main
Ray
Publish 0.1.0
e4bce1e
ML63Q2537-NNNTBZWBY
ROHM Semicon · IC · TQFP-48(7x7)
ML63Q2537-NNNTBZWBY from ROHM Semicon, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SWD | bidirectional | Debugger data input/output with a pull-up input at reset; connect a pull-up resistor when unused. |
| 2 | SWC | input | Debugger clock input with a pull-up input at reset; connect a pull-up resistor when unused. |
| 3 | RESET_N | input | Reset input: a low level initializes the internal section and a subsequent high level starts program execution; no internal pull-up is connected, and it should be tied to VDD when unused. |
| 4 | VREF | power_in | Reference voltage positive input for the SA-ADC; connect to VDD when unused. |
| 5 | VREFN | input | Reference voltage negative input for the SA-ADC; connect to VSS when unused. |
| 6 | HXT0 | input | 20MHz or 40MHz crystal connection for the CAN interface or high-speed clock; external clock input is not supported and it is left open when unused. |
| 7 | HXT1 | output | Crystal connection for the high-speed oscillator, also a clock output; left open when unused. |
| 8 | VDDL | power_out | Internal logic supply from the internal regulator output; connect a 1µF capacitor between this pin and VSS. |
| 9 | VSS | power_in | Negative power supply pin; define this terminal potential as VSS. |
| 10 | VDD | power_in | Positive power supply pin; connect a capacitor of more than 1µF between this pin and VSS. |
| 11 | XT1 | bidirectional | 32.768kHz crystal connection for the low-speed clock, also usable as an external clock input; left open when unused. |
| 12 | XT0 | input | 32.768kHz crystal connection for the low-speed clock, with optional CDL and CGL capacitors to VSS; left open when unused. |
| 13 | P40 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SCKF0-2, RXDF3 and PWM00. |
| 14 | P41 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SOUTF0-2, TXDF3 and PWM01. |
| 15 | P42 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SINF0-2 and PWM10. |
| 16 | P43 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SSNF0-2 and PWM11. |
| 17 | P44 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions RXDF2 and PWM20. |
| 18 | P45 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions TXDF2 and PWM21. |
| 19 | P46 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP0P (comparator 0 + input) and RXDF1. |
| 20 | P47 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP0M (comparator 0 - input) and TXDF1. |
| 21 | P80 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP1P, LCKO and SDAF0-1; SDAF0 is N-channel open drain and needs an external pull-up when used for I2C. |
| 22 | P81 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP1M, HCKO and SCLF0-1; SCLF0 is N-channel open drain and needs an external pull-up when used for I2C. |
| 23 | P82 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP2P, RXDF3 and TMOUT4. |
| 24 | P83 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP2M, TXDF3 and TMOUT5. |
| 25 | VDD | power_in | Positive power supply pin; connect a capacitor of more than 1µF between this pin and VSS. |
| 26 | P32 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN0, SCKF0-1 and RXDF0. |
| 27 | P33 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN1, SOUTF0-1 and TXDF0. |
| 28 | P34 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN2, SINF0-1 and RXDF2. |
| 29 | P35 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN3, SSNF0-1 and TXDF2. |
| 30 | P36 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate function AIN4 (SA-ADC analog input 4). |
| 31 | P37 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate function AIN5 (SA-ADC analog input 5). |
| 32 | P50 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate function AIN6 (SA-ADC analog input 6). |
| 33 | P51 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN7 and TXDF1. |
