3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90109CDC-AAA-000-SP
Melexis · RF Chips · SOIC-8
MLX90109CDC-AAA-000-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COIL | bidirectional | Oscillator output that drives the parallel L-C antenna and also senses the transponder signal; voltage on COIL is limited to -0.3V to 15V and it should stay above about 0.5V saturation voltage for a driver current up to 14mA. |
| 2 | VSS | power_in | Ground reference; SPEED tied to VSS selects 4kbaud and MODE tied to VSS selects Biphase decoding. |
| 3 | SPEED | input | Data rate selection: VDD gives 2kbaud (400Hz to 3.6kHz filter) and VSS gives 4kbaud (800Hz to 7.2kHz filter). |
| 4 | MODU | input | Input for antenna amplitude setting where Vant = VDD - VMODU + Vos, VMODU should be above 0.8V for correct operation, and VMODU above Vpd (preferably VDD) enters power down. |
| 5 | MODE | input | Decoding mode selection: VSS gives Biphase, VDD gives Manchester, and floating (internally strapped to VDD/2) gives no decoding with the filtered data stream on DATA. |
| 6 | CLOCK | output | Open-drain clock output of the decoder that requires an external pull-up resistor (100k recommended), with data valid at its rising edge and VOL max 0.4V with Rpu above 2k. |
| 7 | DATA | output | Open-drain data output of the decoder that requires an external pull-up resistor (100k recommended), with VOL max 0.4V with Rpu above 2k. |
| 8 | VDD | power_in | Power supply, 3.1V to 5.5V operating with an absolute maximum of 6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Radio Frequency Chip/Antenna |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 3.1 | 5.5 | V | TA = -40°C to 85°C, Fres = 125kHz | 6 | |
| Resonance frequency | Fres | 100 | 125 | 150 | kHz | Depends on the resonance frequency of the antenna | 6 |
| Frequency drift with temperature | Fres(T) | -1 | 1 | % | Fres = 125 kHz | 6 | |
| Sensitivity | Vsens | 10 | 30 | mVpp | Depends on the application | 6 | |
| Amplitude offset | Vos | 0 | 0.15 | 0.35 | V | 6 | |
| Power down voltage (MODU pin) | Vpd | 4 | 4.9 | V | VDD=5V | 6 | |
| Power down voltage (MODU pin) | Vpd | 2.2 | 3 | V | VDD=3.1V | 6 | |
| Power up voltage (MODU pin) | Vpu | 3.2 | 4.3 | V | VDD=5V | 6 | |
| Power up voltage (MODU pin) | Vpu | 1.3 | 2.4 | V | VDD=3.1V | 6 | |
| Power down current | IDD,pn | 0 | 1.5 | μA | VMODU = VDD | 6 | |
| Supply current (excluding antenna supply current) | IDD | 1.8 | 3 | mA | VDD=5V, VMODU = 0.8V | 6 | |
| Antenna supply current | IDD,ant | 2.8 | mA | Depends on the application | 6 | ||
| Leakage current on pins COIL, MODE, SPEED, DATA | Ileak | 1 | μA | Power down | 6 | ||
| Output voltage DATA and CLOCK pin | Vol | 0.4 | V | Pull-up resistance Rpu > 2k | 6 | ||
| Supply voltage (absolute maximum) | VDD | -0.3 | 6 | Volts | VDD with respect to VSS, DC | 5 | |
| Input voltage on COIL, DATA and CLOCK | Vclamp | -0.3 | 15 | Volts | 5 | ||
| Maximum junction temperature | TJ | 150 | ºC | 5 | |||
| Operating temperature range (C grade) | 0 | 70 | °C | Temperature Code C | 1 |
CAD (KiCad official)
- Symbol:
MLX90109CDC-AAA-000-SP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx90109cdc-aaa-000-sp-etched.step/mlx90109cdc-aaa-000-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90109cdc-aaa-000-sp.step/mlx90109cdc-aaa-000-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (17 pp, sha256
a8bf49c0c56403f6, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).