3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90363KDC-ABB-000-TU
Melexis · Magnetic Sensors · SOIC-8
MLX90363KDC-ABB-000-TU from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Analog supply for the 5V application (4.5 V to 5.5 V) or 3V3 application (3.15 V to 3.45 V, shorted to VDEC); absolute maximum supply voltage is 18 V. |
| 2 | MISO | output | Master In Slave Out serial data output of the SPI interface, which is disabled above the MISO switch-off threshold (VDD 7.5 V to 9.5 V). |
| 3 | Test | bidirectional | Test pin (I/O); unused pins should be connected to ground for optimal EMC behavior. |
| 4 | SCLK | input | Serial clock input of the SPI interface. |
| 5 | /SS | input | Slave select input of the SPI interface. |
| 6 | MOSI | input | Master Out Slave In serial data input of the SPI interface. |
| 7 | VDEC | bidirectional | Analog decoupling pin in the 5V application (absolute maximum 3.6 V); in the 3V3 application it is shorted to VDD as supply. |
| 8 | VSS | power_in | Analog ground (GND) of the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Ambient Temperature Range | TA | -40 | 150 | Deg.C | 8 | ||
| Storage Temperature Range | TS | -40 | 150 | Deg.C | 8 | ||
| Supply Voltage, VDD | VDD | 18 | V | 8 | |||
| Reverse VDD Voltage | VDD | -0.3 | V | 8 | |||
| Supply Voltage, VDEC | VDEC | 3.6 | V | 8 | |||
| Reverse VDEC Voltage | VDEC | -0.3 | V | 8 | |||
| Positive Input Voltage | 11 | V | 8 | ||||
| Reverse Input Voltage | -11 | V | 8 | ||||
| Reverse Output Voltage | -0.3 | V | 8 | ||||
| Magnetic Flux Density | -700 | 700 | mT | 8 | |||
| Temperature grade K operating range | TA | -40 | 125 | Deg.C | Temperature code K (ordering legend) | 2 | |
| Nominal Supply Voltage | VDD5 | 4.5 | 5 | 5.5 | V | 5V Application | 9 |
| Nominal Supply Voltage | VDD33 | 3.15 | 3.3 | 3.45 | V | 3V3 Application | 9 |
| Supply Current (1) | IDD | 12.5 | 15.5 | mA | 9 | ||
| Standby Current | ISTANDBY | 3.5 | 4.5 | mA | 9 | ||
| Supply Current at VDD MAX | IDDMAX | 18 | mA | VDD = 18V | 9 | ||
| POR Rising Level | POR LH | 2.6 | 2.8 | 3.1 | V | Voltage referred to VDEC | 9 |
| POR Falling Level | POR HL | 2.5 | 2.7 | 2.9 | V | Voltage referred to VDEC | 9 |
| MISO Switch Off Rising Level | MT8V LH | 7.5 | 9.5 | V | VDD level for disabling MISO (2) | 9 | |
| MISO Switch Off Falling Level | MT8V HL | 6 | 7.5 | V | VDD level for disabling MISO (2) | 9 | |
| Output Low Voltage Level | VOL | 0.4 | V | Current Drive IOH = 0.5 mA | 9 | ||
| Output High Short Circuit Current | IshortH | 20 | 30 | mA | VOUT forced to 0V | 9 | |
| Output Low Short Circuit Current | IshortL | 25 | 30 | mA | VOUT forced to VDD | 9 | |
| MISO Rise Time | 35 | 60 | ns | CL = 30 pF, RL = 10 kΩ | 12 | ||
| MISO Fall Time | 35 | 60 | ns | CL = 30 pF, RL = 10 kΩ | 12 | ||
| Offset on the Raw Signals X, Y and Z | X0, Y0, Z0 | -30 | 30 | LSB14 | TA = 25 Deg.C | 12 | |
| Mismatch on the Raw Signals between X and Y | SMISMXY | -1 | 1 | % | TA = 25 Deg.C | 12 | |
| Mismatch on the Raw Signals between X and Z | SMISMXZ | -30 | 30 | % | TA = 25 Deg.C | 12 | |
| Mismatch on the Raw Signals between Y and Z | SMISMYZ | -30 | 30 | % | TA = 25 Deg.C | 12 | |
| Magnetic Angle Phase Error between X and Y | ORTHXY | -0.3 | 0.3 | Deg. | TA = 25 Deg.C | 12 | |
| Magnetic Angle Phase Error between X and Z | ORTHXZ | -10 | 10 | Deg. | TA = 25 Deg.C | 12 | |
| Magnetic Angle Phase Error between Y and Z | ORTHYZ | -10 | 10 | Deg. | TA = 25 Deg.C | 12 | |
| Intrinsic Linearity Error, Magnetic Angle XY | Le | -1 | 1 | Deg. | TA = 25 Deg.C | 13 | |
| Intrinsic Linearity Error, Magnetic Angle XZ, YZ | Le | -20 | 20 | Deg. | TA = 25 Deg.C | 13 | |
| Supply Dependency, 5V Application | -0.1 | 0.1 | Deg. | VDD = 4.5 … 5.5 V | 13 | ||
| Supply Dependency, 3V3 Application, 20 mT | -0.8 | 0.8 | Deg. | VDD = 3.20 … 3.40 V; Temperature suffix E and K; 20 mT | 13 | ||
| Supply Dependency, 3V3 Application, 50 mT | -0.4 | 0.4 | Deg. | VDD = 3.20 … 3.40 V; Temperature suffix E and K; 50 mT | 13 | ||
| Thermal Offset Drift | -30 | 30 | LSB14 | Temperature suffix E and K | 13 | ||
| Thermal Drift of Sensitivity Mismatch | -0.5 | 0.5 | % | XY axis, XZ axis, YZ axis; Temperature suffix E and K | 13 | ||
| Thermal Drift of Magnetic Angle Phase Error | -0.1 | 0.1 | Deg. | XY axis, XZ axis, YZ axis | 13 | ||
| Magnetic Flux Density in X or Y | BX, BY | 20 | 50 | 70 | mT | Above 70 mT the IMC saturates (13) | 14 |
| Magnetic Flux Density in Z | BZ | 24 | 75 | 126 | mT | 14 | |
| Magnet Temperature Coefficient | TCm | -2400 | 0 | ppm/Deg.C | 14 | ||
| IMC Gain in X and Y | GainIMCXY | 1.2 | 1.4 | 1.8 | Overall variation (14) | 14 | |
| IMC Gain in Z | GainIMCZ | 1.1 | 1.3 | Overall variation (14) | 14 | ||
| k factor | k | 1 | 1.2 | 1.5 | GainIMCXY / GainIMCZ | 14 |
CAD (KiCad official)
- Symbol:
MLX90363KDC-ABB-000-TU - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx90363kdc-abb-000-tu-etched.step/mlx90363kdc-abb-000-tu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90363kdc-abb-000-tu.step/mlx90363kdc-abb-000-tu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (62 pp, sha256
c24939cb1c7ab2e4, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).