| 34 | P52 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN8 and RXDF1. |
| 35 | P55 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN9 and TXDF3. |
| 36 | P56 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN10 and RXDF3. |
| 37 | P57 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN11, LTBC0 and LTBC1 (1Hz/2Hz output). |
| 38 | BRMPN | input | Remapping control input for firmware update; its level at reset release selects the Bank0 remap, has a pull-up input at reset, and is left open when unused. |
| 39 | P65 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions LCKO, TXDF1 and TMOUT3. |
| 40 | P64 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions HCKO, RXDF1 and TMOUT2. |
| 41 | P63 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SSNF1-1 and TXDF2. |
| 42 | P62 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SINF1-1 and RXDF2. |
| 43 | P61 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SOUTF1-1 and TXDF0. |
| 44 | P60 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SCKF1-1 and RXDF0. |
| 45 | P74 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SDAF0-2 (I2C, open drain, external pull-up needed) and TMOUT1. |
| 46 | P73 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SCLF0-2 (I2C, open drain, external pull-up needed) and TMOUT0. |
| 47 | P20 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CAN_RX0 (CAN bus 0 receive) and RXDF0. |
| 48 | P21 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CAN_TX0 (CAN bus 0 transmit) and TXDF0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | TQFP-48(7x7) |
| Category | |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage 1 | VDD | -0.3 | 6.5 | V | Ta=+25°C | 17 | |
| Power supply voltage 2 | VDDL | -0.3 | 2 | V | Ta=+25°C | 17 | |
| Input voltage 2 (HXT0, HXT1 pins) | VIN2 | -0.3 | 2 | V | Ta=+25°C | 17 | |
| H level output current 1pin | IOUTH | -12 | mA | Ta=25°C, 1pin | 17 | ||
| H level output current total | IOUTH | -60 | mA | Ta=25°C, total | 17 | ||
| L level output current 1pin | IOUTL | 16 | mA | Ta=25°C, 1pin | 17 | ||
| L level output current total | IOUTL | 60 | mA | Ta=25°C, total | 17 | ||
| Power dissipation | PD | 0.9 | W | Ta=+25°C | 17 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 17 | ||
| Operating temperature (Ambient) | Ta | -40 | 105 | °C | 17 | ||
| Operating temperature (Chip-Junction) | Tj | -40 | 115 | °C | 17 | ||
| Operating voltage | VDD | 2.3 | 5.5 | V | 17 | ||
| Operating frequency (CPU) HSCLK | fOP | 48 | MHz | HSCLK: up to 48M Hz | 17 | ||
| VDDL pin external capacitance tolerance | CL | -30 | 30 | % | 17 | ||
| Output voltage1 L level (all input/output port) | VOL1 | 1.5 | V | IOL1=+10mA VDD ≥ 4.5V | 20 | ||
| Output voltage1 L level (all input/output port) | VOL1 | 0.5 | V | IOL1=+1mA VDD ≥ 2.3V | 20 | ||
| Output voltage2 L level (N-ch open drain output mode) | VOL2 | 0.7 | V | IOL2=+15mA VDD ≥ 4.5V | 20 | ||
| Output voltage2 L level (N-ch open drain output mode) | VOL2 | 0.5 | V | IOL2=+8mA VDD ≥ 3.0V | 20 | ||
| Output voltage2 L level (N-ch open drain output mode) | VOL2 | 0.4 | V | IOL2=+3mA VDD ≥ 2.3V | 20 | ||
| Input current1 (RESET_N) H level | IIH1 | 1 | μA | VIH1=VDD | 20 | ||
| Input current1 (RESET_N) L level | IIL1 | -1 | μA | VIL1=VSS | 20 | ||
| Input current3 (all input/output port) pull-up mode | IIL3 | -250 | -30 | -2 | μA | VIL1=VSS (pull-up mode) | 20 |
| Input current3 pull-up resistance | V/IIL3 | 22 | 100 | 800 | kΩ | VIL1=VSS (pull-up mode) | 20 |
| Input current3 (all input/output port) high impedance H level | IIH3Z | 1 | μA | VIH1=VDD (High impedance mode) | 20 | ||
| Input current3 (all input/output port) high impedance L level | IIL3Z | -1 | μA | VIL1=VSS (High impedance mode) | 20 | ||
| H level output current1 1pin | IOH1 | -10 | mA | 1pin, VDD ≥ 4.5V | 21 | ||
| H level output current1 1pin | IOH1 | -1 | mA | 1pin, VDD ≥ 2.3V | 21 | ||
| H level output total current group C or D | IOH3 | -20 | mA | Total of group C or D (duty ≤ 50%), VDD ≥ 4.5V | 21 | ||
| H level output total current group C or D | IOH3 | -10 | mA | Total of group C or D (duty ≤ 50%), VDD ≥ 2.3V | 21 | ||
| L level output current1 1pin (CMOS output mode) | IOL1 | 10 | mA | 1pin (CMOS output mode), VDD ≥ 4.5V | 21 | ||
| L level output current1 1pin (CMOS output mode) | IOL1 | 1 | mA | 1pin (CMOS output mode), VDD ≥ 2.3V | 21 | ||
| L level output current2 1pin (N-ch open drain output mode) | IOL2 | 15 | mA | 1pin (N-ch open drain output mode), VDD ≥ 4.5V | 21 | ||
| L level output current2 1pin (N-ch open drain output mode) | IOL2 | 8 | mA | 1pin (N-ch open drain output mode), VDD ≥ 3.0V | 21 | ||
| L level output current2 1pin (N-ch open drain output mode) | IOL2 | 3 | mA | 1pin (N-ch open drain output mode), VDD ≥ 2.3V | 21 | ||
| L level output total current group A or B | IOL3 | 23 | mA | Total of group A or B (N-ch open drain output mode, duty≤50%), VDD ≥ 4.5V | 21 | ||
| L level output total current group A or B | IOL3 | 16 | mA | Total of group A or B (N-ch open drain output mode, duty≤50%), VDD ≥ 3.0V | 21 | ||
| L level output total current group A or B | IOL3 | 10 | mA | Total of group A or B (N-ch open drain output mode, duty≤50%), VDD ≥ 2.3V | 21 | ||
| RC32K frequency tolerance | fRCL1 | -2 | 2 | % | 22 | ||
| PLL oscillation frequency tolerance | fPLL1 | -1.5 | 1.5 | % | Tj=-40 to +95°C with RC32K | 22 | |
| PLL oscillation frequency tolerance | fPLL1 | -2 | 2 | % | Tj=-40 to +115°C with RC32K | 22 | |
| PLL oscillation stabilization time | TPLL | 5 | ms | 22 | |||
| Crystal oscillation start time (high speed) | TOSC | 3 | ms | 22 | |||
| Crystal oscillation start time (low speed) | TXTL | 2 | s | 23 | |||
| External clock input frequency tolerance | fEXCK | -1 | 1 | % | 23 | ||
| External clock input pulse width | tEXCKW | 14.5 | μs | 23 | |||
| EXI/TMCKI input frequency | fEXI | 4 | MHz | 24 | |||
| EXI/TMCKI input pulse width | tWPI1 | 50 | ns | When the analog filter is disabled | 24 | ||
| EXI/TMCKI input pulse width | tWPI2 | 250 | ns | When the analog filter is enabled | 24 | ||
| Low speed crystal oscillation frequency | fXTL | 32.768 | kHz | 17 | |||
| VDDL pin external capacitance | CL | 1 | μF | 17 | |||
| Package junction to ambient thermal resistance TQFP48 | θja | 45.8 | °C/W | PCB L1 (1 layer) | 18 | ||
| Package junction to ambient thermal resistance TQFP48 | θja | 42.6 | °C/W | PCB L2 (2 layer) | 18 | ||
| RC32K frequency | fRCL1 | 32.768 | kHz | 22 | |||
| PLL oscillation frequency | fPLL1 | 48 | MHz | Tj=-40 to +95°C with RC32K | 22 | ||
| External clock input frequency | fEXCK | 32.768 | kHz | 23 | |||
| STOP mode supply current IDD1 | IDD1 | 2 | 450 | μA | STOP, all clocks stopped, Tj ≤ +115°C | 19 | |
| HALT mode supply current IDD2 | IDD2 | 3.5 | 460 | μA | HALT (high speed oscillation off), RC32K oscillating, XT32K stopped | 19 | |
| CPU running supply current IDD3 | IDD3 | 27 | 500 | μA | CPU running, SYSCLK=32.768kHz, high speed oscillation off | 19 | |
| CPU running supply current IDD4 | IDD4 | 9 | 12 | mA | CPU running, SYSCLK=40MHz, high speed crystal oscillation 40MHz mode, HSCLK=40MHz | 19 | |
| CPU running supply current IDD5 | IDD5 | 10 | 12 | mA | CPU running, SYSCLK=48MHz, PLL mode, HSCLK=48MHz, high speed crystal oscillation stopped | 19 |
CAD (KiCad official)
- Symbol:
ML63Q2537-NNNTBZWBY - Footprint:
Package_QFP:TQFP-48_7x7mm_P0.5mm - 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
ml63q2537-nnntbzwby-etched.step/ml63q2537-nnntbzwby-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ml63q2537-nnntbzwby.step/ml63q2537-nnntbzwby.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (40 pp, sha256
3efe7f409438a0dd, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ML63Q2537-NNNTBZWBY
**ROHM Semicon** · IC · TQFP-48(7x7)
ML63Q2537-NNNTBZWBY from ROHM Semicon, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SWD | bidirectional | Debugger data input/output with a pull-up input at reset; connect a pull-up resistor when unused. |
| 2 | SWC | input | Debugger clock input with a pull-up input at reset; connect a pull-up resistor when unused. |
| 3 | RESET_N | input | Reset input: a low level initializes the internal section and a subsequent high level starts program execution; no internal pull-up is connected, and it should be tied to VDD when unused. |
| 4 | VREF | power_in | Reference voltage positive input for the SA-ADC; connect to VDD when unused. |
| 5 | VREFN | input | Reference voltage negative input for the SA-ADC; connect to VSS when unused. |
| 6 | HXT0 | input | 20MHz or 40MHz crystal connection for the CAN interface or high-speed clock; external clock input is not supported and it is left open when unused. |
| 7 | HXT1 | output | Crystal connection for the high-speed oscillator, also a clock output; left open when unused. |
| 8 | VDDL | power_out | Internal logic supply from the internal regulator output; connect a 1µF capacitor between this pin and VSS. |
| 9 | VSS | power_in | Negative power supply pin; define this terminal potential as VSS. |
| 10 | VDD | power_in | Positive power supply pin; connect a capacitor of more than 1µF between this pin and VSS. |
| 11 | XT1 | bidirectional | 32.768kHz crystal connection for the low-speed clock, also usable as an external clock input; left open when unused. |
| 12 | XT0 | input | 32.768kHz crystal connection for the low-speed clock, with optional CDL and CGL capacitors to VSS; left open when unused. |
| 13 | P40 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SCKF0-2, RXDF3 and PWM00. |
| 14 | P41 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SOUTF0-2, TXDF3 and PWM01. |
| 15 | P42 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SINF0-2 and PWM10. |
| 16 | P43 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SSNF0-2 and PWM11. |
| 17 | P44 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions RXDF2 and PWM20. |
| 18 | P45 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions TXDF2 and PWM21. |
| 19 | P46 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP0P (comparator 0 + input) and RXDF1. |
| 20 | P47 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP0M (comparator 0 - input) and TXDF1. |
| 21 | P80 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP1P, LCKO and SDAF0-1; SDAF0 is N-channel open drain and needs an external pull-up when used for I2C. |
| 22 | P81 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP1M, HCKO and SCLF0-1; SCLF0 is N-channel open drain and needs an external pull-up when used for I2C. |
| 23 | P82 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP2P, RXDF3 and TMOUT4. |
| 24 | P83 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CMP2M, TXDF3 and TMOUT5. |
| 25 | VDD | power_in | Positive power supply pin; connect a capacitor of more than 1µF between this pin and VSS. |
| 26 | P32 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN0, SCKF0-1 and RXDF0. |
| 27 | P33 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN1, SOUTF0-1 and TXDF0. |
| 28 | P34 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN2, SINF0-1 and RXDF2. |
| 29 | P35 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN3, SSNF0-1 and TXDF2. |
| 30 | P36 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate function AIN4 (SA-ADC analog input 4). |
| 31 | P37 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate function AIN5 (SA-ADC analog input 5). |
| 32 | P50 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate function AIN6 (SA-ADC analog input 6). |
| 33 | P51 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN7 and TXDF1. |
| 34 | P52 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN8 and RXDF1. |
| 35 | P55 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN9 and TXDF3. |
| 36 | P56 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN10 and RXDF3. |
| 37 | P57 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions AIN11, LTBC0 and LTBC1 (1Hz/2Hz output). |
| 38 | BRMPN | input | Remapping control input for firmware update; its level at reset release selects the Bank0 remap, has a pull-up input at reset, and is left open when unused. |
| 39 | P65 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions LCKO, TXDF1 and TMOUT3. |
| 40 | P64 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions HCKO, RXDF1 and TMOUT2. |
| 41 | P63 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SSNF1-1 and TXDF2. |
| 42 | P62 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SINF1-1 and RXDF2. |
| 43 | P61 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SOUTF1-1 and TXDF0. |
| 44 | P60 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SCKF1-1 and RXDF0. |
| 45 | P74 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SDAF0-2 (I2C, open drain, external pull-up needed) and TMOUT1. |
| 46 | P73 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions SCLF0-2 (I2C, open drain, external pull-up needed) and TMOUT0. |
| 47 | P20 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CAN_RX0 (CAN bus 0 receive) and RXDF0. |
| 48 | P21 | bidirectional | General-purpose I/O (high-impedance at reset) with alternate functions CAN_TX0 (CAN bus 0 transmit) and TXDF0. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | TQFP-48(7x7) |
| Category | |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage 1 | VDD | -0.3 | | 6.5 | V | Ta=+25°C | 17 |
| Power supply voltage 2 | VDDL | -0.3 | | 2 | V | Ta=+25°C | 17 |
| Input voltage 2 (HXT0, HXT1 pins) | VIN2 | -0.3 | | 2 | V | Ta=+25°C | 17 |
| H level output current 1pin | IOUTH | -12 | | | mA | Ta=25°C, 1pin | 17 |
| H level output current total | IOUTH | -60 | | | mA | Ta=25°C, total | 17 |
| L level output current 1pin | IOUTL | | | 16 | mA | Ta=25°C, 1pin | 17 |
| L level output current total | IOUTL | | | 60 | mA | Ta=25°C, total | 17 |
| Power dissipation | PD | | | 0.9 | W | Ta=+25°C | 17 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 17 |
| Operating temperature (Ambient) | Ta | -40 | | 105 | °C | | 17 |
| Operating temperature (Chip-Junction) | Tj | -40 | | 115 | °C | | 17 |
| Operating voltage | VDD | 2.3 | | 5.5 | V | | 17 |
| Operating frequency (CPU) HSCLK | fOP | | | 48 | MHz | HSCLK: up to 48M Hz | 17 |
| VDDL pin external capacitance tolerance | CL | -30 | | 30 | % | | 17 |
| Output voltage1 L level (all input/output port) | VOL1 | | | 1.5 | V | IOL1=+10mA VDD ≥ 4.5V | 20 |
| Output voltage1 L level (all input/output port) | VOL1 | | | 0.5 | V | IOL1=+1mA VDD ≥ 2.3V | 20 |
| Output voltage2 L level (N-ch open drain output mode) | VOL2 | | | 0.7 | V | IOL2=+15mA VDD ≥ 4.5V | 20 |
| Output voltage2 L level (N-ch open drain output mode) | VOL2 | | | 0.5 | V | IOL2=+8mA VDD ≥ 3.0V | 20 |
| Output voltage2 L level (N-ch open drain output mode) | VOL2 | | | 0.4 | V | IOL2=+3mA VDD ≥ 2.3V | 20 |
| Input current1 (RESET_N) H level | IIH1 | | | 1 | μA | VIH1=VDD | 20 |
| Input current1 (RESET_N) L level | IIL1 | -1 | | | μA | VIL1=VSS | 20 |
| Input current3 (all input/output port) pull-up mode | IIL3 | -250 | -30 | -2 | μA | VIL1=VSS (pull-up mode) | 20 |
| Input current3 pull-up resistance | V/IIL3 | 22 | 100 | 800 | kΩ | VIL1=VSS (pull-up mode) | 20 |
| Input current3 (all input/output port) high impedance H level | IIH3Z | | | 1 | μA | VIH1=VDD (High impedance mode) | 20 |
| Input current3 (all input/output port) high impedance L level | IIL3Z | -1 | | | μA | VIL1=VSS (High impedance mode) | 20 |
| H level output current1 1pin | IOH1 | -10 | | | mA | 1pin, VDD ≥ 4.5V | 21 |
| H level output current1 1pin | IOH1 | -1 | | | mA | 1pin, VDD ≥ 2.3V | 21 |
| H level output total current group C or D | IOH3 | -20 | | | mA | Total of group C or D (duty ≤ 50%), VDD ≥ 4.5V | 21 |
| H level output total current group C or D | IOH3 | -10 | | | mA | Total of group C or D (duty ≤ 50%), VDD ≥ 2.3V | 21 |
| L level output current1 1pin (CMOS output mode) | IOL1 | | | 10 | mA | 1pin (CMOS output mode), VDD ≥ 4.5V | 21 |
| L level output current1 1pin (CMOS output mode) | IOL1 | | | 1 | mA | 1pin (CMOS output mode), VDD ≥ 2.3V | 21 |
| L level output current2 1pin (N-ch open drain output mode) | IOL2 | | | 15 | mA | 1pin (N-ch open drain output mode), VDD ≥ 4.5V | 21 |
| L level output current2 1pin (N-ch open drain output mode) | IOL2 | | | 8 | mA | 1pin (N-ch open drain output mode), VDD ≥ 3.0V | 21 |
| L level output current2 1pin (N-ch open drain output mode) | IOL2 | | | 3 | mA | 1pin (N-ch open drain output mode), VDD ≥ 2.3V | 21 |
| L level output total current group A or B | IOL3 | | | 23 | mA | Total of group A or B (N-ch open drain output mode, duty≤50%), VDD ≥ 4.5V | 21 |
| L level output total current group A or B | IOL3 | | | 16 | mA | Total of group A or B (N-ch open drain output mode, duty≤50%), VDD ≥ 3.0V | 21 |
| L level output total current group A or B | IOL3 | | | 10 | mA | Total of group A or B (N-ch open drain output mode, duty≤50%), VDD ≥ 2.3V | 21 |
| RC32K frequency tolerance | fRCL1 | -2 | | 2 | % | | 22 |
| PLL oscillation frequency tolerance | fPLL1 | -1.5 | | 1.5 | % | Tj=-40 to +95°C with RC32K | 22 |
| PLL oscillation frequency tolerance | fPLL1 | -2 | | 2 | % | Tj=-40 to +115°C with RC32K | 22 |
| PLL oscillation stabilization time | TPLL | | | 5 | ms | | 22 |
| Crystal oscillation start time (high speed) | TOSC | | | 3 | ms | | 22 |
| Crystal oscillation start time (low speed) | TXTL | | | 2 | s | | 23 |
| External clock input frequency tolerance | fEXCK | -1 | | 1 | % | | 23 |
| External clock input pulse width | tEXCKW | 14.5 | | | μs | | 23 |
| EXI/TMCKI input frequency | fEXI | | | 4 | MHz | | 24 |
| EXI/TMCKI input pulse width | tWPI1 | 50 | | | ns | When the analog filter is disabled | 24 |
| EXI/TMCKI input pulse width | tWPI2 | 250 | | | ns | When the analog filter is enabled | 24 |
| Low speed crystal oscillation frequency | fXTL | | 32.768 | | kHz | | 17 |
| VDDL pin external capacitance | CL | | 1 | | μF | | 17 |
| Package junction to ambient thermal resistance TQFP48 | θja | | 45.8 | | °C/W | PCB L1 (1 layer) | 18 |
| Package junction to ambient thermal resistance TQFP48 | θja | | 42.6 | | °C/W | PCB L2 (2 layer) | 18 |
| RC32K frequency | fRCL1 | | 32.768 | | kHz | | 22 |
| PLL oscillation frequency | fPLL1 | | 48 | | MHz | Tj=-40 to +95°C with RC32K | 22 |
| External clock input frequency | fEXCK | | 32.768 | | kHz | | 23 |
| STOP mode supply current IDD1 | IDD1 | | 2 | 450 | μA | STOP, all clocks stopped, Tj ≤ +115°C | 19 |
| HALT mode supply current IDD2 | IDD2 | | 3.5 | 460 | μA | HALT (high speed oscillation off), RC32K oscillating, XT32K stopped | 19 |
| CPU running supply current IDD3 | IDD3 | | 27 | 500 | μA | CPU running, SYSCLK=32.768kHz, high speed oscillation off | 19 |
| CPU running supply current IDD4 | IDD4 | | 9 | 12 | mA | CPU running, SYSCLK=40MHz, high speed crystal oscillation 40MHz mode, HSCLK=40MHz | 19 |
| CPU running supply current IDD5 | IDD5 | | 10 | 12 | mA | CPU running, SYSCLK=48MHz, PLL mode, HSCLK=48MHz, high speed crystal oscillation stopped | 19 |
## CAD (KiCad official)
- Symbol: `ML63Q2537-NNNTBZWBY`
- Footprint: `Package_QFP:TQFP-48_7x7mm_P0.5mm`
- 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `ml63q2537-nnntbzwby-etched.step` / `ml63q2537-nnntbzwby-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ml63q2537-nnntbzwby.step` / `ml63q2537-nnntbzwby.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ROHM Semicon datasheet](https://fscdn.rohm.com/lapis/en/products/databook/datasheet/ic/micon/FEDL63Q2500.pdf) (40 pp, sha256 `3efe7f409438a0dd`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ml63q2537-nnntbzwby-datasheet.pdf)