the pin is internally grounded in application, and unused pins should be connected to the PCB ground for optimal EMC behaviour."+        "type": "input",+        "description": "For test or application; internally grounded in application, with a positive pin voltage limit of 6 V and reverse limit of -3 V."       },       {         "number": "3",         "name": "Test",-        "type": "passive",-        "description": "For test or application use; the pin is internally grounded in application, and unused pins should be connected to the PCB ground for optimal EMC behaviour."+        "type": "input",+        "description": "For test or application; internally grounded in application, with a positive pin voltage limit of 3.6 V and reverse limit of -0.3 V."       },       {         "number": "4",@@ -95,25 +94,25 @@         "number": "5",         "name": "OUT",         "type": "output",-        "description": "Output pin carrying the SENT or PWM digital signal of the position measurement."+        "description": "Output pin carrying the SENT or PWM signal; absolute maximum 28 V positive (<48 h) and -14 V reverse (<48 h)."       },       {         "number": "6",         "name": "VSS",         "type": "power_in",-        "description": "Digital ground of the device."+        "description": "Digital ground."       },       {         "number": "7",         "name": "VDEC",         "type": "passive",-        "description": "Decoupling pin for the internal supply, with an absolute maximum internal voltage of 3.6 V."+        "description": "Decoupling pin for the internal supply; internal voltage absolute maximum 3.6 V and reverse limit -0.3 V."       },       {         "number": "8",         "name": "VSS",         "type": "power_in",-        "description": "Analog ground of the device."+        "description": "Analog ground."       }     ],     "provenance": {@@ -127,11 +126,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin table is given per package, not per ordering option. MLX90372GDC-ACE-100-SP is the DC (SOIC-"+          "extractor flagged: Pins Input and Test are described only as 'For test or application'; the datasheet says they are int; VDEC is listed only as 'Decoupling pin'; its ERC type (passive) is my classification. The external d; The voltage limits in the descriptions come from the Absolute Maximum Ratings table (Table 8, page 1"         ],         "pages_sent": 29,-        "cost_usd": 0.0907,-        "at": "2026-11-12T05:00:19"+        "cost_usd": 0.0986,+        "at": "2026-11-12T08:02:21"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/ad25e7c7470e92fbf32d080c1102a1fe.pdf",@@ -186,13 +185,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "ce4b14b1e4e3abb0bda0136d517c77879a56a9a47ccc532cf12b54d52a88fe0e",+        "sha256": "2a6ed87794f6e8463bafca7be6c2d577659749853323309eb8aa3101678d4652",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DC (SOIC-8)",+      "package_code": "SOIC-8 (DC)",       "source_page": 70,       "D": {         "nom_mm": 4.89,
page.json+20−19
@@ -4,7 +4,7 @@   "slug": "mlx90372gdc-ace-100-sp",   "title": "MLX90372GDC-ACE-100-SP",   "brief": "Melexis Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,12 +36,11 @@       "mouser": "482-90372GDCACE100SP"     },     "distributor_check": {-      "checked_at": "2026-11-12T05:00:28Z",+      "checked_at": "2026-11-12T08:02:40Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MLX90372GDC-ACE-100-SP-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "482-90372GDCACE100SP",@@ -53,19 +52,19 @@         "number": "1",         "name": "VDD",         "type": "power_in",-        "description": "Supply pin for the sensor, with absolute maximum supply voltage of 28 V for less than 48 h at Tj below 175°C and 37 V for less than 60 s at TAMB of 35°C or below."+        "description": "Supply pin; absolute maximum 28 V for under 48 h at Tj < 175°C and 37 V for under 60 s at TAMB ≤ 35°C, with reverse voltage limited to -14 V (<48 h) and -20 V (<1 h)."       },       {         "number": "2",         "name": "Input",-        "type": "passive",-        "description": "For test or application use; the pin is internally grounded in application, and unused pins should be connected to the PCB ground for optimal EMC behaviour."+        "type": "input",+        "description": "For test or application; internally grounded in application, with a positive pin voltage limit of 6 V and reverse limit of -3 V."       },       {         "number": "3",         "name": "Test",-        "type": "passive",-        "description": "For test or application use; the pin is internally grounded in application, and unused pins should be connected to the PCB ground for optimal EMC behaviour."+        "type": "input",+        "description": "For test or application; internally grounded in application, with a positive pin voltage limit of 3.6 V and reverse limit of -0.3 V."       },       {         "number": "4",@@ -77,25 +76,25 @@         "number": "5",         "name": "OUT",         "type": "output",-        "description": "Output pin carrying the SENT or PWM digital signal of the position measurement."+        "description": "Output pin carrying the SENT or PWM signal; absolute maximum 28 V positive (<48 h) and -14 V reverse (<48 h)."       },       {         "number": "6",         "name": "VSS",         "type": "power_in",-        "description": "Digital ground of the device."+        "description": "Digital ground."       },       {         "number": "7",         "name": "VDEC",         "type": "passive",-        "description": "Decoupling pin for the internal supply, with an absolute maximum internal voltage of 3.6 V."+        "description": "Decoupling pin for the internal supply; internal voltage absolute maximum 3.6 V and reverse limit -0.3 V."       },       {         "number": "8",         "name": "VSS",         "type": "power_in",-        "description": "Analog ground of the device."+        "description": "Analog ground."       }     ],     "provenance": {@@ -109,11 +108,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin table is given per package, not per ordering option. MLX90372GDC-ACE-100-SP is the DC (SOIC-"+          "extractor flagged: Pins Input and Test are described only as 'For test or application'; the datasheet says they are int; VDEC is listed only as 'Decoupling pin'; its ERC type (passive) is my classification. The external d; The voltage limits in the descriptions come from the Absolute Maximum Ratings table (Table 8, page 1"         ],         "pages_sent": 29,-        "cost_usd": 0.0907,-        "at": "2026-11-12T05:00:19"+        "cost_usd": 0.0986,+        "at": "2026-11-12T08:02:21"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/ad25e7c7470e92fbf32d080c1102a1fe.pdf",@@ -168,13 +167,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "ce4b14b1e4e3abb0bda0136d517c77879a56a9a47ccc532cf12b54d52a88fe0e",+        "sha256": "2a6ed87794f6e8463bafca7be6c2d577659749853323309eb8aa3101678d4652",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DC (SOIC-8)",+      "package_code": "SOIC-8 (DC)",       "source_page": 70,       "D": {         "nom_mm": 4.89,@@ -948,5 +947,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Melexis Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file