main
Ray Publish 0.1.0 a09e5bf

MLX90333KGO-BCT-000-RE

Melexis · Angle, Linear Position Sensors · TSSOP-16

MLX90333KGO-BCT-000-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDIG1 power_in Digital supply pin for die 1 of the dual-die TSSOP-16 package; the extracted pages give no dedicated voltage limit for this pin.
2 VSS1 (Ground1) power_in Ground pin for die 1 of the dual-die TSSOP-16 package; the extracted pages give no dedicated electrical limit for this pin.
3 VDD1 power_in Supply pin for die 1; absolute maximum ratings for VDD are +20 V (overvoltage) and -10 V (reverse voltage protection).
4 Test 01 passive Test pin for die 1 that is recommended to be connected to ground for optimal EMC behavior.
5 Not Used / SS2 unconnected Not used in analog/PWM mode and left unconnected; in serial protocol mode this pin is the /SS2 slave select for die 2.
6 OUT22 / SCLK2 output Output 2 of die 2 (analog ratiometric or PWM); absolute maximum positive output voltage is +10 V (+14 V for 200 µs max at TA = +25 °C), output current is ±30 mA, reverse output voltage is -0.3 V and reverse output current is -50 mA; in serial mode it is the SCLK2 clock.
7 OUT12 / MOSI2 / MISO2 output Output 1 of die 2 (analog ratiometric or PWM) with absolute maximum positive output voltage +10 V (+14 V for 200 µs max at TA = +25 °C), output current ±30 mA, reverse output voltage -0.3 V and reverse output current -50 mA; in serial mode it carries MOSI2/MISO2.
8 Test 12 passive Test pin for die 2 that is recommended to be connected to ground for optimal EMC behavior.
9 VDIG2 power_in Digital supply pin for die 2 of the dual-die TSSOP-16 package; the extracted pages give no dedicated voltage limit for this pin.
10 VSS2 (Ground2) power_in Ground pin for die 2 of the dual-die TSSOP-16 package; the extracted pages give no dedicated electrical limit for this pin.
11 VDD2 power_in Supply pin for die 2; absolute maximum ratings for VDD are +20 V (overvoltage) and -10 V (reverse voltage protection).
12 Test 02 passive Test pin for die 2 that is recommended to be connected to ground for optimal EMC behavior.
13 Not Used / SS1 unconnected Not used in analog/PWM mode and left unconnected; in serial protocol mode this pin is the /SS1 slave select for die 1.
14 OUT21 / SCLK1 output Output 2 of die 1 (analog ratiometric or PWM) with absolute maximum positive output voltage +10 V (+14 V for 200 µs max at TA = +25 °C), output current ±30 mA, reverse output voltage -0.3 V and reverse output current -50 mA; in serial mode it is the SCLK1 clock.
15 OUT11 / MOSI1 / MISO1 output Output 1 of die 1 (analog ratiometric or PWM) with absolute maximum positive output voltage +10 V (+14 V for 200 µs max at TA = +25 °C), output current ±30 mA, reverse output voltage -0.3 V and reverse output current -50 mA; in serial mode it carries MOSI1/MISO1.
16 Test 11 passive Test pin for die 1 that is recommended to be connected to ground for optimal EMC behavior.

