main
History Download
Ray Publish 0.1.0 34c7b22

MKL27Z256VFT4

NXP Semicon · Pre-ordered MCUs · QFN-48-EP(7x7)

MKL27Z256VFT4 from NXP Semicon, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Digital supply pin; device operating range is 1.71 to 3.6 V.
2 VSS power_in Digital ground.
3 USB0_DP bidirectional USB 2.0 full-speed D+ data line.
4 USB0_DM bidirectional USB 2.0 full-speed D- data line.
5 VOUT33 power_out Output of the on-chip USB 3.3 V regulator.
6 VREGIN power_in Input to the on-chip USB voltage regulator.
7 PTE20 bidirectional GPIO port E bit 20, default ADC0_DP0/ADC0_SE0; also TPM1_CH0, LPUART0_TX, FXIO0_D4.
8 PTE21 bidirectional GPIO port E bit 21, default ADC0_DM0/ADC0_SE4a; also TPM1_CH1, LPUART0_RX, FXIO0_D5.
9 VDDA power_in Analog supply pin.
10 VREFH passive ADC voltage reference high; can act as VREF_OUT when the VREFV1 module is enabled.
11 VREFL passive ADC voltage reference low.
12 VSSA power_in Analog ground.
13 PTE29 bidirectional GPIO port E bit 29, default CMP0_IN5/ADC0_SE4b; also TPM0_CH2, TPM_CLKIN0.
14 PTE30 bidirectional GPIO port E bit 30, default DAC0_OUT/ADC0_SE23/CMP0_IN4; also TPM0_CH3, TPM_CLKIN1, LPUART1_TX, LPTMR0_ALT1.
15 PTE24 bidirectional GPIO port E bit 24, disabled by default; also TPM0_CH0, I2C0_SCL.
16 PTE25 bidirectional GPIO port E bit 25, disabled by default; also TPM0_CH1, I2C0_SDA.
17 PTA0 bidirectional GPIO port A bit 0, default SWD_CLK; also TPM0_CH5.
18 PTA1 bidirectional GPIO port A bit 1, disabled by default; also LPUART0_RX, TPM2_CH0.
19 PTA2 bidirectional GPIO port A bit 2, disabled by default; also LPUART0_TX, TPM2_CH1.
20 PTA3 bidirectional GPIO port A bit 3, default SWD_DIO; also I2C1_SCL, TPM0_CH0.
21 PTA4 bidirectional GPIO port A bit 4, default NMI_b; also I2C1_SDA, TPM0_CH1.
22 VDD power_in Digital supply pin; device operating range is 1.71 to 3.6 V.
23 VSS power_in Digital ground.
24 PTA18 bidirectional GPIO port A bit 18, default EXTAL0 crystal input; also LPUART1_RX, TPM_CLKIN0.
25 PTA19 bidirectional GPIO port A bit 19, default XTAL0 crystal output; also LPUART1_TX, TPM_CLKIN1, LPTMR0_ALT1.
26 PTA20 bidirectional GPIO port A bit 20, default RESET_b external reset.
27 PTB0/LLWU_P5 bidirectional GPIO port B bit 0, default ADC0_SE8; also LLWU_P5 wakeup, I2C0_SCL, TPM1_CH0.
28 PTB1 bidirectional GPIO port B bit 1, default ADC0_SE9; also I2C0_SDA, TPM1_CH1.
29 PTB2 bidirectional GPIO port B bit 2, default ADC0_SE12; also I2C0_SCL, TPM2_CH0.
30 PTB3 bidirectional GPIO port B bit 3, default ADC0_SE13; also I2C0_SDA, TPM2_CH1.
31 PTB16 bidirectional GPIO port B bit 16, disabled by default; also SPI1_MOSI, LPUART0_RX, TPM_CLKIN0, SPI1_MISO.
32 PTB17 bidirectional GPIO port B bit 17, disabled by default; also SPI1_MISO, LPUART0_TX, TPM_CLKIN1, SPI1_MOSI.
33 PTC0 bidirectional GPIO port C bit 0, default ADC0_SE14; also EXTRG_IN, audioUSB_SOF_OUT, CMP0_OUT, I2S0_TXD0.
34 PTC1/LLWU_P6/RTC_CLKIN bidirectional GPIO port C bit 1, default ADC0_SE15; also LLWU_P6 wakeup, RTC_CLKIN, I2C1_SCL, TPM0_CH0, I2S0_TXD0.
35 PTC2 bidirectional GPIO port C bit 2, default ADC0_SE11; also I2C1_SDA, TPM0_CH1, I2S0_TX_FS.
36 PTC3/LLWU_P7 bidirectional GPIO port C bit 3, disabled by default; also LLWU_P7 wakeup, SPI1_SCK, LPUART1_RX, TPM0_CH2, CLKOUT, I2S0_TX_BCLK.
37 PTC4/LLWU_P8 bidirectional GPIO port C bit 4, disabled by default; also LLWU_P8 wakeup, SPI0_SS, LPUART1_TX, TPM0_CH3, I2S0_MCLK.
38 PTC5/LLWU_P9 bidirectional GPIO port C bit 5, disabled by default; also LLWU_P9 wakeup, SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0, CMP0_OUT.
39 PTC6/LLWU_P10 bidirectional GPIO port C bit 6, default CMP0_IN0; also LLWU_P10 wakeup, SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO, I2S0_MCLK.
40 PTC7 bidirectional GPIO port C bit 7, default CMP0_IN1; also SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS, SPI0_MOSI.
41 PTD0 bidirectional GPIO port D bit 0, disabled by default; also SPI0_SS, TPM0_CH0, FXIO0_D0.
42 PTD1 bidirectional GPIO port D bit 1, default ADC0_SE5b; also SPI0_SCK, TPM0_CH1, FXIO0_D1.
43 PTD2 bidirectional GPIO port D bit 2, disabled by default; also SPI0_MOSI, UART2_RX, TPM0_CH2, SPI0_MISO, FXIO0_D2.
44 PTD3 bidirectional GPIO port D bit 3, disabled by default; also SPI0_MISO, UART2_TX, TPM0_CH3, SPI0_MOSI, FXIO0_D3.
45 PTD4/LLWU_P14 bidirectional GPIO port D bit 4, disabled by default; also LLWU_P14 wakeup, SPI1_SS, UART2_RX, TPM0_CH4, FXIO0_D4.
46 PTD5 bidirectional GPIO port D bit 5, default ADC0_SE6b; also SPI1_SCK, UART2_TX, TPM0_CH5, FXIO0_D5.
47 PTD6/LLWU_P15 bidirectional GPIO port D bit 6, default ADC0_SE7b; also LLWU_P15 wakeup, SPI1_MOSI, LPUART0_RX, SPI1_MISO, FXIO0_D6.
48 PTD7 bidirectional GPIO port D bit 7, disabled by default; also SPI1_MISO, LPUART0_TX, SPI1_MOSI, FXIO0_D7.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

CAD (KiCad official)

  • Symbol: MKL27Z256VFT4
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: mkl27z256vft4-etched.step / mkl27z256vft4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkl27z256vft4.step / mkl27z256vft4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (67 pp, sha256 71c160185f0967a8, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF