component
MLR06A1R002F2
Public Made by Adomby adom
prosemi Current Sense Resistors / Shunt Resistors, 0612. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLR06A1R002F2
prosemi · Current Sense Resistors / Shunt Resistors · 0612
MLR06A1R002F2 from prosemi, in a 0612. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | prosemi |
| Package | 0612 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance | -1 | 1 | % | Part-number code F = ±1%. Table also prints ±1.0 (P/R)^1/2 % (P = rated power, R = resistance); formula not evaluated | 1 | ||
| Temperature coefficient of resistance | TCR | -70 | 70 | ppm/℃ | MLR06A, 1~2 mΩ row; TCR = (R-R0)/R0(T2-T1)×10^6, room temperature to 125℃ | 1 | |
| Operation temperature range | -55 | 150 | ℃ | MLR06A, all resistance ranges | 1 | ||
| Rated power | P | 1 | W | Power code 1 = 1W at 70℃; derated above 70℃ per curve (curve not numeric) | 1 | ||
| Resistance range | 1 | 2 | mΩ | MLR06A1 row, 1~2 mΩ, which contains this MPN (2 mΩ) | 1 | ||
| Short time overload resistance change | ΔR | -1 | 1 | % | 5 s at 4 times rated power; 0612, 1≤R≤10 mΩ | 4 | |
| Resistance to soldering heat resistance change | ΔR | -0.5 | 0.5 | % | 260℃±5℃, 12 s±0.5 s | 4 | |
| Temperature cycling resistance change | ΔR | -1 | 1 | % | -55℃ (15 min)/+150℃ (15 min), 300 cycles | 4 | |
| Low temperature storage resistance change | ΔR | -1 | 1 | % | -55℃, 1000 h, no power | 4 | |
| High temperature storage resistance change | ΔR | -1 | 1 | % | 150℃, 1000 h, no power | 4 | |
| Bias humidity resistance change | ΔR | -1 | 1 | % | +85℃, 85% RH, 10% bias, 1000 h; 0612 1.5~10 mΩ row | 4 | |
| Vibration resistance change | ΔR | -0.5 | 0.5 | % | 5 g, 10 Hz-2000 Hz, 12 cycles each of 3 orientations, 20 min | 4 | |
| Operational life resistance change | ΔR | -1 | 1 | % | 70℃±2℃, 1000 h at rated power (1.5 h on, 0.5 h off); 0612 1.5~9 mΩ row | 4 | |
| Moisture resistance resistance change | ΔR | -0.5 | 0.5 | % | MIL-STD-202 method 106, no power, 7b not required | 4 | |
| Reflow peak temperature | TP | 260 | ℃ | Pb-free reflow; time within 5℃ of peak 20-40 s; ramp-down 5℃/s max | 3 | ||
| Hand soldering temperature | 350 | ℃ | 5 seconds max | 3 | |||
| Storage temperature | 40 | ℃ | Storage; validity two years after manufacture | 6 | |||
| Storage relative humidity | RH | 75 | % | Storage; R.H. must be controlled less than 75% | 6 | ||
| Nominal resistance | R | 2 | mΩ | MPN code R002, decoded by the part-numbering rule (R001 = 1mΩ example) | 1 |
CAD (KiCad official)
- Symbol:
MLR06A1R002F2 - Footprint:
Resistor_SMD:R_0612_1632Metric - 3D model: 0612 (KiCad packages3D, STEP)
- 3D model files:
mlr06a1r002f2-etched.step/mlr06a1r002f2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlr06a1r002f2.step/mlr06a1r002f2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: prosemi datasheet (6 pp, sha256
0886d99b3aeb3bfe, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).