Key specifications

Parameter Value
Manufacturer Melexis
Package TSSOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (overvoltage) VDD 20 V 9
Reverse Voltage Protection -10 V 9
Positive Output Voltage (Analog or PWM) 10 V Both Outputs OUT1 and OUT2 9
Positive Output Voltage (transient) 14 V 200 s max, TA = + 25 Deg.C 9
Output Current (IOUT) IOUT -30 30 mA Both Outputs OUT1 and OUT2 9
Reverse Output Voltage -0.3 V Both Outputs OUT1 and OUT2 9
Reverse Output Current -50 mA Both Outputs OUT1 and OUT2 9
Operating Ambient Temperature Range TA -40 150 Deg.C 9
Storage Temperature Range TS -40 150 Deg.C 9
Magnetic Flux Density -4 4 T 9
Nominal Supply Voltage VDD 4.5 5 5.5 V 10
Supply Current, Slow mode IDD 8.5 11 mA Slow mode (3); per silicon die 10
Supply Current, Fast mode IDD 13.5 16 mA Fast mode (3); per silicon die 10
POR Level (POR Supply Under Voltage) VDD 2 2.7 3 V 10
Output Current, Analog Output mode IOUT -8 8 mA Analog Output mode 10
Output Current, PWM Output mode IOUT -20 20 mA PWM Output mode 10
Output Short Circuit Current Ishort 12 15 mA VOUT = 0 V 10
Output Short Circuit Current Ishort 24 45 mA VOUT = 14 V (TA = 25 Deg.C) 10
Output Load, Pull-down to Ground RL 1 10 kΩ Pull-down to Ground 10
Output Load, Pull-up to 5V RL 1 kΩ Pull-up to 5V (4) 10
Analog Saturation Output Level, low Vsat_lo 3 %VDD Pull-up load RL ≥ 10 kΩ 10
Analog Saturation Output Level, high Vsat_hi 96 %VDD Pull-down load RL ≥ 5 kΩ 10
Digital Saturation Output Level, low VsatD_lo 1.5 %VDD Pull-up Low Side RL ≥ 10 kΩ; Push-Pull (IOUT = -20mA) 10
Digital Saturation Output Level, high VsatD_hi 97 %VDD Push-Pull (IOUT = 20mA) 10
Active Diagnostic Output Level, low Diag_lo 1 %VDD Pull-down load RL ≥ 5 kΩ 10
Active Diagnostic Output Level, low Diag_lo 1.5 %VDD Pull-up load RL ≥ 10 kΩ 10
Active Diagnostic Output Level, high Diag_hi 96 %VDD Pull-down load RL ≥ 5 kΩ 10
Active Diagnostic Output Level, high Diag_hi 98 %VDD Pull-up load RL ≥ 5 kΩ 10
Passive Diagnostic Output Level BVSSPD 4 %VDD Broken VSS; Pull-down load RL ≤ 10 kΩ 10
Isolation Resistance 4 MΩ Between dice 12
Sampling Rate, Slow mode 600 1000 μs Slow mode (8) 12
Sampling Rate, Fast mode 200 330 μs Fast mode (8) 12
Step Response Time, Slow mode Ts 400 600 ms Slow mode (8), Filter = 5 (9) 12
Step Response Time, Fast mode Ts 4 μs Fast mode (8), Filter = 0 (9) 12
Analog Output Slew Rate 200 V/ms COUT = 42 nF 12
Analog Output Slew Rate 100 V/ms COUT = 100 nF 12
PWM Frequency FPWM 100 1000 Hz PWM Output Enabled 12
Digital Output Rise Time, Mode 5 120 μs Mode 5, 10 nF, RL = 10 kΩ 12
Digital Output Rise Time, Mode 7 2.2 μs Mode 7, 10 nF, RL = 10 kΩ 12
Digital Output Fall Time, Mode 5 1.8 μs Mode 5, 10 nF, RL = 10 kΩ 12
Digital Output Fall Time, Mode 7 1.9 μs Mode 7, 10 nF, RL = 10 kΩ 12
Maximum Field Amplitude Change vs Field Frequency -22 22 % AGC 64% (BCT only), Slow mode, Field Freq > 80Hz 13
Maximum Field Amplitude Change vs Field Frequency -30 30 % AGC 64% (BCT only), Slow mode, Field Freq = 50Hz 13
Maximum Field Amplitude Change vs Field Frequency -60 60 % AGC 64% (BCT only), Fast mode, Field Freq = 50Hz 13
Offset on the Raw Signals X, Y and Z X0, Y0, Z0 -60 60 LSB15 TA = 25 Deg.C 13
Mismatch on the Raw Signals, Between X and Y SMISMXY -1 1 % TA = 25 Deg.C 13
Mismatch on the Raw Signals, Between X and Z SMISMXZ -30 30 % TA = 25 Deg.C 13
Mismatch on the Raw Signals, Between Y and Z SMISMYZ -30 30 % TA = 25 Deg.C 13
Magnetic Angle Phase Error, Between X and Y ORTHXY -0.3 0.3 Deg. TA = 25 Deg.C 14
Magnetic Angle Phase Error, Between X and Z ORTHXZ -10 10 Deg. TA = 25 Deg.C 14
Magnetic Angle Phase Error, Between Y and Z ORTHYZ -10 10 Deg. TA = 25 Deg.C 14
Thermal Offset Drift #1 at the DSP input (excl. DAC and output stage) -60 60 LSB15 Temperature suffix S, E and K 14
Thermal Offset Drift #2 of the DAC and Output Stage -0.3 0.3 %VDD Temperature suffix S, E and K 14
Thermal Drift of Sensitivity Mismatch, Between X and Y ΔSMISMXY -0.3 0.3 % Temperature suffix S, E and K 14
Thermal Drift of Sensitivity Mismatch, Between X and Z ΔSMISMXZ -1 1 % Temperature suffix S, E and K 14
Thermal Drift of Sensitivity Mismatch, Between Y and Z ΔSMISMYZ -1 1 % Temperature suffix S, E and K 14
Magnetic Flux Density BX, BY BX, BY 20 50 70 mT 15
Operating Ambient Temperature Range, temperature suffix K TA -40 125 Deg.C Temperature suffix K (ordering legend) 6

CAD (KiCad official)

  • Symbol: MLX90333KGO-BCT-000-RE
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: mlx90333kgo-bct-000-re-etched.step / mlx90333kgo-bct-000-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90333kgo-bct-000-re.step / mlx90333kgo-bct-000-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (48 pp, sha256 cfb81ac4a1b5d0c5, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF